Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings

SICAK PRESLEME YÖNTEMİ İLE ÜRETİLMİŞ AZ91/TiNi KOMPOZİTLERİNİN MİKROYAPISI

1st INTERNATIONAL SYMPOSIUM ON LIGTH ALLOYS AND COMPOSİTE MATERIALS (ISLAC’xx18), Karabük, Turkey, 22 - 24 March 2018, pp.290-291

TiNi İLE TAKVİYE EDİLMİŞ Mg MATRİSLİ KOMPOZİTLERİN SICAK PRESLEME YÖNTEMİ İLE ÜRETİLMESİ

1st INTERNATIONAL SYMPOSIUM ON LIGTH ALLOYS AND COMPOSİTE MATERIALS (ISLAC’xx18), 22 - 24 March 2018, pp.288-289

Production of Aluminum Composites Containing TiB2 and Al2O3 Particles

4th International Conference on Natural and Engineering Science, Muğla, Turkey, 9 - 12 October 2018, pp.44

Mg/NiTi METAL MATRİSLİ KOMPOZİTLERİN KOROZYON DUYARLILIKLARI

15th INTERNATIONAL CORROSION SYMPOSIUM (KORSEM’xx18), 26 - 28 September 2018

Mg/NiTi metal matrisli kompozitlerin korozyon duyarlılıkları

XVth International Corrosion Symposium, Hatay, Turkey, 26 - 28 September 2018, pp.19

Mg/NiTi metal matrisli kompozitlerin korozyon duyarlılıkları

XVth International Corrosion Symposium, Hatay, Turkey, 26 - 28 September 2018, pp.19

TiNi İLE TAKVİYE EDİLMİŞ MAGNEZYUM MATRİSLİ KOMPOZİTLERİN YÜKSEK SICAKLIK MEKANİK ÖZELLİKLERİ

3. INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND TECHNOLOGY IN CAPPADOCIA (IMSTEC 2018), 17 - 19 September 2018

TOZ METALÜRJİSİ YÖNTEMİ İLE ÜRETİLMİŞ TiNi/AZ91D KOMPOZİTLERİNİN ODA SICAKLIĞI VE YÜKSEK SICAKLIK MUKAVEMETLERİ

3. INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND TECHNOLOGY IN CAPPADOCIA (IMSTEC 2018), 17 - 19 September 2018

Renewed Furnace Design for Increasing Heating Rate in Aluminum Matrix Composite Production

International Symposium on Innovative Approaches in Scientific Studie, Antalya, Turkey, 11 - 13 April 2018, pp.189

Effect of Cooling Rate Applied to Aluminum Composites on Hardness and Wear Resistance

International Symposium on Innovative Approaches in Scientific Studies, Antalya, Turkey, 11 - 13 April 2018, pp.475

A Review on The Hydrogels Used in 3D Bioprinting

3rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018, pp.135-138

TiNi ŞEKİL BELLEKLİ ALAŞIMLARLA TAKVİYE EDİLMİŞ MAGNEZYUM BAZLI KOMPOZİTLERDE FAZ DÖNÜŞÜMLERİ

THE INTERNATİNONAL CONFERENCE ON MATERİALS SCİENCE, MECHANİCAL AND AUTOMOTİVE ENGİNEERİNGS AND TECHNOLOGY IN ÇEŞME/İZMİR (IMSMATEC’18), 10 - 12 April 2018

Alüminyum Kompozit Malzemelerin Otomobil Parçalarında Kullanımı

International Vocational Science Symposium, Antalya, Turkey, 18 - 20 October 2017, pp.105

Determination of Epoxy Resin’s Mechanical Properties Reinforced with Nanofibers Obtained from PVP Polymer by Electrospinning Method

II. International Conference on Advanced Engineering Technologies - ICADET 2017, Bayburt, Turkey, 21 - 23 September 2017, pp.1442

The effect of corrosion on the microstructure of the Al-5Cu matrix composites reinforced with TiC particles

European Congress and Exhibition on Advanced Materials and Processes (EUROMAT2017), Thessaloniki, Greece, 17 - 22 September 2017

Production of Aluminum Metal Matrix Composites with Al2O3 and TiC

3rd INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2016), Antalya, Turkey, 19 - 24 October 2016, pp.478

Production of Aluminum Metal Matrix Composites with Al2O3 and TiC

3rd INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2016), Antalya, Turkey, 19 - 24 October 2016, pp.478

Synthesis of and Al2O3 and TiB2 Ceramic Particles in Aluminum Matrix

International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), Antalya, Turkey, 19 - 24 October 2016, pp.462

MAGNEZYUM VE ALAŞIMLARININ YÜKSEK SICAKLIK DAYANIMLARINI GELİŞTİRMEDEŞEKİL BELLEKLİ MALZEMELERİN KULLANIMI

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016, Nevşehir, Turkey, 6 - 08 April 2016, pp.538-543

IN SITU ALÜMİNYUM MATRİSLİ KOMPOZİTLERİN FARKLIPARAMETRELERLE ÜRETİMİ

International Conference on Material Science and Technology in Cappadocia (IMSTEC’16), Nevşehir, Turkey, 6 - 08 April 2016, pp.177-182

Production of Metal Matrix Composites by In situ Techniques

2nd Global Conference on Materials Sciences, Nicosia, 15 - 17 October 2015

Deney Parametrelerinin Alüminyum Metal Matrisli Kompozitlerin Üretimi Üzerine Etkileri

IMCOFE’15 : International Multidisciplinary Congree of Eurasia, ÜSKÜP, 1 - 05 September 2015, pp.256-261

Production, characterization, and mechanical behavior of Al based metal matrix composites incorporating TiC particles

17th International Conference on the Strength of Materials (ICSMA-17), Brno, Czech Republic, 9 - 14 August 2015, pp.43

Production characterization and mechanical behavior of Al based metal matrix composites incorporating TiC particles

17th International Conference on the Strength of Materials (ICSMA-17), Brno, Czech Republic, 9 - 14 August 2015

The effect of sintering time on the corrosion behavior of in-situ Al-Cu/Al2O3 nanocomposites

The 10th National Conference on Nanoscience and Nanotechnology (NanoTR-10), İstanbul, Turkey, 17 - 21 June 2014, pp.43

The effect of sintering time on the corrosion behavior of in-situ Al-Cu/Al2O3 nanocomposites

The 10th National Conference on Nanoscience and Nanotechnology (NanoTR-10), İstanbul, Turkey, 17 - 21 June 2014, pp.43

What Are the Harmful Effects of Corrosion?

International Environmental Sciences Symposium of Van (IESSV14), Van, Turkey, 4 - 07 June 2014, pp.43

What Are the Harmful Effects of Corrosion?

International Environmental Sciences Symposium of Van (IESSV14), Van, Turkey, 4 - 07 June 2014, pp.43

Corrosion susceptibilities of under and over aged Al/TiC three-layered composites produced by hot-pressing

5th Powder Metallurgy Symposium & Exhibition, Kuala Lumpur, Malaysia, 9 - 10 August 2011, pp.43

Corrosion susceptibilities of under and over aged Al/TiC three-layered composites produced by hot-pressing

5th Powder Metallurgy Symposium & Exhibition, Kuala Lumpur, Malaysia, 9 - 10 August 2011, pp.43

Biyoseramik Kaplamanin AA6061-T4 Alasiminda Korozyon Direncine Etkisi

IATS’11: INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM, Elazığ, Turkey, 24 - 26 June 2011, pp.415-421

Biyoseramik Kaplamanin AA6061-T4 Alasiminda Korozyon Direncine Etkisi

IATS’11: INTERNATIONAL ADVANCED TECHNOLOGIES SYMPOSIUM, Elazığ, Turkey, 24 - 26 June 2011, pp.415-421

Effect of Reinforcement Content on Corrosion Behaviors of Al-Cu/TiCp MMCs Fabricated by Hot Pressing

MALAYSIAN METALLURGY CONFERENCE 2010 & 4th MALAYSIAN POWDER METALLURGY SYMPOSIUM, Penang, Malaysia, 24 - 28 June 2010, pp.15-16

Effect of Reinforcement Content on Corrosion Behaviors of Al-Cu/TiCp MMCs Fabricated by Hot Pressing

MALAYSIAN METALLURGY CONFERENCE 2010 & 4th MALAYSIAN POWDER METALLURGY SYMPOSIUM, Penang, Malaysia, 24 - 28 June 2010, pp.15-16

Çelik yüzeylerdeki boya altı korozyonuna karşı çevre dostu iletken polipirol kaplamalar

Black Sea International Environmental Symposium., Giresun, Turkey, 25 - 29 August 2008, pp.562-574

Çelik yüzeylerdeki boya altı korozyonuna karşı çevre dostu iletken polipirol kaplamalar

Black Sea International Environmental Symposium., Giresun, Turkey, 25 - 29 August 2008, pp.562-574

Corrosion behavior of in-situ Al2O3 formed composite coating by DC plasma spraying

ITSC 2008: INTERNATIONAL THERMAL SPRAY CONFERENCE & EXPOSITION, Maastricht, Netherlands, 24 - 28 June 2008, pp.1480-1484

Corrosion behavior of in-situ Al2O3 formed composite coating by DC plasma spraying

ITSC 2008: INTERNATIONAL THERMAL SPRAY CONFERENCE & EXPOSITION, Maastricht, Netherlands, 24 - 28 June 2008, pp.1480-1484

%40 TiC ve SiC partikül katkili metal matrisli kompozitlerin potansiyodinamik ve EIS analizleri

MATIT 2007: IX. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Turkey, 24 - 25 November 2007, pp.135-142

The Effect of Cold-Worked Ratio on Corrosion Behavior of T8 Tempered Al¦Si¦Mg/SiCp Metal Matrix Composites

ICCM 16: 16th International Conference on Composite Materials, Adana, Turkey, 1 - 04 November 2007, pp.321-328

The Effect of Cold-Worked Ratio on Corrosion Behavior of T8 Tempered Al¦Si¦Mg/SiCp Metal Matrix Composites

ICCM 16: 16th International Conference on Composite Materials, Adana, Turkey, 1 - 04 November 2007, pp.321-328

The effect of T8 treatment on corrosion behavior of Al-SiCp MMCs

16th International Conferences on Composite Materials (ICCM16), Kyoto, Japan, 8 - 13 June 2007, pp.3-4

The effect of T8 treatment on corrosion behavior of Al-SiCp MMCs

16th International Conferences on Composite Materials (ICCM16), Kyoto, Japan, 8 - 13 June 2007, pp.3-4

The Influence of Boron Carbide (B4C) Reinforcement on the pitting behaviour of aluminium

X. International Corrosion Symposium, Adana, Turkey, 1 - 04 November 2006, pp.207-214

The Influence of Boron Carbide (B4C) Reinforcement on the pitting behaviour of aluminium

X. International Corrosion Symposium, Adana, Turkey, 1 - 04 November 2006, pp.207-214

Al-5Cu/50 TiC metal matrisli kompozitin korozyon duyarliligi

5th GAP ENGINEERING CONGRESS, Şanlıurfa, Turkey, 26 - 28 April 2006, vol.1, pp.148-154

Al-5Cu/50 TiC metal matrisli kompozitin korozyon duyarliligi

5th GAP ENGINEERING CONGRESS, Şanlıurfa, Turkey, 26 - 28 April 2006, vol.1, pp.148-154

Is makinelerinde gurultu problemi, cevreye etkisi ve kontrolü

II.IS MAKINELERI SEMPOZYUMU VE SERGISI, İstanbul, Turkey, 29 September - 01 October 2005, pp.389-400

Is makinelerinde gurultu problemi, cevreye etkisi ve kontrolü

II.IS MAKINELERI SEMPOZYUMU VE SERGISI, İstanbul, Turkey, 29 September - 01 October 2005, pp.389-400

Toz alti kaynagiyla birlestirilen yer alti tasima borularinin kaynak bölgesinin korozyonu

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, pp.277-286

Toz alti kaynagiyla birlestirilen yer alti tasima borularinin kaynak bölgesinin korozyonu

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, pp.277-286

Al/SiCp kompozitlerde görülen porozite tipleri ve geçirdikleri korozyon mekanizmalari

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, pp.259-267

Al/SiCp kompozitlerde görülen porozite tipleri ve geçirdikleri korozyon mekanizmalari

MATIT 2005: III. Makine Tasarim ve Imalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, pp.259-267

Çevrenin is makinalarinin yürüyüs takimlari üzerindeki korozyon etkisine genel bir bakis

Is Makineleri Sempozyumu ve Sergisi, İstanbul, Turkey, 6 - 07 September 2003, pp.47-56

Çevrenin is makinalarinin yürüyüs takimlari üzerindeki korozyon etkisine genel bir bakis

Is Makineleri Sempozyumu ve Sergisi, İstanbul, Turkey, 6 - 07 September 2003, pp.47-56

TiN seramik filmlerin yapısal ve oksidasyon özellikleri

Makina-İmalat Teknolojileri Sempozyumu, Konya, Turkey, 19 - 21 October 1999, pp.118-124

Books & Book Chapters

İş Makinaları

in: Makine ve Teçhizat, Kadir Bilen, Editor, ATAAÖF, Erzurum, pp.1-24, 2017

Taşıma Tekniği

in: Makine Teçhizat, Kadir Bilen, Editor, ATAAOF, Erzurum, pp.1-22, 2017

Metrics

Publication

131

Citation (WoS)

422

H-Index (WoS)

14

Citation (Scopus)

537

H-Index (Scopus)

14

Citation (Scholar)

279

H-Index (Scholar)

10

Project

9

Thesis Advisory

3

Open Access

1
UN Sustainable Development Goals