Akademik Veri Yönetim Sistemi
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, cilt.9, sa.1, ss.195-207, 2022 (Hakemli Dergi)
Nowadays, direct current (DC) voltage is required for the operation of the machines used in many industrial applications. DC voltage generating photovoltaic (PV) panels or other DC voltage generators need to be converted from the voltage level produced by the DC voltage levels required for the operation of the machines. The conversion of a DC voltage to a different DC voltage is performed by DC-DC converters. The most commonly used DC-DC converters in the literature are buck, boost, buck-boost, CUK and SEPIC converter. In this study, different control methods are used in order to reach the desired voltage level of the output voltage of the equivalent series resistance and ideal SEPIC converter in continuous current mode. Conventional Proportional-Integral (PI) and Sliding Mode Control (SMC) methods are used to ensure that the converter reaches the desired voltage level. PI controller parameter values are calculated according to trial and error method. In order to compare the performances of the controller used in the case ideal and equivalent series resistance cases, the controller parameters are taken the same. SMC is shown to perform better in ideal and equivalent series resistance SEPIC converter compared to the traditional PI controller from simulation results. Besides, modeling and controller applications of SEPIC converter are realized by using MATLAB / SIMULINK program.