Yayınlar & Eserler

Yayın Ağı
Makaleler 27
Tümü (27)
SCI-E, SSCI, AHCI (23)
SCI-E, SSCI, AHCI, ESCI (23)
Scopus (24)
TRDizin (4)

1. Corrosion and structural properties of lightweight magnesium and aluminum alloy cores based sandwich composites

Keleş A., Karabudak F., ACAR V., Kula M. E., ASLAN M., KARABACAK A. H., et al.
Polymer Composites , cilt.46, sa.14, ss.12691-12706, 2025 (SCI-Expanded, Scopus) identifier identifier

2. A novel strengthening process for masonry tower-type structures with irregular geometry using carbon fiber composite ropes

Cakir F., ACAR V., Zülfikar A. C., Tutar A. I.
Bulletin of Earthquake Engineering , cilt.23, sa.13, ss.5625-5664, 2025 (SCI-Expanded, Scopus) identifier identifier

3. Mechanical Characterization of Graphene-Enhanced Fiber Rope Composites for Strengthening-Oriented Applications

Haberdar A. E., ACAR V., Cakir F.
Polymers , cilt.17, sa.17, 2025 (SCI-Expanded) identifier identifier

4. Numerical Modal Analysis of Adhesively Bonded Joints of Aramid Fiber Composites with Interply and Intraply Carbon Fiber Hybridization

ACAR V.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.18, sa.2, ss.618-630, 2025 (Hakemli Dergi)

5. Characterization of Dry Woven Fabrics Strengthened Polymer Concrete Composites

ACAR V.
ACS Omega , cilt.10, sa.21, ss.22235-22246, 2025 (SCI-Expanded) identifier identifier

6. Numerical analysis of modal and flexural behavior of nanocomposite adhesively bonded joints

Hülagü B., Acar V., Çakır F., Akbulut H.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.47, sa.4, 2025 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

7. Effect of Manufacturing Parameters on Low-Velocity Impact Behavior of Aramid, Carbon and Glass Fiber Reinforced Polymer Composites Using Taguchi Experimental Design

Aydin M. R., ACAR V., Cakir F., GÜNDOĞDU Ö.
APPLIED COMPOSITE MATERIALS , 2025 (SCI-Expanded, Scopus) identifier

8. Experimental and numerical assessment of intraply hybrid composites strengthened RC deep beams

Cakir F., ACAR V., Aydin M. R.
Mechanics of Advanced Materials and Structures , 2025 (SCI-Expanded, Scopus) identifier

9. Impact of hybrid and non-hybrid Fiber Reinforced Polymers on mechanical performance of concrete

Cakir F., Aydin M. R., ACAR V., Yildirim P.
Construction and Building Materials , cilt.451, 2024 (SCI-Expanded, Scopus) identifier

10. Recycled Ti6Al4V alloy powder reinforced polyurethane core based sandwich structures: Mechanical and modal properties

Aydin O. A., ACAR V., Aydin M. R., HÜLAGÜ B., Khan T., Unal H. Y., et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.43, sa.19-20, ss.1113-1132, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

11. Flexural and thermal characterization of epoxy composites reinforced with nanoparticles synthesized from waste walnut husk with green synthesis method

Oner G., Nadaroğlu H., Acar V., Gök S.
BIOMASS CONVERSION AND BIOREFINERY , cilt.14, sa.17, ss.20201-20212, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

12. Interply hybridization of hollow glass fiber reinforced vascular composites

Acar V., Seydibeyoglu M. O., Altan M. C.
POLYMER COMPOSITES , cilt.45, sa.9, ss.8163-8175, 2024 (SCI-Expanded, Scopus) identifier identifier

13. Vibration Response of Thermoplastic Veil Interleaved Carbon Fiber Reinforced Epoxy Composites

ACAR V., TARİH Y. S., GÜNDOĞDU Ö., YAR A.
Türk Doğa ve Fen Dergisi , cilt.13, sa.1, ss.128-132, 2024 (TRDizin) identifier

14. An experimental study on RC beams shear-strengthened with Intraply Hybrid U-Jackets Composites monitored by digital image correlation (DIC)

Cakir F., Raci Aydin M., Acar V., Aksar B., Cem Akkaya H.
Composite Structures , cilt.323, 2023 (SCI-Expanded, Scopus) identifier identifier

15. Comparative dynamic analysis of carbon, aramid and glass fiber reinforced interply and intraply hybrid composites

Raci Aydin M., ACAR V., Cakir F., GÜNDOĞDU Ö., AKBULUT H.
Composite Structures , cilt.291, 2022 (SCI-Expanded, Scopus) identifier identifier

16. Strengthening of reinforced concrete beams without transverse reinforcement by using intraply hybrid composites

Cakir F., ACAR V., Aydin M. R., Aksar B., Yildirim P.
CASE STUDIES IN CONSTRUCTION MATERIALS , cilt.15, 2021 (SCI-Expanded, Scopus) identifier identifier

17. Experimental modal analysis of graphene nanoparticle-reinforced adhesively bonded double strap joints

Hülagü B., Acar V., Aydın M. R., Aydın O. A., Gök S., Ünal H. Y., et al.
JOURNAL OF ADHESION , cilt.97, sa.12, ss.1107-1135, 2021 (SCI-Expanded, Scopus) identifier identifier

18. Low-velocity impact and bending response of graphene nanoparticle-reinforced adhesively bonded double strap joints

HÜLAGÜ B., ÜNAL H. Y., ACAR V., Khan T., Aydın M. R., Aydın O. A., et al.
Journal of Adhesion Science and Technology , cilt.35, sa.22, ss.2391-2409, 2021 (SCI-Expanded, Scopus) identifier identifier

19. Graphene oxide modified carbon fiber prepregs: A mechanical comparison of the effects of oxidation methods

ACAR V., ERDEN S., SARIKANAT M., Seki Y., AKBULUT H., Seydibeyoğlu M.
Express Polymer Letters , cilt.14, sa.12, ss.1106-1115, 2020 (SCI-Expanded, Scopus) identifier identifier

20. Experimental investigation of mechanical and modal properties of Al2O3 nanoparticle reinforced polyurethane core sandwich structures

Khan T., Aydın O. A., ACAR V., Aydın M. R., HÜLAGÜ B., BAYRAKÇEKEN H., et al.
Materials Today Communications , cilt.24, 2020 (SCI-Expanded, Scopus) identifier identifier

21. A review on recent advances in sandwich structures based on polyurethane foam cores

Khan T., Acar V., Aydin M. R., Hülagü B., Akbulut H., Seydibeyoğlu M. Ö.
Polymer Composites , cilt.41, sa.6, ss.2355-2361, 2020 (SCI-Expanded, Scopus) identifier identifier

22. Finite element analysis of the impact of screw insertion distal to the trochanter minor on the risk of iatrogenic subtrochanteric fracture

SENSOZ E., ÖZKAL F. M., ACAR V., Cakir F.
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine , cilt.232, sa.8, ss.807-818, 2018 (SCI-Expanded, Scopus) identifier identifier identifier

23. Inter-ply Hibrit Kompozit Yapılarda Elyaf Diziliş Sıralamasının Mekanik ve Dinamik Özelliklere Etkisi

AYDIN M. R., ACAR V., YAPICI F., YILDIZ K., TOPCU M. V., GÜNDOĞDU Ö.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.8, sa.3, ss.255-263, 2018 (Scopus)

24. Strengthening of concrete beams by monolayer prepreg composites with and without graphene reinforcement

ACAR V., CAKIR F., UYSAL H., Seydibeyoglu M. O., AKBULUT H., MOSALAM K. M.
Construction and Building Materials , cilt.151, ss.866-880, 2017 (SCI-Expanded, Scopus) identifier identifier

25. Combined effects of chopped carbon and glass fibres on mechanical properties of lime-based mortar

Seker B. S., CAKIR F., ACAR V., Seydibeyoglu M. O., AKBULUT H.
Advanced Composites Letters , cilt.26, sa.2, ss.41-48, 2017 (SCI-Expanded, Scopus) identifier identifier

26. Experimental modal analysis of masonry arches strengthened with graphene nanoplatelets reinforced prepreg composites

ÇAKIR F., UYSAL H., ACAR V.
MEASUREMENT , cilt.90, ss.233-241, 2016 (SCI-Expanded, Scopus) identifier identifier

27. Karbon Elyaf Takviyeli Prepreg Kompozitlerde Arayüzey Mekaniğinin Karbon Nanoyapı Katkısıyla İyileştirilmesi

ACAR V., AKBULUT H., SARIKANAT M., SEYDİBEYOĞLU M. Ö., SEKİ Y., ERDEN S.
Makine Teknolojileri Elektronik Dergisi (elektronik) , cilt.10, sa.3, ss.43-51, 2013 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 15

1. Flexural Behavior of Fiber Rope Core-Based Sandwich Composites

Gündoğdu A., Acar V., Çakır F., Yazıcı M.
ASES X. International Health, Engineering and Sciences Congress, Sinop, Türkiye, 25 - 27 Nisan 2025, ss.35, (Özet Bildiri)

2. Modal and Buckling Analysis of Short Carbon Fiber Reinforced Polyamide

Doğru A., Acar V., Seydibeyoğlu M. Ö.
VI. International Ege Composite Materials Symposium KOMPEGE 2025, İzmir, Türkiye, 27 - 29 Kasım 2024, (Özet Bildiri)

3. Numerical Analysis of Vibration Response of Aramid Fiber Reinforced Self-Healing Composites

ACAR V.
5th International Conference on Advanced Engineering Technologies ICADET 2024, Türkiye, 25 - 27 Eylül 2024, (Özet Bildiri)

4. Production of Bi2O3 NPs and NiO NPs nanoparticle doped epoxy nanocomposites synthesized by green synthesis method and investigation of their bending strength

Öner G., Acar V., Nadaroğlu H., Gök S.
World Congress on Applied Nanotechnology (W-CAN 2021), Erzurum, Türkiye, 24 - 26 Kasım 2021, ss.64, (Özet Bildiri)

5. Preparation of Ce2O3 NPs and SrO NPs nanoparticle doped epoxy nanocomposites synthesized by green synthesis method and investigation of their bending strength

Öner G., Nadaroğlu H., Acar V., Gök S.
World Congress on Applied Nanotechnology (W-CAN 2021), Erzurum, Türkiye, 24 - 26 Kasım 2021, ss.63, (Özet Bildiri)

6. Femur boyun kırıklarının tedavisinde kullanılan kanüllü vida fiksasyonunun iatrojenik subtrokanterik kırılma riski üzerindeki etkilerinin sonlu elemanlar yöntemi ile incelenmesi

SENSOZ E., ÇAKIR F., ÖZKAL F. M., ACAR V.
9th International Biomechanics Congress, Eskişehir, Türkiye, 19 - 22 Eylül 2018, ss.475-479, (Tam Metin Bildiri)

7. EFFECT OF DISPERSION QUALITY ON EXPERIMENTAL DAMPING BEHAVIOUR OF GRAPHENE MODIFIED STRUCTURAL ADHESIVES

HÜLAGÜ B., ACAR V., AYDIN O. A., ÜNAL H. Y., AYDIN M. R., KHAN T., et al.
IV. INTERNATIONAL EGE COMPOSITE MATERIALS SYMPOSIUM, İzmir, Türkiye, 6 - 08 Eylül 2018, ss.335-345, (Tam Metin Bildiri)

8. Influence of Stacking Sequence in Lamineted Composite Structures on theMechanical and Dynamics Properties

GÜNDOĞDU Ö., AYDIN M. R., ACAR V., YAPICI F., YILDIZ K., TOPÇU M. V.
II. International Iğdır Symposium, 9 - 11 Kasım 2017, (Özet Bildiri)

9. Reçinesine Grafen ve Karbon Nanotüp Eklenmesinin Karbon Elyaf Takviyeli Kompozitlerin Mekanik Özellikleri ve Darbe Davranışları Üzerindeki Etkileri

F Azimpour S., Acar V., Akbulut H., M Ozgür S.
MÜHENDİSLİKTE YENİ TEKNOLOJİLER SEMPOZYUMU, Bayburt, Türkiye, 22 - 23 Ekim 2015, (Özet Bildiri)

10. Grafen Nanopartikül ve Karbon Nanotüp Katkılı Elyaf Polimer Kompozitlerin Serbest Titreşim ve Burkulma Analizi

Aydın M. R., Azimpour F., Acar V., Şakar G., Akbulut H., Seydibeyoğlu M. Ö.
Uluslararası Katılımlı 17. Makina Teorisi Sempozyumu, İzmir, Türkiye, 14 - 17 Haziran 2015, (Tam Metin Bildiri)

11. Grafen ve karbon nanotüp katkısının bazalt elyaf takviyeli epoksİ kompozitlerin eğilme davranışlarına etkileri

Seydibeyoğlu M. Ö., Acar V., Azimpour F., Akbulut H.
IV th INTERNATIONAL POLYMERIC COMPOSITES SYMPOSIUM, İzmir, Türkiye, 7 - 09 Mayıs 2015, (Özet Bildiri)

12. Strengthening of Brick Masonry Arches with Carbon Fiber Prepreg Composites

CAKIR F., UYSAL H., ACAR V.
11th International Congress on Advances in Civil Engineering, İstanbul, Türkiye, 21 - 25 Ekim 2014, (Tam Metin Bildiri)

13. Cam Elyaf Takviyeli Kompozitlerin Düşük Hızlı Darbe Davranışlarının Nümerik Analizi

Akbulut H., Karadayı S., Shıshsevan F. A., Acar V.
MÜHENDİSLİKTE YENİ TEKNOLOJİLER SEMPOZYUMU, Bayburt, Türkiye, 22 - 23 Ekim 2015, (Özet Bildiri)

14. Effect Of Carbon Nanotube Added Adhesive On The Strength Of Adhesively Bonded Joint

ÖNER G., AKPINAR S., GÜLTEKİN K., ACAR V., ÖZEL A.
ICCE 22, 22nd Annual International Conference on Composites or Nano Engineering, 13 - 19 Haziran 2014, (Tam Metin Bildiri)

15. Effect Of Graphene Nanocomposite Adhesives On The Strength Of Adhesively Bonded Single-Lap Joint

ACAR V., GÜLTEKİN K., AKPINAR S., ÖNER G., AKBULUT H., ÖZEL A.
ICCE-22, 22nd Annual International Conference on Composites or Nano Engineering, 13 - 19 Haziran 2014, (Tam Metin Bildiri)
Kitaplar 3

1. Mechanical properties of nanoparticle-based polymer composites

Kara Y., Acar V., Seydibeyoğlu M. Ö.
Nanoparticle-Based Polymer Composites, Sanjay Mavinkere Rangappa,Jyotishkumar Parameswaranpillai,Yashas Gowda T.G,Suchart Siengchin,M.Ozgur Seydibeyoglu, Editör, Elsevier Science, Oxford/Amsterdam , Cambridge, ss.95-118, 2022

2. Lightweight Polymer Composites from Wood Flour, Metals, Alloys, Metallic Fibers, Ceramics

Teke E., Sütçü M., Acar V., Seydibeyoğlu M. Ö.
Lightweight Polymer Composite Structures Design and Manufacturing Techniques, Sanjay Mavinkere Rangappa,Jyotishkumar Parameswaranpillai,Suchart Siengchin,Lothar Kroll, Editör, CRC, New York , Florida, ss.89-102, 2020

3. Basalt Fibers

Acar V., Cakır F., Alyamaç E., Seydıbeyoglu M. O.
Fiber Technology for Fiber-reinforced Composites, Seydibeyoglu,M.O.,Mohanty,A. K.,Misra,M., Editör, Woodhead Publishing, Elsevier Science, Oxford/Amsterdam, Oxford, ss.169-186, 2017
Metrikler

Yayın

45

Yayın (WoS)

23

Yayın (Scopus)

24

Atıf (WoS)

325

H-İndeks (WoS)

11

Atıf (Scopus)

372

H-İndeks (Scopus)

11

Atıf (Scholar)

491

H-İndeks (Scholar)

13

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Atıf (Sobiad)

46

H-İndeks (Sobiad)

3

Atıf (Diğer Toplam)

9

Proje

21
BM Sürdürülebilir Kalkınma Amaçları