Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

SICAK PRESLEME YÖNTEMİ İLE ÜRETİLMİŞ AZ91/TiNi KOMPOZİTLERİNİN MİKROYAPISI

1st INTERNATIONAL SYMPOSIUM ON LIGTH ALLOYS AND COMPOSİTE MATERIALS (ISLAC’xx18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.290-291

TiNi İLE TAKVİYE EDİLMİŞ Mg MATRİSLİ KOMPOZİTLERİN SICAK PRESLEME YÖNTEMİ İLE ÜRETİLMESİ

1st INTERNATIONAL SYMPOSIUM ON LIGTH ALLOYS AND COMPOSİTE MATERIALS (ISLAC’xx18), 22 - 24 Mart 2018, ss.288-289

Production of Aluminum Composites Containing TiB2 and Al2O3 Particles

4th International Conference on Natural and Engineering Science, Muğla, Türkiye, 9 - 12 Ekim 2018, ss.44

Mg/NiTi METAL MATRİSLİ KOMPOZİTLERİN KOROZYON DUYARLILIKLARI

15th INTERNATIONAL CORROSION SYMPOSIUM (KORSEM’xx18), 26 - 28 Eylül 2018

Mg/NiTi metal matrisli kompozitlerin korozyon duyarlılıkları

XVth International Corrosion Symposium, Hatay, Türkiye, 26 - 28 Eylül 2018, ss.19

Mg/NiTi metal matrisli kompozitlerin korozyon duyarlılıkları

XVth International Corrosion Symposium, Hatay, Türkiye, 26 - 28 Eylül 2018, ss.19

TiNi İLE TAKVİYE EDİLMİŞ MAGNEZYUM MATRİSLİ KOMPOZİTLERİN YÜKSEK SICAKLIK MEKANİK ÖZELLİKLERİ

3. INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND TECHNOLOGY IN CAPPADOCIA (IMSTEC 2018), 17 - 19 Eylül 2018

TOZ METALÜRJİSİ YÖNTEMİ İLE ÜRETİLMİŞ TiNi/AZ91D KOMPOZİTLERİNİN ODA SICAKLIĞI VE YÜKSEK SICAKLIK MUKAVEMETLERİ

3. INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND TECHNOLOGY IN CAPPADOCIA (IMSTEC 2018), 17 - 19 Eylül 2018

Renewed Furnace Design for Increasing Heating Rate in Aluminum Matrix Composite Production

International Symposium on Innovative Approaches in Scientific Studie, Antalya, Türkiye, 11 - 13 Nisan 2018, ss.189

Effect of Cooling Rate Applied to Aluminum Composites on Hardness and Wear Resistance

International Symposium on Innovative Approaches in Scientific Studies, Antalya, Türkiye, 11 - 13 Nisan 2018, ss.475

A Review on The Hydrogels Used in 3D Bioprinting

3rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2018, Antalya, Türkiye, 19 - 21 Nisan 2018, ss.135-138

TiNi ŞEKİL BELLEKLİ ALAŞIMLARLA TAKVİYE EDİLMİŞ MAGNEZYUM BAZLI KOMPOZİTLERDE FAZ DÖNÜŞÜMLERİ

THE INTERNATİNONAL CONFERENCE ON MATERİALS SCİENCE, MECHANİCAL AND AUTOMOTİVE ENGİNEERİNGS AND TECHNOLOGY IN ÇEŞME/İZMİR (IMSMATEC’18), 10 - 12 Nisan 2018

Alüminyum Kompozit Malzemelerin Otomobil Parçalarında Kullanımı

International Vocational Science Symposium, Antalya, Türkiye, 18 - 20 Ekim 2017, ss.105

Determination of Epoxy Resin’s Mechanical Properties Reinforced with Nanofibers Obtained from PVP Polymer by Electrospinning Method

II. International Conference on Advanced Engineering Technologies - ICADET 2017, Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1442

The effect of corrosion on the microstructure of the Al-5Cu matrix composites reinforced with TiC particles

European Congress and Exhibition on Advanced Materials and Processes (EUROMAT2017), Thessaloniki, Yunanistan, 17 - 22 Eylül 2017

Production of Aluminum Metal Matrix Composites with Al2O3 and TiC

3rd INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2016), Antalya, Türkiye, 19 - 24 Ekim 2016, ss.478

Production of Aluminum Metal Matrix Composites with Al2O3 and TiC

3rd INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2016), Antalya, Türkiye, 19 - 24 Ekim 2016, ss.478

Synthesis of and Al2O3 and TiB2 Ceramic Particles in Aluminum Matrix

International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), Antalya, Türkiye, 19 - 24 Ekim 2016, ss.462

MAGNEZYUM VE ALAŞIMLARININ YÜKSEK SICAKLIK DAYANIMLARINI GELİŞTİRMEDEŞEKİL BELLEKLİ MALZEMELERİN KULLANIMI

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.538-543

IN SITU ALÜMİNYUM MATRİSLİ KOMPOZİTLERİN FARKLIPARAMETRELERLE ÜRETİMİ

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.177-182

Production of Metal Matrix Composites by In situ Techniques

2nd Global Conference on Materials Sciences, Nicosia, 15 - 17 Ekim 2015

Deney Parametrelerinin Alüminyum Metal Matrisli Kompozitlerin Üretimi Üzerine Etkileri

IMCOFE’15 : International Multidisciplinary Congree of Eurasia, ÜSKÜP, 1 - 05 Eylül 2015, ss.256-261

Production, characterization, and mechanical behavior of Al based metal matrix composites incorporating TiC particles

17th International Conference on the Strength of Materials (ICSMA-17), Brno, Çek Cumhuriyeti, 9 - 14 Ağustos 2015, ss.43

Production characterization and mechanical behavior of Al based metal matrix composites incorporating TiC particles

17th International Conference on the Strength of Materials (ICSMA-17), Brno, Çek Cumhuriyeti, 9 - 14 Ağustos 2015

The effect of sintering time on the corrosion behavior of in-situ Al-Cu/Al2O3 nanocomposites

The 10th National Conference on Nanoscience and Nanotechnology (NanoTR-10), İstanbul, Türkiye, 17 - 21 Haziran 2014, ss.43

The effect of sintering time on the corrosion behavior of in-situ Al-Cu/Al2O3 nanocomposites

The 10th National Conference on Nanoscience and Nanotechnology (NanoTR-10), İstanbul, Türkiye, 17 - 21 Haziran 2014, ss.43

What Are the Harmful Effects of Corrosion?

International Environmental Sciences Symposium of Van (IESSV14), Van, Türkiye, 4 - 07 Haziran 2014, ss.43

What Are the Harmful Effects of Corrosion?

International Environmental Sciences Symposium of Van (IESSV14), Van, Türkiye, 4 - 07 Haziran 2014, ss.43

Corrosion susceptibilities of under and over aged Al/TiC three-layered composites produced by hot-pressing

5th Powder Metallurgy Symposium & Exhibition, Kuala Lumpur, Malezya, 9 - 10 Ağustos 2011, ss.43

Corrosion susceptibilities of under and over aged Al/TiC three-layered composites produced by hot-pressing

5th Powder Metallurgy Symposium & Exhibition, Kuala Lumpur, Malezya, 9 - 10 Ağustos 2011, ss.43

Biyoseramik Kaplamanin AA6061-T4 Alasiminda Korozyon Direncine Etkisi

IATS’11: INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM, Elazığ, Türkiye, 24 - 26 Haziran 2011, ss.415-421

Biyoseramik Kaplamanin AA6061-T4 Alasiminda Korozyon Direncine Etkisi

IATS’11: INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM, Elazığ, Türkiye, 24 - 26 Haziran 2011, ss.415-421

Effect of Reinforcement Content on Corrosion Behaviors of Al-Cu/TiCp MMCs Fabricated by Hot Pressing

MALAYSIAN METALLURGY CONFERENCE 2010 & 4th MALAYSIAN POWDER METALLURGY SYMPOSIUM, Penang, Malezya, 24 - 28 Haziran 2010, ss.15-16

Effect of Reinforcement Content on Corrosion Behaviors of Al-Cu/TiCp MMCs Fabricated by Hot Pressing

MALAYSIAN METALLURGY CONFERENCE 2010 & 4th MALAYSIAN POWDER METALLURGY SYMPOSIUM, Penang, Malezya, 24 - 28 Haziran 2010, ss.15-16

Çelik yüzeylerdeki boya altı korozyonuna karşı çevre dostu iletken polipirol kaplamalar

Black Sea International Environmental Symposium., Giresun, Türkiye, 25 - 29 Ağustos 2008, ss.562-574

Çelik yüzeylerdeki boya altı korozyonuna karşı çevre dostu iletken polipirol kaplamalar

Black Sea International Environmental Symposium., Giresun, Türkiye, 25 - 29 Ağustos 2008, ss.562-574

Corrosion behavior of in-situ Al2O3 formed composite coating by DC plasma spraying

ITSC 2008: INTERNATIONAL THERMAL SPRAY CONFERENCE & EXPOSITION, Maastricht, Hollanda, 24 - 28 Haziran 2008, ss.1480-1484

Corrosion behavior of in-situ Al2O3 formed composite coating by DC plasma spraying

ITSC 2008: INTERNATIONAL THERMAL SPRAY CONFERENCE & EXPOSITION, Maastricht, Hollanda, 24 - 28 Haziran 2008, ss.1480-1484

%40 TiC ve SiC partikül katkili metal matrisli kompozitlerin potansiyodinamik ve EIS analizleri

MATIT 2007: IX. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Türkiye, 24 - 25 Kasım 2007, ss.135-142

The Effect of Cold-Worked Ratio on Corrosion Behavior of T8 Tempered Al¦Si¦Mg/SiCp Metal Matrix Composites

ICCM 16: 16th International Conference on Composite Materials, Adana, Türkiye, 1 - 04 Kasım 2007, ss.321-328

The Effect of Cold-Worked Ratio on Corrosion Behavior of T8 Tempered Al¦Si¦Mg/SiCp Metal Matrix Composites

ICCM 16: 16th International Conference on Composite Materials, Adana, Türkiye, 1 - 04 Kasım 2007, ss.321-328

The effect of T8 treatment on corrosion behavior of Al-SiCp MMCs

16th International Conferences on Composite Materials (ICCM16), Kyoto, Japonya, 8 - 13 Haziran 2007, ss.3-4

The effect of T8 treatment on corrosion behavior of Al-SiCp MMCs

16th International Conferences on Composite Materials (ICCM16), Kyoto, Japonya, 8 - 13 Haziran 2007, ss.3-4

The Influence of Boron Carbide (B4C) Reinforcement on the pitting behaviour of aluminium

X. International Corrosion Symposium, Adana, Türkiye, 1 - 04 Kasım 2006, ss.207-214

The Influence of Boron Carbide (B4C) Reinforcement on the pitting behaviour of aluminium

X. International Corrosion Symposium, Adana, Türkiye, 1 - 04 Kasım 2006, ss.207-214

Al-5Cu/50 TiC metal matrisli kompozitin korozyon duyarliligi

5th GAP ENGINEERING CONGRESS, Şanlıurfa, Türkiye, 26 - 28 Nisan 2006, cilt.1, ss.148-154

Al-5Cu/50 TiC metal matrisli kompozitin korozyon duyarliligi

5th GAP ENGINEERING CONGRESS, Şanlıurfa, Türkiye, 26 - 28 Nisan 2006, cilt.1, ss.148-154

Is makinelerinde gurultu problemi, cevreye etkisi ve kontrolü

II.IS MAKINELERI SEMPOZYUMU VE SERGISI, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2005, ss.389-400

Is makinelerinde gurultu problemi, cevreye etkisi ve kontrolü

II.IS MAKINELERI SEMPOZYUMU VE SERGISI, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2005, ss.389-400

Toz alti kaynagiyla birlestirilen yer alti tasima borularinin kaynak bölgesinin korozyonu

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Türkiye, 16 - 17 Eylül 2005, ss.277-286

Toz alti kaynagiyla birlestirilen yer alti tasima borularinin kaynak bölgesinin korozyonu

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Türkiye, 16 - 17 Eylül 2005, ss.277-286

Al/SiCp kompozitlerde görülen porozite tipleri ve geçirdikleri korozyon mekanizmalari

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Türkiye, 16 - 17 Eylül 2005, ss.259-267

Al/SiCp kompozitlerde görülen porozite tipleri ve geçirdikleri korozyon mekanizmalari

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Türkiye, 16 - 17 Eylül 2005, ss.259-267

Çevrenin is makinalarinin yürüyüs takimlari üzerindeki korozyon etkisine genel bir bakis

Is Makineleri Sempozyumu ve Sergisi, İstanbul, Türkiye, 6 - 07 Eylül 2003, ss.47-56

Çevrenin is makinalarinin yürüyüs takimlari üzerindeki korozyon etkisine genel bir bakis

Is Makineleri Sempozyumu ve Sergisi, İstanbul, Türkiye, 6 - 07 Eylül 2003, ss.47-56

TiN seramik filmlerin yapısal ve oksidasyon özellikleri

Makina-İmalat Teknolojileri Sempozyumu, Konya, Türkiye, 19 - 21 Ekim 1999, ss.118-124

Kitap & Kitap Bölümleri

İş Makinaları

Makine ve Teçhizat, Kadir Bilen, Editör, ATAAÖF, Erzurum, ss.1-24, 2017

Taşıma Tekniği

Makine Teçhizat, Kadir Bilen, Editör, ATAAOF, Erzurum, ss.1-22, 2017

Metrikler

Yayın

131

Atıf (WoS)

376

H-İndeks (WoS)

12

Atıf (Scopus)

483

H-İndeks (Scopus)

12

Proje

9

Tez Danışmanlığı

3

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları