Comparison of textile dyeing effluent adsorption on commercial activated carbon and activated carbon prepared from olive stone by ZnCl2 activation


Ugurlu M., GÜRSES A., ACIKYILDIZ M.

MICROPOROUS AND MESOPOROUS MATERIALS, cilt.111, ss.228-235, 2008 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 111
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.micromeso.2007.07.034
  • Dergi Adı: MICROPOROUS AND MESOPOROUS MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.228-235
  • Anahtar Kelimeler: adsorption, chemical activation, olive stone, kinetic equations, textile dyeing effluent, AQUEOUS-SOLUTIONS, CONGO RED, ACID DYES, REMOVAL, CADMIUM, WASTE, DECOLORIZATION, RESIDUES, BAGASSE, HUSKS
  • Atatürk Üniversitesi Adresli: Evet

Özet

Adsorption of Remazol Red B on activated carbon prepared from olive stone and commercial activated carbon from aqueous solutions was compared. Different activating agent (ZnCl2) amounts and adsorbent particle size were studied to optimize adsorbent surface area. The adsorptive property of commercial activated carbon and activated carbon prepared from olive stone were investigated in terms of adsorbent dose, temperature, equilibrium time and pH. Then the obtained results were compared for all parameters, According to the results, the equilibrium time, optimum pH, adsorbent dosage were found 60 min, pH < 3-4 and 1.0 g/50 ml respectively. Lower adsorption capacity for RRB on activated carbon prepared from olive stone was found. The kinetic data for both adsorbents supports pseudo-second order model (r(2) > 0.99) and intra-particle model (r(2) > 0.95) but the first order kinetic model did not adequately fit to the experimental values (r(2) < 0.76). The equilibrium adsorption data were interpreted using Langmuir and Freundlich models. The adsorption of Remazol Red B was better represented by the Langmuir equation. In addition, the thermodynamic parameters, standard free energy (Delta G degrees), standard enthalpy (Delta H degrees), standard entropy (Delta S degrees) of the adsorption process were calculated for both adsorbents. To reveal the adsorptive characteristics of the produced active carbon, surface area measurements were carried out and structural analysis was performed using SEM-EDS. (C) 2007 Elsevier Inc. All rights reserved.