Effect of ceramic surface treatments on the bond strength of different composite resins


Yanıkoğlu N., Duymuş Z., Alkurt M.

Journal of Adhesion Science and Technology, cilt.32, sa.3, ss.247-257, 2018 (SCI-Expanded, Scopus)

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 32 Sayı: 3
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1080/01694243.2017.1354430
  • Dergi Adı: Journal of Adhesion Science and Technology
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.247-257
  • Anahtar Kelimeler: Sandblasting, silica coating, laser treatment, bond strength, composite resins, zirconia ceramic
  • Atatürk Üniversitesi Adresli: Evet

Özet

This study was aimed to observe the relationship between the different surface treatments and the bond strength of both composite based adhesive cement and zirconia ceramic. Thirty-two zirconia ceramic discs were fabricated by following the instructions of manufacturer (5 × 5 × 1.5 mm). Four subgroups were obtained from the specimens according to the specified surface treatments respectively: (a) C: control groups: no treatment; (b) SB: sandblasting with 125 μm aluminum oxide particles for 10 s; (c) SC: silica coating for 10 s; (d) Nd :YAG laser. The composite resin specimens Panavia F and Clearfil SA were introduced and polymerized to the treated bonding areas. Afterwards the specimens were stored in distilled water at 37 °C during 24 h, and the shear test was applied. The data were statistically analyzed by ANOVA and Duncan tests. The bond strength was stated significantly higher in silica coating/Panavia F group (23.35 MPa). The lowest bond strength was stated in control groups cemented with Clearfil SA (12.25 MPa). As a result it was determined that the bond strength has affected the both surface treatments and cement types (p < 0.001). The silica coating –treated zirconia ceramic recorded a significant increase in mean bond strength values.