Akademik Veri Yönetim Sistemi
Construction and Building Materials, cilt.439, 2024 (SCI-Expanded)
Researchers recently have focused on geopolymer concrete as it has several advantages compared to traditional Portland cement, such as lower carbon footprint, high early strength, chemical resistance and long-lasting structural performance. This paper designed 192 pull-out specimens to investigate the influence of factors on the bond-slip behavior between geopolymer and steel bar such as curing condition (ambient and 80 °C for 7 hours), longitudinal rib angle, the position of longitudinal bar, bar diameter (12 mm and 24 mm), stirrup usage (with and without stirrup) and bond length (2d and 4d). The maximum bond strength, bond failure modes, and bond stress-slip relations were discussed. The test results showed that the longitudinal rib angle, and the position of rebar play a vital role in determining the bond strength as well as the bar diameter. In comparison with the specimens without the stirrup, the bond performance of specimens with stirrup increased more significantly, and this phenomenon became even more pronounced as the bar diameter increased. The stirrup usage in samples under ambient and heat cure increased the bond strength by an average of 45 % and %40, respectively. Moreover, it has been determined that the curing conditions have a significant effect on the bond performance, as especially the compressive and tensile strengths of the samples under heat cure improve. In samples exposed to both ambient and heat cure, doubling the bond length increased the bond strength by 70 %. Furthermore, increasing the bar diameter increased the bond strength of the samples exposed to ambient and heat curing by a maximum of 84 % and 79 %, respectively. The findings lay the groundwork for understanding the bond behavior of geopolymer, which is critical for the successful application of geopolymer-bonded rebar.