Impact of Chitosan as a Binder in Graphene Gas Sensor for Volatile Organic Compound Detection


Chachuli S. A. M., Muhammad ‘Azmi N. A., Shamsudin N., ÇOBAN Ö., Aziz S. A. C.

ChemistrySelect, cilt.10, sa.4, 2025 (SCI-Expanded) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 10 Sayı: 4
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1002/slct.202405111
  • Dergi Adı: ChemistrySelect
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier
  • Anahtar Kelimeler: Acetone, Chitosan polymer, Doctor blade, Ethanol, Screen-printing, Thick film gas sensor
  • Atatürk Üniversitesi Adresli: Evet

Özet

Exposure to high amounts of volatile organic compounds (VOC) in the short term can cause headaches, dizziness, worsening asthma symptoms, vomiting, and eye, nose, and throat irritation. Thus, a gas sensor is needed to detect VOC gases. Chitosan as a nonconducting polymer was used as an alternative binder for thick film gas sensors in this study. Chitosan was dissolved in an acetic acid to produce a polymer solution and mixed with graphene nanoflakes to make a graphene gas sensor. Two chitosan binder recipes were used in this study to investigate their performance in gas sensors for the VOCs acetone and ethanol. A single layer and a double layer of graphene were deposited to study their effects on VOC sensing. Single and double layers of graphene gas sensors had little effect on the sensing response to acetone and ethanol vapor. Results revealed that the gas sensors were prepared by binder B responded better than binder A in sensing response to acetone and ethanol with a response value achieved by T2-2-S1(3) and, T2-2-S1(1) with a response value of 1.0579 and, 1.0532, respectively. In addition, chitosan in graphene gas sensors had outstanding performances, in terms of linearity and repeatability characteristics.