Prof. Kadir BİLEN

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Thermo-hydraulic performance of tube with decaying swirl flow generators

BİLEN K., TOKGÖZ N., SOLMAZ İ., Balta T.

APPLIED THERMAL ENGINEERING, vol.200, 2022 (SCI-Expanded)

Experimental based numerical approach for determination of volumetric heat transfer coefficients of modified graphite foams

Gürüf G., Solmus I., Bilen K., Bayer Ö.

APPLIED THERMAL ENGINEERING, vol.174, 2020 (SCI-Expanded)

Investigation of the effect of aluminum porous fins on heat transfer

Bilen K., Gök Ş., Olcay A. B., Solmuş İ.

ENERGY, vol.138, pp.1187-1198, 2017 (SCI-Expanded)

Transient behavior of a cylindrical adsorbent bed during the adsorption process

Solmuş İ., Yamali C., Yıldırım C., Bilen K.

APPLIED ENERGY, vol.142, pp.115-124, 2015 (SCI-Expanded)

The performance of alternative refrigerant gas R152a as mobile air conditioning refrigerant

BİLEN K., KALKIŞIM A. T., SOLMUŞ İ.

Chemical Engineering Transactions, vol.39, pp.1801-1806, 2014 (SCI-Expanded)

The investigation of groove geometry effect on heat transfer for internally grooved tubes

Bilen K., Çetin M., Gul H., Balta T.

APPLIED THERMAL ENGINEERING, vol.29, pp.753-761, 2009 (SCI-Expanded)

Thermal energy storage behavior of CaCl2 6H2O during melting and solidification

BİLEN K., ŞİMŞEK F., KAYGUSUZ K.

Energy Sources, 2008 (SCI-Expanded)

Energy production, consumption, and environmental pollution for sustainable development: A case study in Turkey

Bilen K., Özyurt Ö., Bakırcı K., Karsli S., Erdogan S., Yimaz M., et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, vol.12, pp.1529-1561, 2008 (SCI-Expanded)

Thermal energy storage behavior of CaCl(2)center dot 6H(2)O during melting and solidification

Bilen K., Takgil F., Kaygusuz K.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, vol.30, pp.775-787, 2008 (SCI-Expanded)

Visualization of heat transfer for impinging swirl flow

BAKIRCI K., BİLEN K.

EXPERIMENTAL THERMAL AND FLUID SCIENCE, vol.32, no.1, pp.182-191, 2007 (SCI-Expanded)

Heat transfer and thermal performance analysis of a surface with hollow rectangular fins

Akyol U., Bilen K.

APPLIED THERMAL ENGINEERING, vol.26, pp.209-216, 2006 (SCI-Expanded)

Heat transfer from a surface fitted with rectangular blocks at different orientation angle

Bilen K., Yapici S.

HEAT AND MASS TRANSFER, vol.38, pp.649-655, 2002 (SCI-Expanded)

Thermal performance analysis of a tube finned surface

Bilen K., Akyol U., Yapici S.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, vol.26, pp.321-333, 2002 (SCI-Expanded)

Heat transfer from a plate impinging swirl jet

Bilen K., Bakirci K., Yapici S., Yavuz T.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH, vol.26, pp.305-320, 2002 (SCI-Expanded)

Heat transfer and friction correlations and thermal performance analysis for a finned surface

Bilen K., Akyol U., Yapıcı S.

ENERGY CONVERSION AND MANAGEMENT, vol.42, pp.1071-1083, 2001 (SCI-Expanded)

Taguchi approach for investigation of heat transfer from a surface equipped with rectangular blocks

Bilen K., Yapici S., Çelik C.

Energy Conversion and Management, vol.42, pp.951-961, 2001 (SCI-Expanded)

Articles Published in Other Journals

Modifiye grafit köpük ile hava arasındaki ortalama hacimsel ısı taşınım katsayısının tayini

Gürüf G., Solmaz İ., Yıldırım C., Bilen K.

Tesisat Mühendisliği, no.179, pp.47-58, 2020 (Peer-Reviewed Journal)

Evaluations on energy identity certificate and energy performance calculation method in buildings (BEP-TR2)

Bilen K., Urmamen E., Topçu M. T., Solmaz İ.

Sigma Journal of Engineering and Natural Sciences, vol.11, no.1, pp.103-113, 2020 (ESCI)

EVALUATIONS ON THE ENERGY IDENTITY CERTIFICATE AND THE USABILITY OF CALCULATION METHOD OF BUILDING ENERGY PERFORMANCE (BEP)

Bilen K., Urmamen E., Topcu M. T., Solmaz İ.

SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI, vol.11, no.1, pp.103-113, 2020 (ESCI)

Optimization of Turbocharged Diesel Engines

BİLEN K., CEVİZ M. A.

International Journal of Mechanical and Mechatronics Engineering, 2019 (Scopus)

Optimization of waste gate in the diesel engines with turbocharger

SAFARİAN E., BİLEN K., CEVİZ M. A., SALİMİAS A.

International Journal of Automotive Engineering (IJAE), vol.6, pp.2198-2210, 2016 (Peer-Reviewed Journal)

Otomobil klima sistemlerinde R152a gazı kullanımı ve özellikleri

Bilen K., Kalkışım A. T., Solmuş İ., Bulgurcu H., Hakan Y.

Tesisat Mühendisliği, vol.144, pp.89-97, 2014 (Peer-Reviewed Journal)

Silika jel su çalışma çiftini kullanan adsorpsiyonlu soğutma sisteminin performans analizi

Solmuş İ., Yıldırım C., Bilen K.

Tesisat Mühendisliği, vol.140, pp.52-59, 2014 (Peer-Reviewed Journal)

Faz değişim maddesi ile enerji depolamada erime ve katılaşma zamanının incelenmesi

BİLEN K., ŞİMŞEK F.

Termodinamik, 2008 (Peer-Reviewed Journal)

Tek kanallı çok kanallı ve dönen jetlerin ısı transferine etkileri

BAKIRCI K., BİLEN K.

Mühendis ve Makina Dergisi, vol.44, pp.55-60, 2003 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Energy Efficiency Analysis of Turbocharges with Wastegate

Bilen K., Topcu M. T.

5 th International Anatolian Energy Symposium, Trabzon, Turkey, 24 - 25 March 2021, vol.1, no.1 Sustainable Development

DEĞİŞKEN GEOMETRİ TURBOŞARIN BİR BOYUTLU ANALİZİ

TOPCU M. T., BİLEN K., YILMAZ H. İ.

22. Isı Bilimi ve Tekniği Kongresi, Kocaeli, Turkey, 11 - 14 September 2019, vol.1, pp.226-230

Analysıs of Compressor of Double Stage Turbocharger

BİLEN K., TOPCU M. T., YILMAZ H. İ.

3rd International Conference on Advanced Engineering Technologies (ICADET), Babyburt, Turkey, 19 - 21 September 2019, vol.1, pp.267-272

Evaluations on Energy Identity Certificate and Energy PerformanceCalculation Method in Buildings (BEP-TR2)

Esra U., BİLEN K., TOPCU M. T.

3rd International Conference on AdvancedEngineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, vol.1, pp.1230-1235

Analysıs of Compressor of Double Stage Turbocharger

BİLEN K., TOPCU M. T., YILMAZ H. İ.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, pp.267-273

DİZEL ARAÇ TURBOŞARJIRLARIN TERMODİNAMİK ANALİZİ VE MOTORLA UYUMU

BİLEN K., TOPCU M. T., YILMAZ H. İ.

14. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ – 17-20 NİSAN 2019/İZMİR, İzmir, Turkey, 17 - 20 April 2019, pp.842-851

DİZEL ARAÇ TURBOŞARJIRLARIN TERMODİNAMİK ANALİZİ VE MOTORLA UYUMU

BİLEN K., TOPCU M. T., YILMAZ H. İ.

14.Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 17 - 20 April 2019, pp.842-851

MOTORLU ARAÇLARDA TURBO SİSTEMİNDE TÜRBİN KISMININ BİR BOYUTLU TASARIM VE ANALİZİ

YILMAZ H. İ., BİLEN K., TOPCU M. T.

14. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ – 17-20 NİSAN 2019/İZMİR, İzmir, Turkey, 17 - 20 April 2019, pp.881-887

Motorlu Araçlarda Turbo Sisteminde Kompresör Kısmının Bir Boyutlu Tasarım ve Analizi

TOPCU M. T., BİLEN K., YILMAZ H. İ.

14.Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 17 - 20 April 2019, vol.1, pp.812-818

Otomobil Klima Sistemlerinde Alternatif R152a gazı kullanımı veTermodinamik Açıdan İncelenmesi

KALKIŞIM A. T., BİLEN K.

II.International Conferance on Advanced Engineering Technologies, Bayburt, Turkey, 21 - 23 September 2017, pp.1312-1319

Gözenek yapılı kanatlı yüzeyde ısı transferi ve sürtünme katsayısının incelenmesi

Bilen K., Gök S., Olcay A. B., Solmuş İ.

21.Ulusal Isı Bilimi ve Tekniği Kongresi, 13-16 Eylül 2017, Çorum, Turkey, 13 - 16 September 2017, pp.1149-1155

Thermodynamic and Exergy analysis of the Alternative Refrigerants For Automative AC System

KALKIŞIM A. T., BİLEN K.

ICIEM 2017, Philedelphia, United States Of America, 21 October 2017 - 23 January 2018

Artificial intelligent models for thermodynamic properties of R152a and R134a refrigerants in automobile air conditioning systems

Kalkisim A. T., Bilen K., Hasiloglu A.

2016 Annual Connecticut Conference on Industrial Electronics, Technology and Automation, CT-IETA 2016, Connecticut, United States Of America, 14 - 15 October 2016

Investigation of the Effect of Aluminum Porous Fins on the Heat Transfer

BİLEN K., GOK S., OLCAY A. B.

9 th Internatioanal Conference on Sustainable Energy and Environmental Protection conferenc, 22 September 2016

The comparison of performance by using alternative refrigerant R152a in automobile climate system with different artificial neural network models

Kalkisim A., HAŞILOĞLU A., BİLEN K.

1st International Physics Conference at the Anatolian Peak, IPCAP 2016, Erzurum, Turkey, 25 - 27 February 2016, vol.707

The comparison of performance by using alternative refrigerant R152a in automobile climate system with differant artificial neural network models

KALKIŞIM A. T., HAŞILOĞLU A., BİLEN K.

IPCAP 2016, Erzurum, Turkey, 25 - 27 February 2016, pp.127

Optimum insulation thickness of external walls and energy saving for various fuels in Turkey

BİLEN K., ŞEN S.

the 8th SDEWES’13 Conference on Sustainable Development of Energy, Water and Environment Systems, Dubrovnik, Croatia, 22 - 27 February 2015, pp.508-521

Faz Değişim Maddesiyle Enerji Depolamada Isı Transferini Arttırmak Amacıyla,Dönmeli Akışın Erime ve Katılaşma Zamanı Üzerine Etkisi

ŞİMŞEK F., BİLEN K.

ULIBTK'15, Turkey, 2 - 05 September 2015

The Performance of Alternative Refrigerant Gas R152a as Mobile Air Conditioning Refrigerant

BİLEN K., KALKIŞIM A. T., SOLMUŞ İ.

17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014), Prague, Czech Republic, 23 - 27 August 2014, vol.39, pp.1801-1802