Response surface methodology for the design of malachite green dye removal by γ-Fe<sub>2</sub>O<sub>3</sub> dispersed on reduced graphene oxide sheets

Zhu L., Sana A., Qamar M. T., Bahadur A., Liu G., Aslam M., ...Daha Fazla

SCIENTIFIC REPORTS, cilt.15, sa.1, 2025 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 15 Sayı: 1
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1038/s41598-025-88072-7
  • Dergi Adı: SCIENTIFIC REPORTS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, BIOSIS, Chemical Abstracts Core, MEDLINE, Veterinary Science Database, Directory of Open Access Journals
  • Atatürk Üniversitesi Adresli: Evet

Özet

A nanocomposite composed of rGO and gamma-Fe2O3 was prepared using ultrasonication for the adsorption of malachite green (MG) dye. The preferential plane diffractions at 2 theta values of 35.54 degrees and 26.45 degrees about gamma-Fe2O3 (311) and rGO (002) with 19.85 and 20.92 nm crystallite sizes, respectively confirmed the successful formation of nanocomposite nature of the adsorbent. Moreover, XPS and FTIR results also confirmed the composite formation due to the existence of peaks relevant to the composite's components. The adsorbent's surface charge (pH(PZC) = similar to 7.1) was also estimated using the salt addition technique. To minimize experiments and optimize adsorption parameters for the removal of MG by the nanocomposite at 25 degrees C, central composite design (CCD) using response surface methodology (RSM) was used. The optimal adsorption parameters obtained from the within-range numerical optimization based on 0.923 Derringer's desirability function were 200 mg/100 mL dose, 80 ppm dye solution, 7.99 pH and 112.68 min. contact time for similar to 90% MG dye removal and 40.64 mg/g adsorption capacity (q(m)) by rGO/gamma-Fe2O3. However, similar to 98% MG dye removal with 64.26 mg/g (q(m)) was achieved upon extended-range estimation of adsorption parameters. The adsorption data exhibited the best co-relationship with Freundlich isotherm and pseudo-2nd order kinetic model. According to a thermodynamic analysis, the MG adsorption process on the rGO/gamma-Fe2O3 surface is exothermic, spontaneous, and less random. Moreover, the thermal stability, desorption, regeneration and reusability of rGO/gamma-Fe2O3 nanocomposite were also explored. Finally, this study shows that RSM can be an excellent technique to optimize the dye adsorption process at industrial scale.