Assessment of waste-to-energy potential of ELT management: An actual case study for Erzincan


Gungor O., TOZLU A., ARSLANTÜRK C.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, cilt.41, sa.2, 2022 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 41 Sayı: 2
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1002/ep.13760
  • Dergi Adı: ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, PASCAL, Agricultural & Environmental Science Database, Applied Science & Technology Source, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), Biotechnology Research Abstracts, Chemical Abstracts Core, Compendex, Computer & Applied Sciences, Environment Index, Greenfile, INSPEC, Pollution Abstracts
  • Anahtar Kelimeler: end-of-life tire, energy recovery, Erzincan, material treatment, pyrolysis, TIRE PYROLYSIS OIL, LIFE TIRES, SCRAP TIRES, CATALYTIC PYROLYSIS, VACUUM PYROLYSIS, HEATING RATE, END, GAS, PRODUCTS, FUEL
  • Atatürk Üniversitesi Adresli: Evet

Özet

End-of-life tires (ELTs) and their decomposition are becoming a major environmental issue in the local region as a result of economic and technological challenges. Despite this, ELT management is gaining popularity as an advanced function for treating tires to obtain char, oil, and gas products using pyrolysis. The main goal of this article is to integrate data from an actual recycling plant with the activities of pyrolysis products and their physical properties in the literature. This article presents energy potentials and basic applications of pyrolysis products as well as advances in the current situation in ELT management in the world. Accordingly, an existing ELT management in Erzincan, Turkey is explained in detail by considering the available energy recovery and material treatment activities. In this plant, which has an installed power capacity of 12 MW, approximately 25 tons of pyrolytic oil, 10.7 tons of pyrolytic gas, 24 tons of carbon black and, 10.4 tons of steel are produced daily. The calorific values of carbon black and pyrolytic oil for the products leaving the pyrolysis plant are close to the values in the literature, which is promising. In the plant, the overall thermal efficiency of the system and the engine is found to be 26.34% and 51.24%, respectively. On the other hand, to supply additional power to the plant utilizing exhaust gas discharged to the atmosphere, some thermodynamic models can be developed; additionally, more rational values can be obtained through thermoeconomic and optimization.