Effect of thermo-cycling on microhardness of CAD-CAM provisional materials


Creative Commons License

BAŞAK S. S., ÖZMEN M. F., SAĞSÖZ Ö., BAYINDIR F.

International Journal of Applied Dental Sciences, cilt.6, sa.4, ss.254-257, 2020 (Hakemli Dergi)

Özet

Özet

Amaç: Geçici restorasyonlar, son restorasyon yapılana kadar geçen sürede sabit protez tedavisinin önemli bir aşamasıdır ve günümüzde kullanılan CAD-CAM teknolojisi ile en uygun geçici malzeme araştırılmalıdır. Bu çalışmanın amacı, termal-siklusun CAD-CAM geçici protez malzemelerin mikro sertliği üzerindeki etkisini araştırmaktır.

Gereç ve yöntemler: CAD-CAM sistemleri için üretilen üç tip geçici restoratif malzeme incelenmiştir: Vita CAD Temp (Vita Zahnfabrik, Almanya), Telio CAD (Ivoclar Vivadent, Liechtenstein) ve Ceramill Temp (Amann Girrbach, Avusturya). 2 mm kalınlığında ve 10 mm çapında toplam otuz disk numunesi üretildi (n = 10). Vickers sertliği 10 saniye boyunca 10 g'lık bir yük altında ölçüldü. Tüm numune grupları 5000 termal döngüye tabi tutulmuş ve sertlik ölçümleri tekrarlanmıştır. İstatistiksel analiz için tek yönlü ANOVA ve post hoc Tukey testi kullanıldı.

Bulgular: CAD-CAM geçici malzemelerin sertlik değerleri (HV) ısıl döngüden sonra düştü, ancak istatistiksel olarak anlamlı değildi (p> 0.05).

Sonuç: Termal-siklus, test edilen CAD-CAM geçici malzemelerin sertliğini etkiler. Termal-siklüs, CAD Temp ve Ceramill Temp için mikro sertlik değerlerinin azaltılmasıyla doğrudan ilgiliydi. Bu bulgular, ağızdaki termal değişiklikleri önlemek için uzun süre geçici restorasyonlar kullanmak zorunda kalan hastalara tavsiyelerde bulunmaları için klinisyenleri destekleyebilir.

Abstract

Purpose: Temporary restorations are an important stage of fixed prosthetic treatment in the period until the final restoration is made and the most appropriate provisional material with CAD-CAM technology used today should be researched. The aim of this study was to investigate the effect of thermo-cycling on micro hardness of CAD-CAM Provisional materials.

Materials and methods: Three types of provisional restorative materials produced for CAD-CAM systems were examined: Vita CAD Temp (Vita Zahnfabrik, Germany), Telio CAD (Ivoclar Vivadent, Liechtenstein) and Ceramill Temp (Amann Girrbach, Austria). A total of thirty disc specimens with 2 mm thick and 10 mm diameter were produced (n=10). Vickers hardness was measured under a load of 10g for 10s. All specimen groups were subjected to 5000 thermo cycles and hardness measurements repeated. One-way ANOVA and post hoc Tukey’s test were used for statistical analysis.

Results: Hardness values (HV) of CAD-CAM provisional materials decreased after thermo-cycling, however, it was not statistically significant (p>0.05).

Conclusion: Thermo-cycling affects the hardness of CAD-CAM provisional materials tested. Thermocycling was directly related to the reduction of microhardness values for the CAD Temp and Ceramill Temp. These findings may support clinicians to advice patients who have to use temporary restorations for a long time to avoid thermal changes in the mouth.