Removal Kinetics of Olive-Mill Wastewater in a Batch-Operated Aerobic Bioreactor


Kul S., NUHOĞLU A.

JOURNAL OF ENVIRONMENTAL ENGINEERING, cilt.146, sa.3, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 146 Sayı: 3
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1061/(asce)ee.1943-7870.0001654
  • Dergi Adı: JOURNAL OF ENVIRONMENTAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, Aerospace Database, Agricultural & Environmental Science Database, Applied Science & Technology Source, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), Biotechnology Research Abstracts, Business Source Elite, Business Source Premier, CAB Abstracts, Chimica, Communication Abstracts, Compendex, Computer & Applied Sciences, Environment Index, Geobase, Greenfile, INSPEC, Metadex, Pollution Abstracts, Veterinary Science Database, DIALNET, Civil Engineering Abstracts
  • Atatürk Üniversitesi Adresli: Evet

Özet

This study involves the removal of the olive-mill wastewater (OMW), which is a significant pollutant, in a batch reactor under aerobic conditions by mixed cultures. It also includes comparison of different substrate inhibition models, calculation of kinetic parameters, and testing the merit of the chosen mathematical model with respect to OMW concentration and changes with time. Average initial microorganism concentration (X0) in the batch reactor was 100 +/- 15 mg L-1. During the study the treatment of OMW with initial chemical oxygen demand (S0) concentration between 10 and 1,000 mg COD L-1 was investigated. Maximum specific growth rate (mu max) was reached with 130 mg COD L-1 initial concentration and 3 h experimental duration produced 57.17% chemical oxygen demand (COD) removal efficiency. Other experiments with increasing initial concentration increased COD removal duration, with 927 mg COD L-1 initial concentration regressing to 8.88% removal efficiency after 3 h. The biokinetic equations of Aiba, Haldane, Tseng, and Yano and Koga were chosen to relate S0 concentration to specific growth rate (mu) and the biokinetic parameters in these equations were calculated. The most appropriate biokinetic equation was the Haldane model in terms of R2 value and the Haldane equation parameters 0.43 h-1, 45.34 mg L-1, and 207.97 mg L-1 were calculated for mu max, half-saturation constant (Ks) and inhibition constant (Ki), respectively. Also, a mathematical biokinetic model including the Haldane equation was used to test the OMW removal performance and it was seen that the chosen model was well able to reflect system behavior. After the calibration of mu max, the most-sensitive parameter of the Haldane model, to 0.22 h-1, the model gave a better fit for all tested conditions.