Akademik Veri Yönetim Sistemi
CONTEMPORARY CLINICAL DENTISTRY, cilt.10, sa.2, ss.239-242, 2019 (ESCI)
Background: Routine laboratory procedures and repeated glazed effect the final color of metal-ceramic restorations (MCRs). Clinicians wonder if the color changes after routine laboratory procedures and repeated glazed is clinically acceptable or not. Aims: The aim of this study was to determine the color changes of MCRs after routine laboratory procedures and then glazed for 1, 2, and 3 times. Materials and Methods: Forty-five disc-shaped (10-mm diameter and 1-mm thickness) specimens were fabricated from Cr-Co metal-alloy. Bonding agent, first and second layer of shade A(2)opaque porcelain (OP) were applied on the metal specimens. The color of specimens was measured with a spectrophotometer after each procedure and Delta E-1, Delta E-2,and Delta E-3 values were calculated. Shade A(2) feldspathic porcelain was applied (2-mm thickness) to all specimens. Glaze was applied on the porcelain for 1, 2, and 3 times and then, the color measured after each procedure and Delta E-4, Delta E-5, and Delta E-6 values were calculated. Data were analyzed with one-way ANOVA and Duncan test (P < 0.05). Results: Delta E-1 that was obtained between the first layer of OP and bonding agent showed the greatest value. Delta E-2 that was obtained between the second and first layer of OP showed the lowest value. After repeated glazed procedures, the final color of the specimens was changed; but, these changes were clinically acceptable (Delta E < 5.5). Conclusions: The routine laboratory procedures and glazed for 1,2, and 3 times is effect the color of MCRs; but, the color changes were clinically acceptable (Delta E < 5.5).