Akademik Veri Yönetim Sistemi
POLYMER COMPOSITES, cilt.45, sa.9, ss.8163-8175, 2024 (SCI-Expanded)
The use of hybrid reinforcement in polymer composites has been getting attention due to its potential for weight and cost reduction while achieving improved design flexibility for mechanical and thermal properties. In this study, an interply hybridization of epoxy laminates was performed using layers of solid and hollow glass fibers. The structural and thermal performance of the resulting hybrid vascular composites was investigated. All composite parts were manufactured using vacuum-assisted resin transfer molding (VARTM), following an interply hybridization plan for the stacking sequence of hollow and solid fiber layers. An expected decrease in flexural properties and thermal conductivity was observed for the laminates with completely hollow fibers. On the other hand, hybridization had a positive effect on the laminate properties. It was shown that hybrid vascular composites could be manufactured without a significant reduction in mechanical and thermal performance by a judicious hybridization plan. The optimum hybridization of the laminate achieved a 3.1% increase in the specific flexural strength and a 5.3% decrease in thermal conductivity while containing a vascular network that can be used for active thermal control.Highlights A vascular interply composite structure consisting of hollow and solid fibers was manufactured and characterized for the first time. The I4 composite, vascularized through the middle layers of the laminate, has almost as much flexural strength as solid composite and much more specific flexural strength. The thermal conductivity of the I4 composite is almost as much as that of the solid composite. Functional composites for thermal management and smart applications can be manufactured using hollow fibers without sacrificing flexural strength and thermal conductivity with interply vascularization. Vascularization of laminated composites. image