Phosphate removal from water by fly ash: Factorial experimental design
JOURNAL OF HAZARDOUS MATERIALS, cilt.135, ss.165-170, 2006 (SCI-Expanded, Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 135
- Basım Tarihi: 2006
- Doi Numarası: 10.1016/j.jhazmat.2005.11.036
- Dergi Adı: JOURNAL OF HAZARDOUS MATERIALS
- Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
- Sayfa Sayıları: ss.165-170
- Anahtar Kelimeler: phosphate removal, fly ash, experimental design, factorial design, AQUEOUS-SOLUTIONS, HEAVY-METAL, SORPTION, ADSORPTION, COAL
- Atatürk Üniversitesi Adresli: Evet
Özet
The influence of three variables (phophate concentration, initial pH of solution (pH(0)) and the fly ash dosage) on the removal efficiency of phosphate (% E) and equilibrium pH of solution (pH(eq)) by using fly ash was studied by means of 2(3) full factorial experimental designs. The parameters coded as x(1), x(2) and X-3, consecutively. were used. The parameters were investigated at two levels (-1 and 1). The effects of these factors on dependent variables, namely. % E and pH,, were investigated. To determine the significance of effects. the analysis of variance with 95% confidence limits was used. It was shown that % E and pH,, obtained in this study were found to be 99.6% and 11.16, corresponding to the operating condition of 25 mg l(-1), 2 g l(-1) and 5.5 for the phosphate concentration. fly ash dosage and pH(0). respectively. (c) 2005 Elsevier B.V. All rights reserved.