Optimum design parameters of a heat exchanger

Sahin B., Yakut K., Kotcioglu I., Celik C.

APPLIED ENERGY, cilt.82, sa.1, ss.90-106, 2005 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 82 Sayı: 1
  • Basım Tarihi: 2005
  • Doi Numarası: 10.1016/j.apenergy.2004.10.002
  • Dergi Adı: APPLIED ENERGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.90-106
  • Anahtar Kelimeler: heat-transfer enhancement, Taguchi method, electronics cooling, forced air cooling, LINE QUALITY-CONTROL, PIN-FIN ARRAYS, PERFORMANCE, FLOW, RIBS
  • Atatürk Üniversitesi Adresli: Evet

Özet

In this study, the effects of the longitudinal and lateral separations of consecutively enlarged-contracted arranged fin pairs, widths of the fins, angle of attack, heights of fins and flow velocity on the heat and pressure drop characteristics were investigated using the Taguchi experimental-design method. Nusselt number and friction factor were considered as performance parameters. An L-18(2(1) * 3(7)) orthogonal array was selected as an experimental plan for the eight parameters mentioned above. First of all, each goal was optimized, separately. Then, all the goals were optimized together, considering the priority of the goals, and the optimum results were found to be fin width of 15 mm, angle of attack of 15 degrees, fin height of 100 mm, span-wise distance between fins of 20 mm, stream-wise distance between fins of 10 mm, span-wise distance between slices of 20 mm, stream-wise distances between slices of 20 turn at a flow velocity of 4 m/s. (c) 2004 Elsevier Ltd. All rights reserved.