Yayınlar & Eserler

Yayın Ağı
Makaleler 9
Tümü (9)
SCI-E, SSCI, AHCI (7)
SCI-E, SSCI, AHCI, ESCI (7)
Scopus (7)
Diğer Yayınlar (2)

1. 3D printing of biomimetic hierarchical surface textures using L-PBF for improving tribological performance of Ti6Al4V alloy

Kovacı H., Seçer Kavasoğlu Y., Çelik A.
Applied Materials Today , cilt.42, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier

2. Increasing the friction and wear performance of AISI 316L under dry, aqueous and oil lubricated sliding conditions with surface textures fabricated by laser-powder bed fusion (L-PBF)

Türkdayı M., Seçer Kavasoğlu Y., Kovacı H.
Tribology International , cilt.200, 2024 (SCI-Expanded, Scopus) identifier identifier

3. Enhancing high cycle fatigue performance of plasma nitrided AISI 4140 steel by post-aging treatment and direct current magnetic field

Yetim A., KOVACI H., Tekdir H., SEÇER KAVASOĞLU Y., BOZKURT Y. B., ÇELİK A.
Materials Today Communications , cilt.40, 2024 (SCI-Expanded, Scopus) identifier identifier

4. Analysis of electrochemical corrosion performance of 316L stainless steel fabricated and textured by selective laser melting

BOZKURT Y. B., SEÇER KAVASOĞLU Y., ATİK B., KOVACI H., ÇELİK A.
Journal of Manufacturing Processes , cilt.119, ss.293-304, 2024 (SCI-Expanded, Scopus) identifier identifier

5. Pitting corrosion performance of plasma oxidized Cp-Ti and effects of fabrication methods

ATİK B., BOZKURT Y. B., Kavasoğlu Y., KOVACI H., ÇELİK A.
Surface and Coatings Technology , cilt.478, 2024 (SCI-Expanded, Scopus) identifier identifier

6. Comparison study of corrosion behavior for chitosan coated Ti6Al4V alloy produced by selective laser melting and forging

BOZKURT Y. B., Kavasoğlu Y., ATİK B., KOVACI H., UZUN Y., ÇELİK A.
PROGRESS IN ORGANIC COATINGS , cilt.182, 2023 (SCI-Expanded, Scopus) identifier identifier

7. Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

KOVACI H., SEÇER Y.
Surface and Coatings Technology , cilt.400, 2020 (SCI-Expanded, Scopus) identifier identifier

8. THE EFFECT OF WEAR MECHANISM FOR PLASMA OXIDISED CP TI AND ITS ALLOYS ON TRIBOCORROSION PERFORMANCE

Seçer Kavasoğlu Y., Bozkurt Y. B., Kovacı H., Yetim A. F., Çelik A.
Journal of Selcuk-Technic , sa.Özel Sayı, ss.28-38, 2020 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı) Sürdürülebilir Kalkınma

9. THE BIOMECHANICAL ANALYSIS FOR BIODEGRADABLE PURE MAGNESIUM BONE SCREWS UNDER THREE POINT BENDING AND TORSIONAL TEST

Atik B., Bozkurt Y. B., Seçer Kavasoğlu Y., Uzun Y., Kovacı H., Çelik A.
Journal of Selcuk-Technic , sa.Özel Sayı, ss.39-46, 2020 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı) Sürdürülebilir Kalkınma
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 17

1. Additive manufacturing of hip joint prosthesis models via FDM: A comparative analysis of material type and build orientation

Yıldız K., Yetişir Er Ş., Seçer Kavasoğlu Y., Atik B., Bozkurt Y. B., Kovacı H., et al.
2nd International Conference on Engineering, Natural Sciences, and Technological Developments (ICENSTED 2025), Bayburt, Türkiye, 20 - 23 Haziran 2025, ss.25-31, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

2. Improving the Bio-tribocorrosion Performance of Beta-type Ti Alloy Using Electrophoretic Coating Method

Tüzemen Ş. M., Atik B., Seçer Kavasoğlu Y., Erdoğan Ö., Bozkurt Y. B., Çelik A.
5th International Conference on Advanced Engineering Technologies (ICADET 2024), Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.994, (Özet Bildiri)

3. The Effect of Varying OCP Times on Tribocorrosion Behavior of Naturally Passivated Ti6Al4V Alloy in Salt Water

Seçer Kavasoğlu Y., Erdoğan Ö., Atik B., Tüzemen Ş. M., Kovacı H., Uzun Y.
"5th International Conference on Advanced Engineering Technologies (ICADET 2024), Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.1181, (Özet Bildiri)

4. Electrochemical Impedance Spectroscopy Analysis of Time-Dependent Change of Biodegradable CP-Magnesium in Bone Cement

Erdoğan Ö., Seçer Kavasoğlu Y., Tüzemen Ş. M., Atik B., Kovacı H., Uzun Y.
"5th International Conference on Advanced Engineering Technologies (ICADET 2024), Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.830, (Özet Bildiri)

5. A Study on Tailoring the Hydrophilicity Capacity of CP-Mg the Correlation of Bio-Corrosion Character and Surface Energy

Atik B., Tüzemen Ş. M., Erdoğan Ö., Seçer Kavasoğlu Y., Bozkurt Y. B., Çelik A.
5th International Conference on Advanced Engineering Technologies (ICADET 2024), Bayburt, Türkiye, 25 - 27 Eylül 2024, ss.839, (Özet Bildiri)

6. THE INFLUENCE OF DESIGN PATTERNS ON THE MECHANICAL PROPERTIES OF MEW-PRODUCED PCL SAMPLES

Bozkurt Y. B., Seçer Kavasoğlu Y., Atik B., Kovacı H., Uzun Y., Çelik A.
MUNZUR 6. ULUSLARARASI UYGULAMALI BİLİMLER KONGRESİ, Tunceli, Türkiye, 24 - 26 Mayıs 2024, ss.289-296, (Tam Metin Bildiri)

7. IMPROVEMENT OF EIS PERFORMANCE FOR Ti6Al4V ALLOY WITH MEW-PRODUCED PLA/HA COMPOSITE COATING

Bozkurt Y. B., Seçer Kavasoğlu Y., Atik B., Kovacı H., Uzun Y., Çelik A.
17th INTERNATIONAL İSTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE, AND MATHEMATICAL SCIENCES, İstanbul, Türkiye, 28 - 30 Nisan 2024, ss.605-615, (Tam Metin Bildiri)

8. THE ELECTROCHEMICAL CORROSION PERFORMANCE OF COATED BIODEGRADABLE PURE MAGNESIUM BY MELT ELECTROWRITING

Bozkurt Y. B., Atik B., Seçer Kavasoğlu Y., Kovacı H., Uzun Y., Çelik A.
17TH INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS ON LIFE, ENGINEERING, ARCHITECTURE, AND MATHEMATICAL SCIENCES, İstanbul, Türkiye, 28 - 30 Nisan 2024, ss.534-542, (Tam Metin Bildiri)

9. Biomimetic Approach: Innovative Design Solutions from Structures Inspired by Nature

ÇELİK A., SEÇER KAVASOĞLU Y., ATİK B., KOVACI H., BOZKURT Y. B., UZUN Y., et al.
7th International Conference on Advances in Natural and Applied Sciences, Antalya, Türkiye, 17 - 20 Nisan 2024, (Özet Bildiri)

10. An experimental study of erosion corrosion behavior for passive metals

BOZKURT Y. B., SEÇER Y., ATİK B., KOVACI H., YETİM A. F., ÇELİK A.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021, (Özet Bildiri)

11. Improvıng Trıbologıcal Performance With Oxıdatıon Process For Boronızed Ti6Al4V Alloys

Bozkurt Y. B., Seçer Kavasoğlu Y., Kovacı H., Uzun Y., Çelik A.
6th International Conference on Material Science and Technology in Cappadocia, Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.264-268, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

12. Improving tribological performance with oxidationprocess for boronized TI6AL4V alloys

Bozkurt Y. B., Seçer Kavasoğlu Y., Kovacı H., Uzun Y., Çelik A.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.274-278, (Tam Metin Bildiri)

13. Dip Coated of Al2O3 and Graphene Thin Films on 316L Stainless Steel: Tribocorrosion Behaviours

Bozkurt Y. B., Seçer Kavasoğlu Y., Kovacı H., Yetim A. F., Çelik A.
5th International Mediterranean Science and Engineering Congress, Antalya, Türkiye, 21 - 23 Ekim 2020, ss.575-579, (Tam Metin Bildiri)

14. The biomechanical analysis for biodegradable pure magnesium bone screws under three point bending and torsional test

ATİK B., BOZKURT Y. B., SEÇER Y., UZUN Y., KOVACI H., ÇELİK A.
9th International Conference on Advanced Technologies, İstanbul, Türkiye, 10 - 12 Ağustos 2020, (Tam Metin Bildiri)

15. The effect of wear mechanism for plasma oxidised Cp-Ti and its alloys on tribocorrosion performance

SEÇER Y., BOZKURT Y. B., KOVACI H., YETİM A. F., ÇELİK A.
9th International Conference on Advanced Technologies, İstanbul, Türkiye, 10 - 12 Ağustos 2020, (Tam Metin Bildiri)

16. The effect of different texture density and plasma oxidation on tribological and mechanical properties of 316L fabricated by selective laser melting

SEÇER Y., KOVACI H.
5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Türkiye, 17 - 19 Aralık 2019, (Özet Bildiri)

17. Spinal İmplant Grupları İçin İnovatif Test Metodu: Tekrarlı Hareket Altında Tutunma Performansının İncelenmesi

Seçer Kavasoğlu Y., Bozkurt Y. B., Kovacı H., Yetim A. F., Çelik A.
International Congress of Science, Mathematics and Engineering, İzmir, Türkiye, 8 - 10 Kasım 2019, ss.19, (Özet Bildiri) Sürdürülebilir Kalkınma
Metrikler

Yayın

27

Yayın (WoS)

7

Yayın (Scopus)

7

Atıf (WoS)

72

H-İndeks (WoS)

5

Atıf (Scopus)

85

H-İndeks (Scopus)

5

Atıf (Scholar)

105

H-İndeks (Scholar)

5

Proje

11
BM Sürdürülebilir Kalkınma Amaçları