Production ofGaN/n-Sithin films using RF magnetron sputtering and determination of some physical properties: argon flow impacts

MANTARCI A., KUNDAKÇİ M.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, cilt.56, sa.3, ss.905-914, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 56 Sayı: 3
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1007/s41779-019-00420-9
  • Dergi Adı: JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Aerospace Database, Communication Abstracts, Metadex, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.905-914
  • Anahtar Kelimeler: GaN, III-Nitride, Argon flow rate, RF magnetron sputtering, Thin film, ZINC-BLENDE, SURFACE-MORPHOLOGY, OPTICAL-PROPERTIES, GAN FILMS, GROWTH, BUFFER, LAYER, PHOTOLUMINESCENCE, INTERFACE, NANORODS
  • Atatürk Üniversitesi Adresli: Evet

Özet

In this study, the gallium nitride (GaN) thin film was successfully deposited on then - Sisubstrate using an RF magnetron sputter under various argon flows. Experimental techniques, such as field-emission scanning electron microscopy (FE-SEM), micro-Raman spectroscopy, ultraviolet/visible/near infrared (UV/Vis/NIR) spectroscopy, atomic force microscopy (AFM), and X-ray diffraction (XRD), were used to explore effects of argon flow on theGaNthin film growth and on some physical properties. XRD results proved thatGaNthin film was polycrystalline in structure with (100) and (110) planes of hexagonalGaN. It was found that structural parameters (grain size, FWHM, crystal quality) of the thin film show a change with argon flows. The possible reasons of this were discussed. From the analysis of Raman results,E-2 (high) optical phonon mode of hexagonalGaNwas observed. From SEM analysis, surface properties of the thin film showed an almost homogeneous, granular structure with some agglomerations due to Van der Waals forces between particles. Change of argon flows slightly changed optical band gap energy of the thin film. Furthermore, it was analyzed and interpreted whether the experimental measurement results support each other. Morphological, structural, and optical properties of theGaNthin film can be changed by controlling the flow of argon.