Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Exfoliation behavior of EN AW 7020 with T6, step aging and ultrasonic impact peening processes

Yurdgülü H. I., Sadeler R., Koç B.
MATERIALS TESTING , cilt.5, sa.66, ss.687-695, 2024 (SCI-Expanded) identifier identifier

Dynamic impact analysis of AISI 316L coated with Al-5Mg in air and seawater

Ocal M., Yilmaz H., Sadeler R.
SHIPS AND OFFSHORE STRUCTURES , cilt.19, sa.1, ss.16-26, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Corrosion fatigue behavior of AA 7020 alloy in seawater

Yurdgulu H. I., Sadeler R., Yilmaz H., Koc B.
MATERIALS TESTING , cilt.65, sa.5, ss.743-752, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

COMPARISON OF CORROSION, TRIBOCORROSION AND ANTIBACTERIAL PROPERTIES OF SILVER COATINGS ON Ti15Mo BY MAGNETRON SPUTTERING

Meletlioglu E., Sadeler R.
SURFACE REVIEW AND LETTERS , cilt.30, sa.5, 2023 (SCI-Expanded) Creative Commons License identifier identifier

Structural, mechanical and cytotoxic properties of Ta-doped diamond-like carbon films deposited via radio frequence magnetron sputtering on polyether ether ketone

Keleş S., Duymuş Z., Sadeler R., Ertuğrul M., Meletlioğlu E.
Thin Solid Films , cilt.769, 2023 (SCI-Expanded) identifier identifier

Development of silver film coating on dental ti15mo alloy to enhance two-body wear resistance, biocompatibility and cytotoxicity effect

Meletlioglu E., Sadeler R., Keles S.
MATERIA-RIO DE JANEIRO , cilt.28, sa.2, 2023 (SCI-Expanded) identifier identifier

In vitro investigation of the effect of preheating, thermal cycling, and different chewing environment temperatures on the wear of dental composite resins

SADELER R., Saeidi A., Keles S.
MATERIALS TECHNOLOGY , cilt.37, sa.12, ss.2073-2089, 2022 (SCI-Expanded) identifier identifier

Impact wear behavior of ball burnished 316L stainless steel

Yılmaz H., SADELER R.
SURFACE & COATINGS TECHNOLOGY , cilt.363, ss.369-378, 2019 (SCI-Expanded) identifier identifier

Corrosion fatigue behavior of Al-5Mg coated AISI 316L stainless steel in sodium chloride environments under bending load

Öcal M., SADELER R.
ANTI-CORROSION METHODS AND MATERIALS , cilt.66, sa.1, ss.34-39, 2019 (SCI-Expanded) identifier identifier

Effect of Ball Burnishing Treatment on the Fatigue Behavior of 316L Stainless Steel Operating Under Anodic and Cathodic Polarization Potentials

YILMAZ H., SADELER R.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.11, ss.5393-5401, 2018 (SCI-Expanded) identifier identifier

Investigation of Two- and Three-Body Wear Resistance on Flowable Bulk-Fill and Resin-Based Composites

Yilmaz E. C., Sadeler R.
MECHANICS OF COMPOSITE MATERIALS , cilt.54, sa.3, ss.395-402, 2018 (SCI-Expanded) identifier identifier

Investigation of three-body wear of dental materials under different chewing cycles

Yilmaz E. Ç., SADELER R.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.25, sa.4, ss.781-787, 2018 (SCI-Expanded) identifier identifier

The effect of contact pad hardness on the fretting fatigue behaviour of AZ61 magnesium alloy

SADELER R., Atasoy S.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES , cilt.39, sa.4, ss.502-510, 2016 (SCI-Expanded) identifier identifier

Evaluation of an electroless nickel-boron (Ni-B) coating on corrosion fatigue performance of ball burnished AISI 1045 steel

Sadeler R., Corak S., Atasoy S., Bulbul F.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.51, sa.6, ss.351-356, 2013 (SCI-Expanded) identifier identifier

Influence of relative slip on fretting fatigue behaviour of 2014 aluminium alloy with the age-hardened conditions T4 and T6

Sadeler R., Ocal M.
METALS AND MATERIALS INTERNATIONAL , cilt.18, sa.2, ss.273-277, 2012 (SCI-Expanded) identifier identifier

The Fretting Fatigue of Commercial Hard Anodized Aluminum Alloy

SADELER R., ATASOY S., ARICI A. A., TOTİK Y.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.18, sa.9, ss.1280-1284, 2009 (SCI-Expanded) identifier identifier

Fretting fatigue behaviour of a 2014-T6 aluminium alloy coated with an electroless nickel under rotating bending loading

SADELER R., Atasoy S., ALTUN H.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.47, sa.2, ss.95-100, 2009 (SCI-Expanded) identifier identifier

The effect of manganese phosphate coating treatment on fretting fatigue strength of AISI 1045 steel

TOTİK Y., CAGLAROGLU A., SADELER R.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.45, sa.5, ss.275-281, 2007 (SCI-Expanded) identifier identifier

The effect of residual stresses induced by prestraining on fatigue life of notched specimens

SADELER R., OZEL A., Kaymaz L., TOTIK Y.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.14, sa.3, ss.351-355, 2005 (SCI-Expanded) identifier identifier

The effect of the microsructural difference between surface and center on the hot workability of AA 6063 homogenized ingot

TOTİK Y., GAVGALI M., SADELER R., Kaymaz I.
JOURNAL OF ADVANCED MATERIALS , cilt.36, sa.4, ss.53-59, 2004 (SCI-Expanded) identifier identifier

Improvements of fatigue behaviour in 2014 Al alloy by solution heat treating and age-hardening

SADELER R., TOTIK Y., GAVGALI M., Kaymaz I.
MATERIALS & DESIGN , cilt.25, sa.5, ss.439-445, 2004 (SCI-Expanded) identifier identifier

The effect of homogenisation treatment on cold deformations of AA 2014 and AA 6063 alloys

TOTIK Y., SADELER R., Kaymaz I., GAVGALI M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.147, sa.1, ss.60-64, 2004 (SCI-Expanded) identifier identifier

The effects of artificial aging on wear properties of AA 6063 alloy

GAVGALI M., Totik Y., SADELER R.
MATERIALS LETTERS , cilt.57, ss.3713-3721, 2003 (SCI-Expanded) identifier identifier

The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions

Totik Y., SADELER R., ALTUN H., GAVGALI A.
MATERIALS & DESIGN , cilt.24, sa.1, ss.25-30, 2003 (SCI-Expanded) identifier identifier

Corrosion behavior of 90%Cu-10%Ni alloy at different rotation speeds

GAVGALI M., Kaymaz I., TOTIK Y., SADELER R.
CORROSION REVIEWS , cilt.20, ss.403-414, 2002 (SCI-Expanded) identifier identifier

The investigation of hot workability of AA 6063/SiC composites with different SiC particulate volume fraction

TOTIK Y., SADELER R., GAVGALI M., Kaymaz I.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.10, sa.4, ss.279-286, 2002 (SCI-Expanded) identifier identifier

An investigation of the relationship between heat treatment and microstructure in (TiAlV)N and (TiAl)N ceramic films

Totik Y., Efeoglu I., Gavgali M., Sadeler R.
MATERIALS CHARACTERIZATION , cilt.47, sa.1, ss.55-60, 2001 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Magnetron Sputtering ile Ti6AL4V Üzerindeki Gümüş Kaplamaların Korozyon ve Antibakteriyel Özelliklerinin Karşılaştırılması

Meletlioğlu E., Sadeler R.
Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.28, sa.2, ss.629-640, 2023 (Hakemli Dergi) Creative Commons License identifier

A Literature Review on Chewing Simulation and Wear Mechanisms of Dental Biomaterials

YILMAZ E. Ç., SADELER R.
Journal of Bio- and Tribo-Corrosion , cilt.7, sa.3, ss.1-10, 2021 (Scopus) identifier

Evaluation of contact-wear behavior of lithium disilicate glass ceramic materials; In vitro study

Yilmaz E. C., SADELER R.
BIOMEDICAL AND BIOTECHNOLOGY RESEARCH JOURNAL , cilt.5, sa.2, ss.166-169, 2021 (ESCI) identifier

Effect of different thermal change tests of micro tensile strength behavior bio-composite materials; In vitro study

YILMAZ E. Ç., SADELER R.
Biomedical Research Journal , cilt.8, 2021 (Hakemli Dergi)

Effects of Contact‑Stress on Wear Behavior ofZirconia‑Reinforced Lithium Silicate Glass‑Ceramic

YILMAZ E. Ç., SADELER R.
Biomedical and Biotechnology Research Journal (BBRJ) , cilt.4, sa.1, ss.51, 2020 (ESCI) identifier identifier

Effect of artificial aging environment and time on mechanical properties of composite materials

YILMAZ E. Ç., SADELER R.
Journal of Dental Research and Review , cilt.5, sa.4, ss.111-115, 2019 (Hakemli Dergi)

Effect of ambient pH and different chewing cycle of contact wear on dental composite material

YILMAZ E. Ç., SADELER R., YEŞİL DUYMUŞ Z., ÖZDOĞAN A.
Dentistry and Medical Research , cilt.6, ss.46-50, 2018 (Hakemli Dergi)

YAPAY AĞIZ SIVISINDA TERMAL ÇEVRİMİN KOMPOZİT RESTORATİF MALZEMELERİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNDEKİ ETKİSİ

YILMAZ E. Ç., SADELER R.
Technological Applied Sciences , cilt.12, ss.38-42, 2017 (Hakemli Dergi)

Effects of two-body wear on microfill, nanofill, and nanohybrid restorative composites

YILMAZ E. Ç., SADELER R., YEŞİL DUYMUŞ Z., ÖCAL M.
Biomedical and Biotechnology Research Journal (BBRJ) , cilt.1, ss.25, 2017 (Scopus) identifier

Effect of thermal cycling andmicrohardness on roughness ofcomposite restorative materials

YILMAZ E. Ç., SADELER R.
Journal of Restorative Dentistry , cilt.3, ss.93-96, 2016 (Scopus)

Akımsız Nikel KaplanmışAlüminyum Alışımının FrettingYorulma Davranışının Farklı TemasBasınçları Altında İncelenmesi

SADELER R., ATASOY S., YEŞİLDAL R., ARICI A. A.
Metal Dünyası , ss.108-111, 2008 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Comparison of Corrosion and Antibacterial Properties of Silver Coatings on Ti6AL4V by Magnetron Sputtering

SADELER R., MELETLİOĞLU E.
Global Summit on Advanced Materials and Sustainable Energy (G-AMSE22), Van, Türkiye, 03 Ekim 2022

INVESTIGATION OF THE EFFECT OF ARTIFICIAL AGING ENVIRONMENTTEMPERATURE ON MECHANICAL BEHAVIOR OF BIO-COMPOSITE MATERIALWITH NANO FILLER

YILMAZ E. Ç., SADELER R.
4th INTERNATIONAL ENERGY ENGINEERING CONGRESS, Türkiye, 24 - 25 Ekim 2019

EVALUATION OF WEAR BEHAVIOUR OF LITHIUM DISILICATEGLASS CERAMIC MATERIALS UNDER IN VITRO CHEWING TESTS

YILMAZ E. Ç., SADELER R.
International Conference on Multidisciplinary, Science, Engineeringand Technology (IMESET’18 Dubai), Dubai, Birleşik Arap Emirlikleri, 25 - 28 Ekim 2018

EFFECT OF ARTIFICIAL AGING ENVIRONMENT ON MECHANICAL PROPERTIES OF COMPOSITE MATERIALS

YILMAZ E. Ç., SADELER R.
2nd INTERNATIONAL ENERGY AND ENGINEERING CONFERENCE 2017, Gaziantep, Türkiye, 12 - 13 Ekim 2017

EVALUATION OF WEAR BEHAVIOUR OF COMPOSITE MATERIALS UNDER DIFFERENT CHEWING LOADING

YILMAZ E. Ç., SADELER R.
2nd INTERNATIONAL ENERGY AND ENGINEERING CONFERENCE 2017, Gaziantep, Türkiye, 12 - 13 Ekim 2017

Effect of Ambient pH of Wear on Dental Composite Material

YILMAZ E. Ç., SADELER R., YEŞİL DUYMUŞ Z., ÖZDOĞAN A.
International Conference on Advanced Engineering Technologies, Türkiye, 21 - 23 Eylül 2017

Effect of Stroge Aftificial Saliva on Surface Roughness and Microhardness of Restorative Composite Materials

YILMAZ E. Ç., SADELER R.
International Conference on Advanced Engineering Technologies, Türkiye, 21 - 23 Eylül 2017

Effect of Ambient pH of Wear on Dental Composite Material

YILMAZ E. Ç., SADELER R., YEŞİL DUYMUŞ Z., ÖZDOĞAN A.
II. International Conference on Advanced Engineering Technologies, Türkiye, 21 - 23 Eylül 2017

WEAR PROPERTIES OF NANOFILLED AND MICROFILLED COMPOSITE RESTORARIVE MATERIALS

YILMAZ E. Ç., SADELER R.
International Energy and Engineering Conference 2016, 14 Ekim 2015 - 15 Ekim 2016

YAPAY AĞIZ SIVISINDA TERMAL ÇEVRİMİN KOMPOZİT RESTORATİF MALZEMELERİNİN YÜZEY PÜRÜZLÜLÜĞÜ ÜZERİNDEKİ ETKİSİ

YILMAZ E. Ç., SADELER R.
14.Uluslararası Korozyon Sempozyumu Kongre, 5 - 07 Ekim 2016

WEAR PROPERTIES OF NANOFILLED AND MICROFILLED COMPOSITE RESTORARIVE MATERIALS

YILMAZ E. Ç., SADELER R.
International Energy and Engineering Conference 2016, 13 - 14 Ekim 2016

Investigation of Mechanical Properties of Restorative Composites After Artifical Aging

YILMAZ E. Ç., SADELER R., ÖNER İ. V., YEŞİLYURT M. K.
International Energy and Engineering Conference 2016, 13 - 14 Ekim 2016

Investigation of Mechanical Properties of Restorative Composites after Artificial Aging

YILMAZ E. Ç., SADELER R., ÖNER İ. V., YEŞİLYURT M. K.
Uluslararası Enerji & Mühendislik Konferansı 2016, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.739-743

Kitap & Kitap Bölümleri

Malzeme Bilgisi

SADELER R.
Makina ve Teçhizat, , Editör, Açık Öğretim Fakültesi, 2017

Metrikler

Yayın

52

Atıf (WoS)

283

H-İndeks (WoS)

8

Atıf (Scopus)

366

H-İndeks (Scopus)

10

Atıf (Scholar)

4

H-İndeks (Scholar)

1

Proje

22

Fikri Mülkiyet

3

Tez Danışmanlığı

18

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları