Akademik Veri Yönetim Sistemi
IRANIAN JOURNAL OF PHARMACEUTICAL RESEARCH, cilt.15, ss.65-73, 2016 (SCI-Expanded)
Isoniazid (INH) was studied with regard to its electrochemical treatment on a strongly alkaline solution of a poly (3,4-ethylenedioxythiophene)-modified gold electrode, using both cyclic voltammetric and controlled potential techniques. Electrocatalytic performance measurements of this composite electrode toward oxidation of INH exhibited an increase of 4-folds in oxidation peak densities compared to the bare gold electrode. Central composite design method was used to obtain optimum experimental conditions, and used critical parameters (pH (A), scan rate (mV/s, B) and temperature (degrees C, C) to assess the effects on amperometric response. Optimum experimental conditions were achieved by using a pH of 9.2 with a scan rate of 260 mV/s and a temperature of 30 degrees C. Under these circumstances, a good linear relationship was observed between peak current densities and INH concentration in the range of 0.05-2 mu M, with correlation coefficient of 0.9998. Furthermore, the method was very sensitive (limit of quantitation, 0.0043 mu M), accurate (relative error, -5.65 to 4.03) and precise (relative standard deviation %, <= 7.97). The method was also applied to determine INH in pharmaceutical formulations, and statistically compared the results with the official method using the two one-sided equivalence test; the results were in good agreement with those obtained by the official and reported methods.