Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel

Surface and Coatings Technology, vol.440, 2022 (Journal Indexed in SCI Expanded) identifier

DRY SLIDING WEAR CHARACTERISTICS OF PLASMA-NITROCARBURIZED Co - Cr - Mo ALLOY

METAL SCIENCE AND HEAT TREATMENT, vol.58, pp.742-747, 2017 (Journal Indexed in SCI) identifier identifier

Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 2-Variable amplitude loading and load interactions

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.672, pp.265-275, 2016 (Journal Indexed in SCI) identifier identifier

Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 1-constant amplitude loading

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.672, pp.257-264, 2016 (Journal Indexed in SCI) identifier identifier

Numerical investigation of mechanical effects caused by various fixation positions on a new radius intramedullary nail

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, vol.18, no.3, pp.316-324, 2015 (Journal Indexed in SCI) identifier identifier identifier

Treatment with α-lipoic acid enhances the bone healing after femoral fracture model of rats.

Naunyn-Schmiedeberg's archives of pharmacology, vol.387, no.11, pp.1025-36, 2014 (Journal Indexed in SCI) identifier identifier identifier

Articles Published in Other Journals

Effects of Boriding, Nitrocarburizing, Nitriding and Post-oxidation Treatments on The Tribological Properties of DIN 32CrMoV12-10 Steel

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.14, no.3, pp.936-949, 2021 (Other Refereed National Journals)

İntramedüller Çivilerin Statik ve Dinamik Eğilme Özelliklerinin Deneysel ve Teorik Olarak İncelenmesi

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.12, pp.595-606, 2019 (Other Refereed National Journals)

Dental implant uygulamalarında ultra-ince tane yapılı titanyumun kullanılabilirliğinin araştırılması

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.18, pp.67-76, 2014 (National Refreed University Journal)

Tibia kırıklarında kullanılan kilitli ve kilitsiz plak fiksasyon sistemlerinin sonlu elemanlar yöntemiyle incelenmesi

Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.18, pp.167-174, 2014 (National Refreed University Journal)

Refereed Congress / Symposium Publications in Proceedings

Comparison of Electrochemical Corrosion Performances Using Variable Scan Rates on Surfaces with Different Layer Thicknesses

1 st International Conference on Advances in Engineering, Architecture, Science and Technology,, Erzurum, Turkey, 15 - 17 December 2021, pp.660

The electrochemical behaviour of Cp-Ti coated by Ti-doped Al2O3 and Ni-doped Al2O3

1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Turkey, 15 - 17 December 2021, pp.1

An Experimental Study of Erosion Corrosion Behavior for Passive Metals

International Conference on Advances in Engineering, Erzurum, Turkey, 15 - 17 December 2021, pp.659

Effects of connector placement on the biomechanical performance of spinal implants under tension and compression loads

1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Turkey, 15 - 17 December 2021, pp.1

Analysis of flow accelerated electrochemical corrosıon properties of different metallic biomaterials

6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Turkey, 26 - 28 November 2021, pp.269-273

Improving tribological performance with oxidationprocess for boronized TI6AL4V alloys

6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Turkey, 26 - 28 November 2021, pp.274-278

Dip Coated of Al2O3 and Graphene Thin Films on 316L Stainless Steel: Tribocorrosion Behaviours

5th International Mediterranean Science and Engineering Congress, Antalya, Turkey, 21 - 23 October 2020, pp.575-578

Improving Electrochemical Corrosion Properties of Ti45Nb by Composite Coating

5th International Mediterranean Science and Engineering Congress,, Antalya, Turkey, 21 - 23 October 2020, pp.654-657

Dry Wear Behaviour of Bio-ceramic Coated cp-Ti by Electrophoretic Deposition

5th International Mediterranean Science and Engineering Congress, Antalya, Turkey, 21 - 23 October 2020, pp.603

The Biomechanical Analysis For Biodegradable Pure Magnesium Bone Screws Under Three Point Bending And Torsional Test

9th International Conference on Advanced Technologies (ICAT’20), İstanbul, Turkey, 10 - 12 August 2020, pp.12

İnvestigatı-ion Of Tribocorrosion Behaviour Of 316L Coated h-BN With Electrophoretic Deposition Technique,

International Conference on Advanced Technologies (ICAT’20), İstanbul, Turkey, 10 - 12 August 2020, pp.3

The Effect Of Wear Mechanism For Plasma Oxidised Cp Ti And Its Alloys On Tribocorrosion Performance

9th International Conference on Advanced Technologies, İstanbul, Turkey, 10 - 12 August 2020, pp.4

Synthesis and characterization of plasma polymerized polyaniline thin films on Ti6Al4V alloy

5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Turkey, 17 - 19 December 2019

The influence of different surface treatment on the behavior of fatigue crack growth of AISI 4140 under two-stage block loading

5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Turkey, 17 - 19 December 2019

The investigation of pull out performance for pure magnesium bone screws in biodegradation perspective

5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Turkey, 17 - 19 December 2019

The effect of different texture density and plasma oxidation on tribological and mechanical properties of 316L fabricated by selective laser melting

5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Turkey, 17 - 19 December 2019

Comparison of electrochemical corrosion behavior of Ti6Al4V produced by selective laser melting

5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Turkey, 17 - 19 December 2019

Determination of fracture micromechanics and fracture toughness of plasma nitrided, DLC coated and duplex surface treated AISI 4140 steel

27th Annual International Conference on Composites or Nano Engineering (ICCE-27), Granada, Nicaragua, 14 - 20 July 2019

Investigation of tribological performance of Ni-Doped Al2O3 film coated Cp-Ti

27th Annual International Conference on Composites or Nano Engineering (ICCE-27), Granada, Nicaragua, 14 - 20 July 2019

Improving static properties and fatigue life of metallic bone plates made of Ti6Al4V alloy using plasma nitriding

1st International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMMEN 2018), Ankara, Turkey, 8 - 09 November 2018, pp.155

Effects of implant-abutment diameter and connection type on the fatigue properties of dental implants

International Conference on Engineering Technologies (ICENTE'18), Konya, Turkey, 26 - 28 October 2018, pp.15

Experimental investigation of the biomechanical performance of rigid and dynamic spinal rod designs

International 9th Biomechanics Conference, Eskişehir, Turkey, 19 - 22 September 2018, pp.17

Comparison of electrochemical properties of TiO2, ZrO2 and TiO2–ZrO2 composite films deposited on Ti45Nb alloys

21th International Conference on Composite Structures (ICCS21), Bologna, Italy, 4 - 07 September 2018, pp.66

Friction and wear properties of B-doped TiO2 thin films produced on Ti6Al4V alloy

3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 July 2018

Comparison of tribological and electrochemical properties of titanium oxide films produced on Cp-Ti by sol-gel and SILAR methods

45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, United States Of America, 23 - 27 April 2018, pp.150

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions

45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, United States Of America, 23 - 27 April 2018, pp.160

Dubleks yüzey işlemi uygulanmış AISI 4140 çeliğinin elektrokimyasal özelliklerinin belirlenmesi

2nd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 21 - 23 September 2017, pp.150

Investigation of corrosion behavior of Ni-doped Al2O3 film coated Cp-Ti

2nd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 21 - 23 September 2017, pp.155

Finite element analysis of biomechanical performance of spinal rods in different geometries

International Conference on Advances and Innovations in Engineering-ICAIE, Elazığ, Turkey, 10 - 12 May 2017, pp.1

Plazma ile nitrürlenmiş AISI 4140 malzemenin dinamik özelliklerinin incelenmesi

Uluslararası Katılımlı 17. Makine Teorisi Sempozyumu, İzmir, Turkey, 14 - 17 June 2015, pp.25

The effect of magnetic field on the wear properties of a ferromagnetic steel

19th International Conference on Wear of Materials, WOM 2013, 14 - 18 April 2013, vol.1, pp.105-110

Plasma nitrocarburising of CoCrCo alloy

2nd International Scientific Conference on Engineering, Antalya, Turkey, 22 - 24 November 2012, pp.359-364

Analysis of forging process in bone plate production

2nd International Scientific Conference on Engineering, Antalya, Turkey, 22 - 24 November 2012, pp.305-310

Wear properties of plasma nitrided Inconel 718 superalloy

13th International Conference on Plasma Surface Engineering-PSE, Garmisch-Partenkirchen, Germany, 10 - 14 September 2012

Books & Book Chapters

Temel Tanımlar ve Kavramlar

in: Makina ve Teçhizat, Bilen Kadir, Editor, Atatürk Üniversitesi Açıköğretim Fakültesi Yayını, pp.4-26, 2020

Kaynak ve Metal (sıcak-soğuk) Kesme İşlemlerinde İSG

in: Elektrik ve Metal İşlerinde İSG, Muhammed Fatih Çora, İhsan Efeoğlu, Editor, Atatürk Üniversitesi, pp.326-347, 2019

Bağlama Elemanları

in: Makina ve Teçhizat, Bilen A., Editor, Atatürk Üniversite Yayınları, Erzurum, pp.1-24, 2017

Expert Reports

Mekanik ve Kimyasal Analiz Raporu

Boru Hatları ile Petrol Taşıma A.Ş. (BOTAŞ), pp.9, Erzurum, 2019

Fore Kazık Makinesi Kelly Aparatı Hasar Analiz Raporu

Dedem Hafriyat İnşaat Taahhüt İş Makineleri İç ve Dış Tic. Ltd. Şti., pp.8, Erzurum, 2018

Sondaj Boruları İnceleme Raporu

Gümrük ve Ticaret Bakanlığı, Erzurum Gümrük Müdürlüğü, pp.4, Erzurum, 2016