Effect of transition metals (Nb, Ta, and V) doping on the high-temperature mechanical and tribological properties of CrYN coatings

GÜLTEN G., YAYLALI B., YEŞİLYURT M., TOTİK Y., Kulczyk-Malecka J., Kelly P., ...Daha Fazla

SURFACE & COATINGS TECHNOLOGY, cilt.515, 2025 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 515
  • Basım Tarihi: 2025
  • Doi Numarası: 10.1016/j.surfcoat.2025.132633
  • Dergi Adı: SURFACE & COATINGS TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Biotechnology Research Abstracts, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, INSPEC, Metadex, Civil Engineering Abstracts
  • Anahtar Kelimeler: AISI 316L, High-temperature adhesion, High-temperature tribological testing, Magnetron sputtering, Me-doped CrYN
  • Atatürk Üniversitesi Adresli: Evet

Özet

This study focused on developing a high-temperature tribological coating for AISI 316L stainless steel. CrYN coatings doped with transition metals such as niobium, tantalum, and vanadium (Me-CrYN) were deposited using a closed-field unbalanced magnetron sputtering (CFUBMS) system. In a previous study, the Taguchi L9 orthogonal array design was employed to optimize the deposition parameters based on tribological performance under dry sliding conditions at room temperature. Among the nine experimental runs, the three coatings exhibiting the lowest friction coefficients and highest wear resistance were selected for high-temperature tribological testing. In the present work, these three optimized Me-CrYN coatings were systematically evaluated for their tribological and adhesion properties at elevated temperatures. High-temperature tribological performance was assessed using a pin-on-disc tribometer in ambient air at 450 degrees C, 550 degrees C, and 650 degrees C, with particular attention given to their frictional behavior. Additionally, adhesion strength was evaluated at room temperature via scratch testing, both on the as-deposited coatings and those subjected to high-temperature tribological testing at 450 degrees C, 550 degrees C, and 650 degrees C. The results demonstrate that the Me-CrYN coatings maintain tribomechanical stability at elevated temperatures, with hardness values ranging from 8.8 to 15.3 GPa. Nb-doped coatings exhibited a reduction in friction from similar to 0.55 at room temperature to similar to 0.30 at 650 degrees C (approximate to 45 % decrease), while Ta-doped coatings maintained stable values around 0.40 across all temperatures (<5 % variation). In contrast, V-doped coatings showed an initial rise from similar to 0.13 at room temperature to similar to 0.30 at 450 degrees C (approximate to 115 % increase), but then decreased to similar to 0.10 at 550 degrees C (approximate to 25 % below RT) and similar to 0.12 at 650 degrees C (approximate to 10 % below RT). Adhesion strength was preserved after thermal exposure, supporting their potential for high-temperature applications.