Prof. Dr. Yaşar TOTİK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Friction and corrosion characterization and parametric optimization of Nb-doped hydrogenated amorphous carbon (a-C:H) thin films

Efeoğlu İ., Totik Y., Gülten G., Yaylalı B., Yeşilyurt M., Parvin B. G.

Surface and Coatings Technology , cilt.498, 2025 (SCI-Expanded)

Investigation of wear behavior of graphite additive composite coatings deposited by micro arc oxidation-hydrothermal treatment on AZ91 Mg alloy

Kucukosman R., ŞÜKÜROĞLU E. E., TOTİK Y., ŞÜKÜROĞLU S.

SURFACES AND INTERFACES , cilt.22, 2021 (SCI-Expanded)

Effects of graphene oxide addition on wear behaviour of composite coatings fabricated by plasma electrolytic oxidation (PEO) on AZ91 magnesium alloy

Kucukosman R., ŞÜKÜROĞLU E. E., TOTİK Y., ŞÜKÜROĞLU S.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.35, sa.3, ss.242-255, 2021 (SCI-Expanded)

Effects of voltage on the components of surface integrity of Al(2)O(3)ceramic coatings on AA2024 by plasma electrolytic oxidation

Matin R., Totik Y., Şüküroğlu E. E., Efeoğlu İ., Santos T. G.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.34, sa.18, ss.1971-1981, 2020 (SCI-Expanded)

Omega 3 (DHA) Treatment of Collagenase-Induced Achilles Tendinopathy in Rats: Analyses of Histopathological and Biomechanical Aspects

Gundogdu K., Tasci S. Y., Gundogdu G., Kapakin K. A., Miloglu F. D., TOTİK Y.

ACTA PHYSIOLOGICA , cilt.227, ss.42, 2019 (SCI-Expanded)

The adhesion and tribological properties of c-BN films deposited by high power impulse magnetron sputtering

Efeoğlu İ., Totik Y., Keleş A., Gulten G., Ersoy K., Durkaya G.

Ceramics International , cilt.45, sa.3, ss.3000-3006, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Differential scanning calorimetry (DSC) and Ni+2 release analysis of NiTi-shape-memory dental alloys coated by micro-arc oxidation (MAO) method

YEŞİLDAL R., Karabudak F., Sukuroglu E. E., Sukuroglu S., ZAMANLOU H., BAYINDIR F., et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING , cilt.124, sa.8, 2018 (SCI-Expanded)

Adhesion and multipass scratch characterization of Ti:Ta-DLC composite coatings

Cicek H., KELEŞ A., TOTİK Y., EFEOĞLU İ.

DIAMOND AND RELATED MATERIALS , cilt.83, ss.80-86, 2018 (SCI-Expanded)

Investigation of high temperature wear resistance of TiCrAlCN/TiAlN multilayer coatings over M2 steel

Sukuroglu E. E., BARAN Ö., TOTİK Y., EFEOĞLU İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.32, sa.13, ss.1428-1436, 2018 (SCI-Expanded)

A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates

Cicek H., BARAN Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.296-303, 2017 (SCI-Expanded)

Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels

KELEŞ A., Cicek H., BARAN Ö., TOTİK Y., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.168-173, 2017 (SCI-Expanded)

The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy

BARAN Ö., KELEŞ A., Cicek H., TOTİK Y., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.332, ss.312-318, 2017 (SCI-Expanded)

The effect of TiO2 coating on biological NiTi alloys after micro-arc oxidation treatment for corrosion resistance

Sukuroglu E. E., Sukuroglu S., AKAR K., TOTİK Y., EFEOĞLU İ., ARSLAN E.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.231, sa.8, ss.699-704, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

An Investigation of Corrosion Resistance and Antibacterial Sensitivity Properties of Nano-Ag-Doped Coating and Coating Grown on NiTi Alloy with the Micro-Arc Oxidation Process

Karabudak F., YEŞİLDAL R., Sukuroglu E. E., Sukuroglu S., ZAMANLOU H., DİKBAŞ N., et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.42, sa.6, ss.2329-2339, 2017 (SCI-Expanded)

The effect of plasma electrolytic oxidation process parameters on the tribocorrosion properties of TiO2 coatings

Sukuroglu E. E., FARZI H., Sukuroglu S., TOTİK Y., ARSLAN E., EFEOĞLU İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.31, sa.12, ss.1361-1373, 2017 (SCI-Expanded)

The investigation of adhesion and fatigue properties of TiN/TaN multilayer coatings

BARAN Ö., Sukuroglu E. E., EFEOĞLU İ., TOTİK Y.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.30, sa.20, ss.2188-2200, 2016 (SCI-Expanded)

A low temperature in-situ crystalline TiNi shape memory thin film deposited by magnetron sputtering

Cicek H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E.

SURFACE & COATINGS TECHNOLOGY , cilt.284, ss.90-93, 2015 (SCI-Expanded)

The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel

Cicek H., BARAN Ö., DEMIRCI E. E., TAHMASEBIAN M., TOTİK Y., EFEOĞLU İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.28, sa.12, ss.1140-1148, 2014 (SCI-Expanded)

Adhesion and fatigue properties of Ti/TiB2/MoS2 graded-composite coatings deposited by closed-field unbalanced magnetron sputtering

BIDEV F., BARAN Ö., ARSLAN E., TOTİK Y., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.215, ss.266-271, 2013 (SCI-Expanded)

Wear and adhesion resistance of duplex coatings deposited on Ti6Al4V alloy using MAO and CFUBMS

ARSLAN E., TOTİK Y., DEMIRCI E. E., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.214, ss.1-7, 2013 (SCI-Expanded)

Investigation of wear, corrosion and tribocorrosion properties of AZ91 Mg alloy coated by micro arc oxidation process in the different electrolyte solutions

DEMIRCI E. E., ARSLAN E., EZİRMİK K. V., BARAN Ö., TOTİK Y., EFEOĞLU İ.

THIN SOLID FILMS , cilt.528, ss.116-122, 2013 (SCI-Expanded)

The investigation of the tribocorrosion properties of DLC coatings deposited on Ti6Al4V alloys by CFUBMS

ARSLAN E., TOTİK Y., EFEOĞLU İ.

PROGRESS IN ORGANIC COATINGS , cilt.74, sa.4, ss.768-771, 2012 (SCI-Expanded)

Comparison of structure and tribological properties of MoS2-Ti films deposited by biased-dc and pulsed-dc

ARSLAN E., TOTİK Y., EFEOĞLU İ.

PROGRESS IN ORGANIC COATINGS , cilt.74, sa.4, ss.772-776, 2012 (SCI-Expanded)

The wear behaviour of duplex treated AISI 5140 steel

TOTİK Y., Alsaran A., ÇELİK A., EFEOĞLU İ.

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.63, sa.5, ss.344-349, 2011 (SCI-Expanded)

Optimization of the coating parameters for micro-arc oxidation of Cp-Ti

VANGOLU Y., ARSLAN E., TOTİK Y., DEMİRCİ E., ALSARAN A.

Surface and Coatings Technology , cilt.205, sa.6, ss.1764-1773, 2010 (SCI-Expanded)

Effect of annealing on adhesion of TiB2 films deposited by pulsed magnetron sputtering

ARSLAN E., TOTİK Y., ÇELİK A., EFEOĞLU İ.

SURFACE ENGINEERING , cilt.26, sa.8, ss.567-570, 2010 (SCI-Expanded)

Investigation of the adhesion of NbN coatings deposited by pulsed dc reactive magnetron sputtering using scratch tests

Totik Y.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH , cilt.7, sa.4, ss.485-492, 2010 (SCI-Expanded)

Influence of Surface Roughness on Corrosion and Tribological Behavior of CP-Ti After Thermal Oxidation Treatment

ARSLAN E., TOTİK Y., DEMİRCİ E., ALSARAN A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.19, sa.3, ss.428-433, 2010 (SCI-Expanded)

High temperature friction and wear behavior of MoS(2)/Nb coating in ambient air

ARSLAN E., TOTİK Y., BAYRAK O. Ü., EFEOĞLU İ., ÇELİK A.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH , cilt.7, sa.1, ss.131-137, 2010 (SCI-Expanded)

High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation

ARSLAN E., TOTİK Y., DEMİRCİ E., Vangolu Y., ALSARAN A., EFEOĞLU İ.

Surface and Coatings Technology , cilt.204, ss.829-833, 2009 (SCI-Expanded)

The Fretting Fatigue of Commercial Hard Anodized Aluminum Alloy

SADELER R., ATASOY S., ARICI A. A., TOTİK Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.18, sa.9, ss.1280-1284, 2009 (SCI-Expanded)

CHARACTERIZATION OF TiB2 COATING ADHERENCE BY A MULTI-PASS SCRATCH TESTING

TOTİK Y., ARSLAN E., EFEOĞLU İ., Kaymaz I.

SURFACE REVIEW AND LETTERS , cilt.16, sa.3, ss.329-335, 2009 (SCI-Expanded)

Evaluation of adhesion and fatigue of MoS2-Nb solid-lubricant films deposited by pulsed-dc magnetron sputtering

ARSLAN E., BARAN O., EFEOĞLU İ., TOTİK Y.

SURFACE & COATINGS TECHNOLOGY , cilt.202, sa.11, ss.2344-2348, 2008 (SCI-Expanded)

The effect of substrate on the wear behaviour of Ni electroplating coatings

Totik Y.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.46, sa.5, ss.301-308, 2008 (SCI-Expanded)

The effect of manganese phosphate coating treatment on fretting fatigue strength of AISI 1045 steel

TOTİK Y., CAGLAROGLU A., SADELER R.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.45, sa.5, ss.275-281, 2007 (SCI-Expanded)

The corrosion behaviour of manganese phosphate coatings applied to AISI 4140 steel subjected to different heat treatments

Totik Y.

SURFACE & COATINGS TECHNOLOGY , cilt.200, sa.8, ss.2711-2717, 2006 (SCI-Expanded)

The effect of residual stresses induced by prestraining on fatigue life of notched specimens

SADELER R., OZEL A., Kaymaz L., TOTIK Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.14, sa.3, ss.351-355, 2005 (SCI-Expanded)

The corrosion behavior of AISI 4140 steel subjected to different heat treatments

Totik Y.

CORROSION REVIEWS , cilt.23, ss.379-390, 2005 (SCI-Expanded)

The effect of the microsructural difference between surface and center on the hot workability of AA 6063 homogenized ingot

TOTİK Y., GAVGALI M., SADELER R., Kaymaz I.

JOURNAL OF ADVANCED MATERIALS , cilt.36, sa.4, ss.53-59, 2004 (SCI-Expanded)

Improvements of fatigue behaviour in 2014 Al alloy by solution heat treating and age-hardening

SADELER R., TOTIK Y., GAVGALI M., Kaymaz I.

MATERIALS & DESIGN , cilt.25, sa.5, ss.439-445, 2004 (SCI-Expanded)

The effect of homogenisation treatment on cold deformations of AA 2014 and AA 6063 alloys

TOTIK Y., SADELER R., Kaymaz I., GAVGALI M.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.147, sa.1, ss.60-64, 2004 (SCI-Expanded)

The effects of artificial aging on wear properties of AA 6063 alloy

GAVGALI M., Totik Y., SADELER R.

MATERIALS LETTERS , cilt.57, ss.3713-3721, 2003 (SCI-Expanded)

The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions

Totik Y., SADELER R., ALTUN H., GAVGALI A.

MATERIALS & DESIGN , cilt.24, sa.1, ss.25-30, 2003 (SCI-Expanded)

The effect of homogenization treatment on the hot workability between the surface and the center of AA 2014 ingots

Totik Y., GAVGALI M.

MATERIALS CHARACTERIZATION , cilt.49, sa.3, ss.261-268, 2002 (SCI-Expanded)

The investigation of hot workability of AA 6063/SiC composites with different SiC particulate volume fraction

TOTIK Y., SADELER R., GAVGALI M., Kaymaz I.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.10, sa.4, ss.279-286, 2002 (SCI-Expanded)

Corrosion behavior of 90%Cu-10%Ni alloy at different rotation speeds

GAVGALI M., Kaymaz I., TOTIK Y., SADELER R.

CORROSION REVIEWS , cilt.20, ss.403-414, 2002 (SCI-Expanded)

An investigation of the relationship between heat treatment and microstructure in (TiAlV)N and (TiAl)N ceramic films

Totik Y., Efeoglu I., Gavgali M., Sadeler R.

MATERIALS CHARACTERIZATION , cilt.47, sa.1, ss.55-60, 2001 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Investigation of In-Vitro Properties of NiTi Alloy After Micro Arc Oxidation

ŞÜKÜROĞLU S., Totik Y., ŞÜKÜROĞLU E. E., Kucukosman R.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.24, sa.2, ss.373-382, 2021 (ESCI)

The Structural and Mechanical Properties of MoS2-TiB2 Coated on AA7075 Produced by Powder Metallurgy Method

Yılmaz T. A., Keles A., Lule Senoz G. M., Totik Y., Efeoglu İ.

Brilliant Engineering , cilt.1, sa.2, ss.21-24, 2020 (Hakemli Dergi)

Determining Optimum Parameters for Adhesion Properties of Ta-DLC Films Using Taguchi Experimental Design

Keleş A., Baran Ö., Urvasızoğlu G., Ataol M., Totik Y., Ertaş Ü., et al.

Brilliant Engineering , cilt.1, sa.1, ss.1-6, 2020 (Hakemli Dergi)

THE STRUCTURAL PROPERTIES OF Ta DOPED DLC COATINGS FOR THE DENTAL APPLICATIONS USING HiPIMS

EFEOĞLU İ., BARAN Ö., URVASIZOĞLU G., KELEŞ A., ATAOL M., TOTİK Y., et al.

Solid State Science and Technology , cilt.27, sa.1, ss.68-74, 2020 (Hakemli Dergi)

The Effect of Cu doping on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.13, sa.1, ss.181-189, 2020 (Hakemli Dergi)

Synthesis and investigation of structural-mechanical-tribological properties of c-BN based BN thin films

EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

Bor Dergisi , cilt.2, ss.11-17, 2017 (Hakemli Dergi)

İyon nitrürleme işleminin AISI 5140 çeliğinin burulma özellikleri üzerine etkisi

GAVGALI M., ÇELİK A., ALSARAN A., TOTİK Y.

Mühendis ve Makina , cilt.43, sa.507, ss.45-49, 2002 (Hakemli Dergi)

İyon Nitrürleme İşleminin AISI 5140 Çeliğinin Burulma Özelliklerine Etkisi Üzerine Bir Çalışma

GAVGALI M., ÇELİK A., ALSARAN A., TOTİK Y.

Mühendis ve Makina , cilt.43, sa.507, ss.45-49, 2002 (Hakemli Dergi)

Hot worability of 5052 alüminium alloys

GAVGALI M., TOTİK Y.

j. of The Mechanical Behviour of Materials , cilt.12, ss.187-195, 2001 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Effect of Nb and V Doped Elements on the Mechanical and Tribological Properties of CrYN Coatings

Gülten G., Yaylalı B., Efeoğlu İ., Totik Y., Kelly P., Kulczyk-Malecka J.

49th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, Amerika Birleşik Devletleri, 21 - 26 Mayıs 2023, ss.1-15, (Tam Metin Bildiri)

Influence of Nb and Ta on the corrosion and mechanical properties of CrYN coatings

Yaylalı B., Gülten G., Efeoğlu İ., Totik Y., Kelly P., Kulczyk-Malecka J.

49th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, Amerika Birleşik Devletleri, 21 - 26 Mayıs 2023, ss.1-15, (Tam Metin Bildiri)

Deposition of Nb Doped CrYN Thin Films: Investigation of Structural, Mechanical and Tribological Properties

Yuksel F., GÜLTEN G., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.251-257, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of LaB6 Thin Films Deposited by Closed-Field Unbalanced Magnetron Sputtering

GÜLTEN G., YEŞİLYURT M., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.245-250, (Tam Metin Bildiri)

Synthesis and Characterization of Ta/TaN Coatings with CFUBMS-HiPIMS Technology

Polat M. A., GÜLTEN G., TOTİK Y., Maleque M. A., Masjuki H. H., Çetin S. Y., et al.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.273-279, (Tam Metin Bildiri)

The Structural, Mechanical and Tribological Properties of LaB6 Thin Films Deposited by Closed-Field Unbalanced Magnetron Sputtering

GÜLTEN G., YEŞİLYURT M., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, (Tam Metin Bildiri)

AZ91 Mg ALAŞIMI ÜZERİNE MAO YÖNTEMİYLE BÜYÜTÜLEN MgO:TiO2 KAPLAMALARIN MİKROYAPISAL KARAKTERİZASYONU

ŞÜKÜROĞLU S., TOTİK Y., ŞÜKÜROĞLU E. E.

3. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 21 Kasım 2021, (Tam Metin Bildiri)

MAO YÖNTEMİYLE AZ91 MAGNEZYUM ALAŞIMI ÜZERİNE BÜYÜTÜLEN MgO, MgO:TiO2 ve MgO:TiO2:C NANOKOMPOZİT KAPLAMALARININ YÜZEY MORFOLOJİSİ VE BİLEŞİMİ ÜZERİNE ELEKTROLİTİK ÇÖZELTİNİN ETKİSİNİN İNCELENMESİ

ŞÜKÜROĞLU S., TOTİK Y., ŞÜKÜROĞLU E. E.

3. INTERNATIONAL SCIENCES AND INNOVATION CONGRESS, Ankara, Türkiye, 21 Kasım 2021, (Tam Metin Bildiri)

The Mechanical and Corrosion Properties of TaN Thin Films Coated on Ti6Al4V Using Pulsed-dc Magnetron Sputtering

Gülten G., Yılmaz T. A., Totik Y., Efeoğlu İ.

International Online Conferences on Engineering and Natural Sciences IOCENS'21, Gümüşhane, Türkiye, 05 Temmuz 2021, (Özet Bildiri)

Investigation of Hardness and Microstructural Properties of AA7075 Alloy by ECAP Method

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC 2019), 21 - 23 Haziran 2019, ss.1157-1159, (Tam Metin Bildiri)

EKAP Yöntemi ile C Rotası Kullanılarak AA7075 Alaşımının Mikroyapısal Özelliklerinin Araştırılması

Yılmaz T. A., Totik Y., Lule Senoz G. M., Efeoğlu İ.

The International Alumınıum-Themed Engineering and Natural Sciences Conference in Seydişehir/TURKEY (IATENS’19), Konya, Türkiye, 4 - 06 Ekim 2019, ss.544-546, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

The Effect of Graphite Particle Addition to Plasma Electrolytic Oxidation (PEO) Coatings on AZ91 Magnesium Alloy

KÜÇÜKOSMAN R., ŞÜKÜROĞLU S., ŞÜKÜROĞLU E. E., TOTİK Y.

International Conference on Advanced Engineering Technologies, 19 - 21 Eylül 2019, (Tam Metin Bildiri)

The Structural Properties of Ta Doped DLC coatings for the Dental Applications Using HiPIMS

EFEOĞLU İ., BARAN Ö., Urvasizoğlu G., KELEŞ A., ATAOL M., TOTİK Y., et al.

ISAMN2019 (3rd INTERNATIONALSYMPOSIUM on ADVANCED MATERIALS and NANOTECHNOLOGY), 19 - 20 Ağustos 2019, (Tam Metin Bildiri)

EKAP Yöntemi ile AA7075 Alaşımının Sertlik ve Mikroyapısal Özelliklerinin Araştırılması

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

Boron Based Coatings for Strategic Applications: Typical Research Results

EFEOĞLU İ., KELEŞ A., TOTİK Y.

ICANAS 2019 4th INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCES, 19 - 22 Haziran 2019, (Tam Metin Bildiri)

EKAP Yöntemi ile AA7075 Alaşımının Sertlik ve Mikroyapısal Özelliklerinin Araştırılması

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of Boron Based Films Grown by HiPIMS Under Different N2 Contents”,

KELEŞ A., EFEOĞLU İ., TOTİK Y.

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films, TownCountry Convention Center,San Diego,CA,USA, 19 - 24 Mayıs 2019, (Özet Bildiri)

Optimization for Adhesion Properties of c-BN Films Coated with HiPIMS,

EFEOĞLU İ., TOTİK Y., KELEŞ A.

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films TownCountry Convention Center,San Diego,CA,USA, 19 - 24 Mayıs 2019, (Özet Bildiri)

Influence Target Voltage on The Mechanical and Tribological Properties of c-BN Films Coated with HiPIMS

EFEOĞLU İ., TOTİK Y., KELEŞ A.

International Symposium on Boron (BORON2019) Nevşehir Hacı Bektaş Veli University, Nevşehir, Turkey, 17 - 19 Nisan 2019, (Tam Metin Bildiri)

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılması

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., BARAN Ö.

15.Uluslararası Korozyon Sempozyumu, 26 - 28 Eylül 2018, (Tam Metin Bildiri)

TİTANYUM ALAŞIMLARININ DLC KAPLAMA SONRASI TRİBOKOROZYON ÖZELLİKLERİNİN İNCELENMESİ

ŞÜKÜROĞLU S., ŞÜKÜROĞLU E. E., TOTİK Y., EFEOĞLU İ., ARMAĞAN A. N.

15. ULUSLARARASI KOROZYON SEMPOZYUMU, 26 - 28 Eylül 2018, (Tam Metin Bildiri)

Titanyum Alaşımlarının DLC Kaplama Sonrası Tribokorozyon Özelliklerinin Araştırılması

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 26 - 29 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Investigation of mechanical and tribological properties of BCN thin films

TOTİK Y., Gülten G., Efeoğlu İ., Keleş A., Ersoy K., Durkaya G.

SATF15, İzmir, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılmas

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ., Baran Ö.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Inverstigation of mechanical and tribological properties of BCN thin films

GÜLTEN G., EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

SATF 18, 17 - 21 Eylül 2018, (Tam Metin Bildiri)

The Adhesion Properties of c-BN Films Coated Using HiPIMS and Pulsed-dc Magnetron Sputtering

EFEOĞLU İ., TOTİK Y., KELEŞ A., GÜLTEN G., ERSOY K., DURKAYA G.

SATF, 17 - 21 Eylül 2018, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films”, he International Conference on Metallurgical Coatings and Thin Films

EFEOĞLU İ., ahmad A., KELEŞ A., BARAN Ö., TOTİK Y.

ICMCTF 2018, 23 - 27 Nisan 2018, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, (Özet Bildiri)

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFEOĞLU İ., Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.87, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material

Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.93, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material”, he International Conference on Metallurgical Coatings and Thin Films

ahmad A., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF 2018, 23 - 27 Nisan 2018, (Tam Metin Bildiri)

Toz Metalurji Yöntemi İle Üretilmiş AA7075 Taban Malzeme Üzerine KaplanmışMoS2-TiB2 Kompozit Filmin Yapısal Mekanik Ve Tribolojik Özelliklerin Araştırılması

YILMAZ T. A., LÜLE ŞENÖZ G. M., EFEOĞLU İ., TOTİK Y., KELEŞ A.

!.International Symposium on Light Alloys Composite Materials, 22 - 24 Mart 2018, (Tam Metin Bildiri)

Comparison of Functional Composite Thin Films Deposited by CFUBMS PVD Using Differantial Power Sources

EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018, (Tam Metin Bildiri)

Tribological Behaviour of Ti:Ta-DLC Films Under Different Tribo-Test Conditions

EFEOĞLU İ., KELEŞ A., TOTİK Y., Cicek H., Sukuroglu E. E.

9th International Conference on Tribology (Balkantrib), Türkiye, 13 - 15 Eylül 2017, cilt.295, (Tam Metin Bildiri)

Growth of Antibacterial Coatings by Plasma Electrolytic Oxidation

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., AYDIN K.

icadet, 21 - 23 Eylül 2017, (Özet Bildiri)

Plazma Elektrolitik Oksidasyon Yöntemiyle Antibakteriyel Kaplamaların Büyütülmesi

Şüküroğlu S., Şüküroğlu E., TOTİK Y., EFEOĞLU İ., Aydın K.

ICADET, II. Int. Conf. On Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 29 Eylül 2017, (Tam Metin Bildiri)

MAO Kaplı NiTi Şekil Hafızalı Alaşımların Sonlu Eleman Metodu ile Analizi

KARABUDAK F., YEŞİLDAL R., ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., ZAMANLOU H., ŞEN S., et al.

ICADET2017, 21 - 23 Eylül 2017, (Özet Bildiri)

In Vitro bioactivity of ceramic coatings on magnesium implant materials by PEO

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y.

BIOMED 2017 22nd International Biomedical Science and technology Symposium, 12 - 14 Mayıs 2017, (Tam Metin Bildiri)

Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels

KELEŞ A., ÇİÇEK H., BARAN Ö., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 Nisan 2017, (Özet Bildiri)

A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates

ÇİÇEK H., BARAN Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 Nisan 2017, (Özet Bildiri)

Compearing of adhesion properties of TiNbVN coatings deposited on differant sunbstrates

EFEOĞLU İ., TOTİK Y., Baran Ö., KELEŞ A., Çiçek H.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

A comparative study of fatique properties of TiVN and TiNbN thin films deposited on differant substrates

Çiçek H., Baran Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

The mechanical and tribological properties of Ti(Nb, V) N films on the 2024 Al-alloy

Baran Ö., KELEŞ A., Çiçek H., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Detemining of the critical loads of transition metal nitrides on steels

KELEŞ A., Çiçek H., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF16, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Bor Nitrür BN Esaslı İnce Film Kaplamalar ve Teknolojik Uygulamaları Üzerine Ar Ge Çalışması

EFEOĞLU İ., KELEŞ A., TOTİK Y., ÇİÇEK H.

2.Aselsan Malzeme Çalıştayı, Türkiye, 15 Kasım 2016, (Tam Metin Bildiri)

c Bn based BN Thin Film Synthesis and Investigation The Structural Mechanical Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A.

ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Friction and Wear Characteristics of Me DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., ŞÜKÜROĞLU E. E., EZİRMİK K. V.

ICMTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Investigation of In Vitro Properties NiTi After MAO Coatings

ŞÜKÜROĞLU S., TOTİK Y., ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ.

. ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Fetigue and Adhesion Properties of Martenzite and Austinite Phases of TiNi Shape Memory Thin Film Deposited by Magnetron Sputtering

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V.

ICMCTF, 25 Mayıs 2016, (Tam Metin Bildiri)

Investigation of adhesionfetigue properties of Micro Arc Oxidation Coatings on AZ91 Magnesium Alloys

ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ., TOTİK Y.

ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

nvestigation of Adhesion and Fatigue Properties of Micro Arc Oxidation Coatings on AZ91 Magnesium Alloys

ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ., TOTİK Y., ŞÜKÜROĞLU S.

ICTMCF 2016, 25 - 28 Nisan 2016

The Investigation Of Corrosion Behavior Of Az91 Magnesium Coated With Micro Arc Oxidation Mao Method

Yuca M., ŞÜKÜROĞLU E. E., GAVGALI M., GAVGALI E., ŞÜKÜROĞLU S., TOTİK Y., et al.

ICMCTF 2016, 25 - 28 Nisan 2016