Akademik Veri Yönetim Sistemi
PROGRESS IN NUCLEAR ENERGY, cilt.133, 2021 (SCI-Expanded)
In this study, four newly developed chromium ore based new heavy concretes containing different types of minerals (chromium ore, hematite (Fe2O3), titanium oxide (TiO2), limonite (FeO(OH)nH(2)O), and siderite (FeCO3) and compounds (galena (PbS), chromium oxide (Cr2O3) and manganese oxide (MnO2) were investigated for neutron and gamma shielding effectiveness. It was observed that the developed concretes have strength up to 30 MPa (4351.131 psi) using mechanical stress tests. In addition, temperature resistance tests were carried out and the results were found to be up to desired level. GEANT4 simulation was employed to determine the effective removal cross-section Sigma R (cm(-1)), transmission number mean free path (MFP), and half value layer (HVL) of the concretes. The equivalent dose rate of fast neutron was calculated using Am-Be source and BF3 proportional counter. Gamma-ray shielding properties mass attenuation coefficients, half-value layer, mean free path, and effective atomic number of the concretes were assessed in the energy range between 0.015 and 15 MeV. The obtained results were compared with paraffin, ordinary concretes, and some heavy concretes. Both theoretical and experimental calculations have shown that all new heavy concretes are capable of absorbing high rates of gamma and neutron radiation than reference samples. In particular, the D3 sample has the maximum neutron attenuation dose value, which contains 55% chromium ore. D2 is superior gamma shielding concrete and this contains 60% chromium ore, 10% hematite, 5% TiO2 and 5% PbS. The new developed concretes are found to be alternative shielding material for the nuclear energy applications.