Determination of transmission factors of concretes with different water/cement ratio, curing condition, and dosage of cement and air entraining agent


ŞAHİN R., POLAT R., İÇELLİ O., ÇELİK C.

ANNALS OF NUCLEAR ENERGY, cilt.38, sa.7, ss.1505-1511, 2011 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 38 Sayı: 7
  • Basım Tarihi: 2011
  • Doi Numarası: 10.1016/j.anucene.2011.03.013
  • Dergi Adı: ANNALS OF NUCLEAR ENERGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1505-1511
  • Anahtar Kelimeler: Concrete, Transmission factor, Radiation, Taguchi Method, LINE QUALITY-CONTROL, ATTENUATION COEFFICIENTS, RADIATION TRANSMISSION, GAMMA-RAYS, COLEMANITE, SHIELDS, DESIGN, WASTE
  • Atatürk Üniversitesi Adresli: Evet

Özet

This study focuses on determination of transmission factors of main parameters affecting the properties of both normal- and heavy-weight concrete in order to increase knowledge and understanding of radiation attenuation in concrete at a later age. Water/cement (W/C) ratio, curing condition, cement quantity and air entraining agent (AEA) were selected as the main parameters. Eight energy values have been selected within the energy interval of 30.85-383.85 keV to be used in the radiation source. The Taguchi Method was used as the method of optimization. It was determined in the study that the most important parameter affecting the attenuation of the radiation of the concrete is the W/C ratio and the concretes produced with the lowest level of W/C ratio absorb more radiation. However, it was also determined that there was a combined effect between the W/C ratio and the cement dosage. (C) 2011 Elsevier Ltd. All rights reserved.