Cold flow properties of biodiesel obtained from corn oil


RASIMOGLU N., TEMÜR H.

ENERGY, cilt.68, ss.57-60, 2014 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 68
  • Basım Tarihi: 2014
  • Doi Numarası: 10.1016/j.energy.2014.02.048
  • Dergi Adı: ENERGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.57-60
  • Anahtar Kelimeler: Biodiesel, Cold flow properties, Cold filter plugging point, Cloud point, Pour point, TEMPERATURE, FEEDSTOCKS
  • Atatürk Üniversitesi Adresli: Evet

Özet

In this study, it is aimed to investigate the effects of parameters of transesterification on the cold flow properties of corn oil based biodiesel such as cloud point, pour point and cold filter plugging point. Reaction parameters examined were the transesterification temperature (in the range of 20-60 degrees C), reaction time (10-60 min), alcohol-to-oil ratio (3.15:1-12.85:1 in moles), amount of catalyst (0.25 2 g(catalyst)/100 mL corn oil) and stirring speed (300-800 rpm). As a result, it has been observed that when the transesterification reaction period is kept longer than 10 min, there were no changes in cold flow properties of the biodiesel obtained. In addition, better cold flow properties were monitored when alcohol-to-oil ratio was kept between 3.15:1 and 4.15:1. While no effect of reaction temperature on cold flow properties was observed above 20 degrees C, amount of basic catalyst used in the experiments gave the lowest cold flow properties at the percent of 0.75. Stirring speed has been ineffective in terms of cold flow properties in the transesterification process. (C) 2014 Elsevier Ltd. All rights reserved.