Boron removal from geothermal waters by electrocoagulation

YILMAZ A. B., Boncukcuoglu R., Kocakerim M. M., YILMAZ M. T., Paluluoglu C.

JOURNAL OF HAZARDOUS MATERIALS, cilt.153, ss.146-151, 2008 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 153
  • Basım Tarihi: 2008
  • Doi Numarası: 10.1016/j.jhazmat.2007.08.030
  • Dergi Adı: JOURNAL OF HAZARDOUS MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.146-151
  • Anahtar Kelimeler: boron, electrocoagulation, geothermal water, aluminum electrode, WASTE-WATER, PHOSPHATE REMOVAL, DECOLORIZATION, FLUORIDE
  • Atatürk Üniversitesi Adresli: Evet

Özet

Most of the geothermal waters in Turkey contain extremely high concentration of boron when they are used for irrigation. The use of geothermal waters for irrigation can results in excess amount deposition of boron in soil. On the other hand, a minimal boron concentration is required for irrigational waters. In this study, electrocoagulation (EC) was selected as a treatment process for the removal of boron from thermal waters obtained from Ihca-Erzurum in Turkey. Current density (CD), pH of solution and temperature of solution were selected as operational parameters. The results showed that boron removal efficiency increased from pH 4.0 to 8.0 and decreased at pH 10.0. Although boron removal efficiency was highest at pH 8.0, energy consumption was very high at this pH value compared to other pH intervals. Boron removal efficiency reached to 95% with increasing current density from 1.5 to 6.0 mA/cm(2), but energy consumption was also increased in this interval. At higher temperatures of solution, such as 313 and 333 K, boron removal efficiency increased. At optimum conditions, boron removal efficiency in geothermal water reached up to 95%. (c) 2007 Elsevier B.V. All rights reserved.