A wideband noise cancelling balun LNA employing current reuse technique
Microelectronics Journal, cilt.76, ss.1-7, 2018 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 76
- Basım Tarihi: 2018
- Doi Numarası: 10.1016/j.mejo.2018.04.006
- Dergi Adı: Microelectronics Journal
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
- Sayfa Sayıları: ss.1-7
- Anahtar Kelimeler: Current reuse, Distortion cancelling, Inductorless, Low noise amplifier, Low power, Noise cancellation, Wideband
- Atatürk Üniversitesi Adresli: Hayır
Özet
A balun inductorless wideband low noise amplifier (LNA) with active loads is proposed for multi-standard radio applications. The noise cancelling and current reuse techniques are combined to mitigate the need for high power consumption in conventional balun LNAs. This adds a degree of freedom for transconductance of common gate stage (gmCG). As a result, lower gmCG without degrading the input matching, allows a large scaling factor for common source (CS) stage in noise cancelling technique. Post-layout simulation results of the proposed LNA circuit in a 180 nm RF CMOS process show voltage gain of 20.2 dB, −3 dB bandwidth from 600 MHz to 3.15 GHz. The minimum NF is 2.37 dB with input return loss (S11) better than −13 dB in all frequency range and third input intercept point (IIP3) is −2.1 dBm. The circuit dissipates 6 mW from 1.5 V DC supply with an active area of 0.026 mm2.