Yayınlar

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Tribocorrosion properties of plasma nitrided, Ti-DLC coated and duplex surface treated AISI 316L stainless steel

Uzun Y.
SURFACE AND COATINGS TECHNOLOGY, cilt.441, ss.1-9, 2022 (SCI-Expanded) identifier identifier

Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel

BOZKURT Y. B., KOVACI H., Yetim A., ÇELİK A.
Surface and Coatings Technology, cilt.440, 2022 (SCI-Expanded) identifier identifier

Effect of working pressure and post-annealing on structural, optical and electrical properties of p-type NiO thin films produced by RF magnetron sputtering technique

Senaslan F., Tasdemir M., ÇELİK A.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, cilt.127, sa.10, 2021 (SCI-Expanded) identifier identifier

Experimental and Numerical Investigation of Mechanical Properties of Different Lattice Structures Manufactured from Medical Titanium Alloy by Using Laser Beam-Powder Bed Fusion

Hacisalihoglu I., Yildiz F., ÇELİK A.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, cilt.30, sa.7, ss.5466-5476, 2021 (SCI-Expanded) identifier identifier

The effects of boriding on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting

UZUN Y., YANIKOĞLU N., KOVACI H., Yetim A. F., ÇELİK A.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, cilt.35, sa.14, ss.1576-1591, 2021 (SCI-Expanded) identifier identifier

Wear, Corrosion and Tribocorrosion Behavior of Polyurethane and Polyvinylpyrrolidone Blends as Coating for Corrosion Protection of AISI 316L Stainless Steel

Tasdemir M., Senaslan F., Celik A.
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, cilt.16, sa.5, 2021 (SCI-Expanded) identifier identifier

Improvements in the static/dynamic strength of porcelain fused to metal dental crowns with surface protrusions produced by selective laser melting

Taftali M., Turalioglu K., YETİM A. F., UZUN Y., AKPINAR S., YILDIZ F.
JOURNAL OF MANUFACTURING PROCESSES, cilt.65, ss.112-118, 2021 (SCI-Expanded) identifier identifier

Investigation of corrosion and thermal behavior of PU-PDMS-coated AISI 316L

Tasdemir M., Senaslan F., ÇELİK A.
E-POLYMERS, cilt.21, sa.1, ss.355-365, 2021 (SCI-Expanded) identifier identifier

The effects of build orientation and hatch spacing on mechanical properties of medical Ti-6Al-4V alloy manufactured by selective laser melting

Hacisalihoglu I., YILDIZ F., ÇELİK A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.802, 2021 (SCI-Expanded) identifier identifier

Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding

KOVACI H., SEÇER Y.
Surface and Coatings Technology, cilt.400, 2020 (SCI-Expanded) identifier identifier

Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films

Çelik A., Acar M. T., Yetim T., Kovacı H., Yetim A.
TRIBOLOGY INTERNATIONAL, cilt.146, 2020 (SCI-Expanded) identifier identifier

Comparison of the microstructural, mechanical and wear properties of plasma oxidized Cp-Ti prepared by laser powder bed fusion additive manufacturing and forging processes

Kovacı H.
SURFACE & COATINGS TECHNOLOGY, cilt.374, ss.987-996, 2019 (SCI-Expanded) identifier identifier

Biomechanical analysis of spinal implants with different rod diameters under static and fatigue loads: an experimental study

Kovacı H., Yetim A. F., Çelik A.
BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, cilt.64, ss.339-346, 2019 (SCI-Expanded) identifier identifier identifier

Effect of gas mixture on tribological performance of plasma nitrided grey cast iron under dry and lubricated conditions

Comakli O., Yetim A. F., Karaca B., Celik A.
MATERIALS RESEARCH EXPRESS, cilt.6, sa.5, 2019 (SCI-Expanded) identifier identifier

Effect of boronizing on the structural, mechanical and tribological properties of CoCrW dental alloy produced by selective laser melting

Uzun Y., Kovacı H., Yetim A. F., Çelik A.
Industrial Lubrication and Tribology, cilt.71, sa.3, ss.348-356, 2019 (SCI-Expanded) identifier identifier

The effect of surface plastic deformation produced by shot peening on corrosion behavior of a low-alloy steel

Kovacı H., Bozkurt Y. B., Yetim A., Aslan M., Çelik A.
SURFACE & COATINGS TECHNOLOGY, cilt.360, ss.78-86, 2019 (SCI-Expanded) identifier identifier

Effects of shot peening pre-treatment and plasma nitriding parameters on, the structural, mechanical and tribological properties of AISI 4140 low-alloy steel

Kovacı H., Hacısalihoglu I., Yetim A. F., Çelik A.
SURFACE & COATINGS TECHNOLOGY, cilt.358, ss.256-265, 2019 (SCI-Expanded) identifier identifier

The effect of plasma oxidation and nitridation on corrosion behavior of CoCrMo alloy in SBF solution

Aslan M., Comakli O., Yazici M., Yetim A. F., Bayrak O., Celik A.
Surface Review and Letters, cilt.25, sa.8, 2018 (SCI-Expanded) identifier identifier

Tribological and electrochemical properties of TiO2 films produced on Cp-Ti by sol-gel and SILAR in bio-simulated environment

Çomaklı O., Yazıcı M., KOVACI H., Yetim T., Yetim A., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.352, ss.513-521, 2018 (SCI-Expanded) identifier identifier

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions

Kovacı H., Baran Ö., Yetim A. F., Bozkurt Y. B., Kara L., Çelik A.
SURFACE & COATINGS TECHNOLOGY, cilt.349, ss.969-979, 2018 (SCI-Expanded) identifier identifier

Structural, mechanical and tribological properties of Ti and TiN coatings on 316L stainless steel

Yazıcı M., KOVACI H., Yetim A., ÇELİK A.
CERAMICS INTERNATIONAL, cilt.44, sa.12, ss.14195-14201, 2018 (SCI-Expanded) identifier identifier

Effect of Nitrogen Amount on Tribological Behavior of Plasma Nitrided 31CrMoV9 Steel

ÇOMAKLI O., YETİM A. F., KARACA B., ÇELİK A.
Surface Review And Letters, 2018 (SCI-Expanded)

Investigation of the usage possibility of CuO and CuS thin films produced by successive ionic layer adsorption and reaction (SILAR) as solid lubricant

KOVACI H., AKALTUN Y., Yetim A. F., Uzun Y., ÇELİK A.
Surface and Coatings Technology, cilt.344, ss.522-527, 2018 (SCI-Expanded) identifier identifier

Effect of Ti amount on wear and corrosion properties of Ti-doped Al2O3 nanocomposite ceramic coated CP titanium implant material

Çomaklı O., Yazıcı M., Yetim T., Yetim A., ÇELİK A.
Ceramics International, cilt.44, sa.7, ss.7421-7428, 2018 (SCI-Expanded) identifier identifier

Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions

KOVACI H., Yetim A. F., BARAN Ö., ÇELİK A.
Ceramics International, cilt.44, sa.6, ss.7151-7158, 2018 (SCI-Expanded) identifier identifier

Tribocorrosion behavior of plasma nitrided Hardox steels in NaCl solution

Hacısalihoğlu İ., Yıldız F., ÇELİK A.
Tribology International, cilt.120, ss.434-445, 2018 (SCI-Expanded) identifier identifier

TRIBOLOGICAL PROPERTIES OF TiO2/SiO2 DOUBLE LAYER COATINGS DEPOSITED ON CP-Ti

ÇOMAKLI Ö., Yazici M., Yetim T., Yetim A. F., ÇELİK A.
SURFACE REVIEW AND LETTERS, cilt.24, sa.6, 2017 (SCI-Expanded) identifier identifier

The Effects of Aging Time on the Structural and Electrochemical Properties of Composite Coatings on CP-Ti Substrate

Çomakli O., Yazici M., Yetim T., Yetim A. F., ÇELİK A.
Journal of Bionic Engineering, cilt.14, sa.3, ss.532-539, 2017 (SCI-Expanded) identifier identifier

DRY SLIDING WEAR CHARACTERISTICS OF PLASMA-NITROCARBURIZED Co - Cr - Mo ALLOY

BAYRAK Ö., KOVACI H., Yildiz F., Yetim A. F., ÇELİK A.
METAL SCIENCE AND HEAT TREATMENT, cilt.58, sa.11-12, ss.742-747, 2017 (SCI-Expanded) identifier identifier

A NOVEL METHOD FOR IMPROVING PLASMA NITRIDING EFFICIENCY: PRE-MAGNETIZATION BY DC MAGNETIC FIELD

KOVACI H., Yetim A. F., BOZKURT Y. B., ÇELİK A.
SURFACE REVIEW AND LETTERS, cilt.24, sa.1, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Influence of plasma nitriding treatment on the adhesion of DLC films deposited on AISI 4140 steel by PVD magnetron sputtering

KOVACI H., BARAN Ö., BAYRAK Ö., Yetim A. F., ÇELİK A.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, cilt.31, sa.18, ss.2015-2027, 2017 (SCI-Expanded) identifier identifier

Effect of sol aging time on the wear properties of TiO2-SiO2 composite films prepared by a sol-gel method

Yazici M., ÇOMAKLI Ö., Yetim T., Yetim A. F., ÇELİK A.
TRIBOLOGY INTERNATIONAL, cilt.104, ss.175-182, 2016 (SCI-Expanded) identifier identifier

Effect of Plasma Nitriding Parameters on the Wear Resistance of Alloy Inconel 718

KOVACI H., GHAHRAMANZADEH H. A. S. L., ALBAYRAK Ç., Alsaran A., ÇELİK A.
METAL SCIENCE AND HEAT TREATMENT, cilt.58, ss.470-474, 2016 (SCI-Expanded) identifier identifier

Fatigue crack growth behavior of DLC coated AISI 4140 steel under constant and variable amplitude loading conditions

KOVACI H., Yetim A. F., BARAN Ö., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.304, ss.316-324, 2016 (SCI-Expanded) identifier identifier

Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 2-Variable amplitude loading and load interactions

KOVACI H., Yetim A. F., BARAN Ö., ÇELİK A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.672, ss.265-275, 2016 (SCI-Expanded) identifier identifier

Fatigue crack growth analysis of plasma nitrided AISI 4140 low-alloy steel: Part 1-constant amplitude loading

KOVACI H., Yetim A. F., BARAN Ö., ÇELİK A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.672, ss.257-264, 2016 (SCI-Expanded) identifier identifier

The effect of wettability on corrosion resistance of oxide films produced by SILAR method on magnesium, aluminum and copper substrates

AKALTUN Y., Aslan M., Yetim T., Cayir T., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.292, ss.121-131, 2016 (SCI-Expanded) identifier identifier

The effect of calcination temperatures on structural and electrochemical properties of TiO2 film deposited on commercial pure titanium

ÇOMAKLI Ö., Yazici M., Yetim T., Yetim A. F., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.285, ss.298-303, 2016 (SCI-Expanded) identifier identifier

The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field

Yetim A. F., KOVACI H., Yildiz F., BAYRAK Ö., ÇELİK A.
WEAR, cilt.332, ss.988-994, 2015 (SCI-Expanded) identifier identifier

Numerical investigation of mechanical effects caused by various fixation positions on a new radius intramedullary nail

ÇELİK A., KOVACI H., SAKA G., Kaymaz I.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, cilt.18, sa.3, ss.316-324, 2015 (SCI-Expanded) identifier identifier identifier

The effect of plasma nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316 L stainless steel implant material in SBF solution

YAZICI M., Comakli O., Yetim T., Yetim A. F., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.261, ss.181-188, 2015 (SCI-Expanded) identifier identifier

Tibia kırıklarında kullanılan kilitli ve kilitsiz plak fiksasyon sistemlerinin sonlu elemanlar yöntemiyle incelenmesi

GHAHRAMANZADEH H. A. S. L., KOVACI H., ALSARAN A., KAYMAZ İ., ÇELİK A., YILDIRIM Ö. S.
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.18, ss.167-174, 2014 (SCI-Expanded)

Dental implant uygulamalarında ultra-ince tane yapılı titanyumun kullanılabilirliğinin araştırılması

Hacısalihoğlu İ., KOVACI H., Pürçek G., ALSARAN A.
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.18, ss.67-76, 2014 (SCI-Expanded)

Combined Effects of Different Overload Ratios and Nitriding Process on Fatigue Crack Growth of AISI 4140 Steel

Sengul A. B., ÇELİK A.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, cilt.21, sa.8, ss.797-803, 2014 (SCI-Expanded) identifier identifier

The effect of calcination temperatures on wear properties of TiO2 coated CP-Ti

Comakli O., Yetim T., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.246, ss.34-39, 2014 (SCI-Expanded) identifier identifier

Wear Behavior of Plasma Oxidized CoCrMo Alloy under Dry and Simulated Body Fluid Conditions

ÇELİK A., Aslan M., Yetim A. F., BAYRAK O.
JOURNAL OF BIONIC ENGINEERING, cilt.11, sa.2, ss.303-310, 2014 (SCI-Expanded) identifier identifier

Performance of Plasma Sprayed Al2O3 Coating in Bio-Simulated Environment

Yildiz F., Yetim A. F., ALSARAN A., ÇELİK A.
METAL SCIENCE AND HEAT TREATMENT, cilt.55, ss.504-508, 2014 (SCI-Expanded) identifier identifier

New interlocking intramedullary radius and ulna nails for treating forearm diaphyseal fractures in adults: A retrospective study

SAKA G., SAGLAM N., KURTULMUS T., AVCI C. C., Akpinar F., KOVACI H., et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, cilt.45, 2014 (SCI-Expanded) identifier identifier identifier

Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TiAlN thin film

Yildiz F., Yetim A. F., ALSARAN A., ÇELİK A., Kaymaz I., EFEOĞLU İ.
TRIBOLOGY INTERNATIONAL, cilt.66, ss.307-314, 2013 (SCI-Expanded) identifier identifier

The effect of magnetic field on the wear properties of a ferromagnetic steel

Yetim A. F., Kovacı H., Aslan M., Çelik A.
WEAR, cilt.301, ss.636-640, 2013 (SCI-Expanded) identifier identifier

FATIGUECRACKGROWTH RETARDATION BY THE NUMBER OFDIFFERENT CYCLES OVER LOADING ON EFFECT OF PLASMA NITRIDING

SENGUL A. B., ÇELİK A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, cilt.27, sa.4, ss.707-715, 2012 (SCI-Expanded) identifier identifier

Radius kırıklarında plak fiksasyonu ve intramedüller çivileme yöntemlerinin teorik olarak incelenmesi

Kovacı H., Ghahramanzadeh H. A. S. L., Kaymaz İ., Alsaran A., Çelik A., Saka G.
Annals Of Statistics, cilt.16, sa.3, ss.330-336, 2012 (SCI-Expanded)

Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel: Experiments and finite element analysis

Yildiz F., YETİM A., ALSARAN A., ÇELİK A., Kaymaz I.
TRIBOLOGY INTERNATIONAL, cilt.44, sa.12, ss.1979-1986, 2011 (SCI-Expanded) identifier identifier

Effect of plasma nitriding on fatigue crack growth on AISI 4140 steel under variable amplitude loading

SENGUL A. B., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.205, ss.5172-5177, 2011 (SCI-Expanded) identifier identifier

Corrosion behaviour of Ti DLC deposition on prenitrided 316L stainless steel and Ti-6Al-4V alloy

YETİM A., ALSARAN A., ÇELİK A., EFEOĞLU İ.
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, cilt.46, sa.4, ss.439-444, 2011 (SCI-Expanded) identifier identifier

Investigation of the pull-out strengths of Ti6Al4V cortical screws oxidized with various methods

Vangölü S. Y., Bayrak Ö., Kovacı H., Yıldırım Ö. S., Alsaran A., Çelik A.
Journal of Biomechanics, cilt.44, ss.5, 2011 (SCI-Expanded)

Multipass scratch test behaviour of TiAlN thin film deposited on 316L stainless steel and Ti6Al4V alloy with dc biased and pulsed magnetron sputtering

YILDIZ F., ALSARAN A., ÇELİK A., EFEOĞLU İ.
SURFACE ENGINEERING, cilt.26, sa.8, ss.578-583, 2010 (SCI-Expanded) identifier identifier

Improving tribological properties of Ti6Al4V alloy with duplex surface treatment

YETİM A., ÇELİK A., ALSARAN A.
SURFACE & COATINGS TECHNOLOGY, cilt.205, sa.2, ss.320-324, 2010 (SCI-Expanded) identifier identifier

Fatigue life determination of plasma nitrided medical grade CoCrMo alloy

BAYRAK O. Ü., YETİM A., ALSARAN A., ÇELİK A.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, cilt.33, sa.5, ss.303-309, 2010 (SCI-Expanded) identifier identifier

Investigation of tribological and electrochemical properties of dual layer after low temperature plasma carbo-nitriding

YETİM A., ALSARAN A., ÇELİK A.
SURFACE ENGINEERING, cilt.26, sa.3, ss.178-184, 2010 (SCI-Expanded) identifier identifier

Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy

ÇELİK A., BAYRAK O. Ü., ALSARAN A., Kaymaz I., YETİM A.
SURFACE & COATINGS TECHNOLOGY, cilt.202, sa.11, ss.2433-2438, 2008 (SCI-Expanded) identifier identifier

Plasma nitriding behavior of Ti6Al4V orthopedic alloy

YILDIZ F., YETİM A., ALSARAN A., ÇELİK A.
SURFACE & COATINGS TECHNOLOGY, cilt.202, sa.11, ss.2471-2476, 2008 (SCI-Expanded) identifier identifier

Surface modification of 316L stainless steel with plasma nitriding

YETİM A., YILDIZ F., ALSARAN A., ÇELİK A.
KOVOVE MATERIALY-METALLIC MATERIALS, cilt.46, sa.2, ss.105-116, 2008 (SCI-Expanded) identifier identifier

Fatigue behaviour of duplex treated AISI 316L stainless steel

Celik A., ARSLAN Y., YETIM A. F., Efeoglu I.
KOVOVE MATERIALY-METALLIC MATERIALS, cilt.45, sa.1, ss.35-40, 2007 (SCI-Expanded) identifier identifier

Effects of post-aging on wear and corrosion properties of nitrided AISI 4140 steel

ALSARAN A., YILDIZ F., Celik A.
SURFACE & COATINGS TECHNOLOGY, cilt.201, sa.6, ss.3147-3154, 2006 (SCI-Expanded) identifier identifier

The investigation of structural, mechanical and tribological properties of plasma nitrocarburized AISI 1020 steel

Celik A., Karakan M., ALSARAN A., Efeoglu I.
SURFACE & COATINGS TECHNOLOGY, cilt.200, ss.1926-1932, 2005 (SCI-Expanded) identifier identifier

Effect of magnetic treatment on fatigue life of AISI 4140 steel

Celik A., YETIM A., ALSARAN A., Karakan M.
MATERIALS & DESIGN, cilt.26, sa.8, ss.700-704, 2005 (SCI-Expanded) identifier identifier

Structural, mechanical and tribological properties of duplex-treated AISI 5140 steel

ALSARAN A., Celik A., Karakan M.
MATERIALS CHARACTERIZATION, cilt.54, sa.1, ss.85-92, 2005 (SCI-Expanded) identifier identifier

A repair process for fatigue damage using plasma nitriding

ALSARAN A., Kaymaz I., Celik A., YETIM F., Karakan M.
SURFACE & COATINGS TECHNOLOGY, cilt.186, sa.3, ss.333-338, 2004 (SCI-Expanded) identifier identifier

Optimization of coating parameters for duplex treated AISI 5140 steel

ALSARAN A., Celik A., CELIK C., Efeoglu I.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, cilt.371, ss.141-148, 2004 (SCI-Expanded) identifier identifier

Determination of the optimum conditions for ion nitriding of AISI 5140 steel

ALSARAN A., Celik A., CELIK C.
SURFACE & COATINGS TECHNOLOGY, cilt.160, ss.219-226, 2002 (SCI-Expanded) identifier identifier

Structural characterization of ion-nitrided AISI 5140 low-alloy steel

ALSARAN A., Celik A.
MATERIALS CHARACTERIZATION, cilt.47, ss.207-213, 2001 (SCI-Expanded) identifier identifier

Microstructure and structural behavior of ion-nitrided AISI 8620 steel

Celik A., Efeoglu I., SAKAR G.
MATERIALS CHARACTERIZATION, cilt.46, sa.1, ss.39-44, 2001 (SCI-Expanded) identifier identifier

Mechanical and structural properties of similar and dissimilar steel joints

Celik A., ALSARAN A.
MATERIALS CHARACTERIZATION, cilt.43, sa.5, ss.311-318, 1999 (SCI-Expanded) identifier identifier

Investigation of compound layer formed during ion nitriding of AISI 4140 steel

Celik A., KARADENIZ S.
SURFACE & COATINGS TECHNOLOGY, cilt.80, sa.3, ss.283-286, 1996 (SCI-Expanded) identifier identifier

IMPROVEMENT OF THE FATIGUE-STRENGTH OF AISI-4140 STEEL BY AN ION NITRIDING PROCESS

CELIK A., KARADENIZ S.
SURFACE & COATINGS TECHNOLOGY, cilt.72, sa.3, ss.169-173, 1995 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Effects of Boriding, Nitrocarburizing, Nitriding and Post-oxidation Treatments on The Tribological Properties of DIN 32CrMoV12-10 Steel

ÇEP H., KOVACI H., ÇİMENOĞLU H., ÇELİK A.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.14, sa.3, ss.936-949, 2021 (Hakemli Dergi) identifier

The effect of wear mechanısm for plasma oxidized Cp-Ti and its alloys on tribocorrosion performance

SEÇER Y., BOZKURT Y. B., KOVACI H., YETİM A. F., ÇELİK A.
Selçuk-Teknik Dergisi, ss.28-38, 2020 (Hakemli Dergi)

Ti45Nb Alaşımının Aşınma Davranışına Anodizasyon Potansiyelinin Etkisi

TAŞDEMİR M., ŞENASLAN F., ÇELİK A.
Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.10, sa.2, ss.395-403, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

İntramedüller Çivilerin Statik ve Dinamik Eğilme Özelliklerinin Deneysel ve Teorik Olarak İncelenmesi

Kovacı H.
Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, cilt.12, ss.595-606, 2019 (Hakemli Dergi)

PLAZMA İLE OKSİTLENMİŞ CoCrMo ALAŞIMININ SBF İÇERİSİNDE ELEKTROKİMYASAL VE YARI İLETKENLİK ÖZELLİKLERİNİN ARAŞTIRILMASI

ÇELİK A., YETIM T., ASLAN M., BAYRAK O. Ü., Gör M.
Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi, cilt.2, ss.159-166, 2014 (Hakemli Dergi)

Çene kırıklarında kullanılan mini plakların yerleştirilmesinin simülasyonu ve gerilme analizi

GHAHRAMANZADEH H. A. S. L., KOVACI H., KAYMAZ İ., ALSARAN A., ÇELİK A., Akaş İ.
TMMOB MMO Mühendis ve Makina Dergisi, cilt.53, sa.628, ss.44-49, 2012 (Hakemli Dergi)

Çene Kırıklarında Kullanılan Mini Plakların Yerleştirilmesinin Simülasyonu ve Gerilme Analizi

Kahramanzade H., Kovacı H., Kaymaz İ., Alsaran A., Çelik A., Akaş İ.
TMMOB MMO Mühendis ve Makina, cilt.53, sa.628, ss.44-49, 2012 (Hakemsiz Dergi)

PLASMA ASSISTED THERMOCHEMICAL TREATMENTS

ÇELİK A., Alsaran A., KARAKAN M.
THERMOCHEMISTRY AND ADVANCES IN CHEMISTRY RESEARCH, ss.127-158, 2009 (Hakemli Dergi) identifier

İyon Nitrürleme İşleminin AISI 5140 Çeliğinin Burulma Özelliklerine Etkisi Üzerine Bir Çalışma

GAVGALI M., ÇELİK A., ALSARAN A., TOTİK Y.
Mühendis ve Makina, cilt.43, sa.507, ss.45-49, 2002 (Hakemli Dergi)

Farklı Metallerin Kaynağında Gerilme Yığılmalarının incelenmesi

ÇELİK A., Özel A., KARADENIZ S.
Mühendislik Bilimleri Dergisi, cilt.2, sa.4, ss.55-60, 1996 (Hakemli Dergi)

İyon İmplantasyon Yüzey Sertleştirme işlemi

ÇELİK A., KARADENIZ S.
Mühendis ve Makina, cilt.35, ss.412-415, 1995 (Hakemli Dergi)

Hakemli Kongre/Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Multi-pass Scratch Test of DLC Coatings Deposited by CFUBMS on Anodised-CP-Ti at the Different Temperatures and Potentials

Albayrak C., Baran Ö., ALSARAN A., EFEOĞLU İ., ÇELİK A.
ICMCTF2010, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 26 - 30 Nisan 2010, ss.1

The effects of boriding on the cytotoxicity of CoCrW dental crowns

UZUN Y., KOVACI H., YETİM A. F., TAGHIZADEHGHALEHJOUGHI A., ÇELİK A.
International Symposium on Boron, 17 - 19 Nisan 2019

Effects of connector placement on the biomechanical performance of spinal implants under tension and compression loads

TURALIOĞLU K., TAFTALI M., YETİM A. F., KOVACI H., ÇELİK A.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021

Plazma Nitrokarbürleme Sonrasi Yüzey Topografyasindaki Değişimlerin Araştirilmasi

KARAKAN M., BÜLBÜL F., YETİM A. F., ÇELİK A.
11. Uluslararası Denizli Malzeme Sempozyumu, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.996-1001

AISI 316L Paslanmaz Çeliğinin Plazma ile Nitrürasyon Davranişi

YETİM A. F., KARAKAN M., ALSARAN A., ÇELİK A., EFEOĞLU İ.
11. Uluslararası Denizli Malzeme Sempozyumu, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.349-353

The biomechanical analysis for biodegradable pure magnesium bone screws under three point bending and torsional test

ATİK B., BOZKURT Y. B., SEÇER Y., UZUN Y., KOVACI H., ÇELİK A.
9th International Conference on Advanced Technologies, İstanbul, Türkiye, 10 - 12 Ağustos 2020

The wear behaviour of manganese phosphate coatings applied on the plasma nitrided AISI 5140 steel

TOTİK Y., ALSARAN A., ÇELİK A., EFEOĞLU İ.
E-MRS Spring Meeting, Starsborg, Fransa, 20 Mayıs - 01 Haziran 2007, ss.1

TiN seramik filmlerin yapısal ve oksidasyon özellikleri

EFEOĞLU İ., GAVGALI M., ÇELİK A., EZİRMİK K. V.
Makina-İmalat Teknolojileri Sempozyumu, Konya, Türkiye, 19 - 21 Ekim 1999, ss.118-124

UV Işınlarıyla Sertleştirilerek Kaplanmış Hidrofobik ve OleofobikKaplamaların Korozyon Davranışı

ASLAN M., YETİM T., YETİM A. F., ÇELİK A.
2nd International Conference on Advanced Engineering Technologies (ICADET), 21 - 23 Eylül 2017

The Effects of Aging Time on the Structural and Electrochemical Properties of Sol GelPrepared Composite Coatings on CP Ti

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
IPCAP 2016, 25 - 27 Şubat 2016

Tribological properties of SiO2 TiO2multilayer TiO2 SiO2 coatings deposited onCP Ti implant material in simulated bodyfluid SBF solution

YAZICI M., ÇOMAKLI O., YETİM T., YETİM A. F., ÇELİK A.
ICABEE 2016, 18 Ağustos - 19 Eylül 2016

M2 takım çeliği üzerine PVD ile kaplanmış nitrür seramik filmlerin korozyon özellikleri

GAVGALI M., EFEOĞLU İ., ÇELİK A., EZİRMİK K. V.
Bilim Günleri, Denizli, Türkiye, 5 - 07 Mayıs 1999, ss.698-704

The effect of different texture density and plasma oxidation on tribological and mechanical properties of 316L fabricated by selective laser melting

SEÇER Y., KOVACI H.
5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Türkiye, 17 - 19 Aralık 2019

Corrosion performance and semiconductor properties of SiO2/TiO2 multilayer, TiO2, SiO2 coatings deposited on Cp-Ti Implant material

Yazıcı M., ÇOMAKLI O., Yetim T., KOVACI H., YETIM A. F., ÇELİK A.
14th International Corrosion Symposium-KORSEM16, Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.203-209

Corrosion behaviour of dublex DLC treated 316L stainless steel and Ti6Al4V alloy using as implanted materials

Yetim F., ALSARAN A., ÇELİK A., EFEOĞLU İ.
E-MRS Spring Meeting, Strasbourg, Fransa, 26 - 30 Mayıs 2008, ss.1

Çene kırıklarında kullanılan mini plakların koyun çenesi üzerinde yerleştirilmesinin simülasyonu ve FEM ile gerilme analizi

GHAHRAMANZADEH H. A. S. L., KOVACI H., KAYMAZ İ., ALSARAN A., ÇELİK A., Akaş İ.
IV. Ulusal Tıbbi Cihazlar İmalat Sanayi Kongre ve Sergisi, Samsun, Türkiye, 23 - 24 Eylül 2011, ss.39-45

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions

KOVACI H., BARAN O., YETIM A. F., BOZKURT Y. B., Kara L., ÇELİK A.
45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.160

An experimental study of erosion corrosion behavior for passive metals

BOZKURT Y. B., SEÇER Y., ATİK B., KOVACI H., YETİM A. F., ÇELİK A.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021

Investigation of tribocorrosion behavior of 316L coated H-BN with electrophoretic deposition technique

BOZKURT Y. B., ATİK B., KOVACI H., YETİM A. F., ÇELİK A.
9th International Conference on Advanced Technologies, İstanbul, Türkiye, 10 - 12 Ağustos 2020

A COMPARATIVE ANALYSIS OF WELD SEWING OF ST37 STEEL THAT WAS WELDED BY CONVENTIONAL AND SYNERGIC MACHINES

UZUN Y., ÇELİK A., YETİM A. F.
ICWET 16 4. ULUSLAR ARASI KAYNAK TEKNOLOJİLERİ KONFERANSI VE SERGİSİ, 11 - 13 Mayıs 2016

Comparison of electrochemical corrosion performances using variable scan rates on surfaces with different layer thicknesses

BOZKURT Y. B., ATİK B., KOVACI H., YETİM T., ÇELİK A.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021

Mechanical and tribological properties of graded Ti(BN-MoS2) based PVD coatings

EFEOĞLU İ., ÇELİK A., ALSARAN A., KAYMAZ İ., Yetim F.
ICMCTF09, 36th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 27 Nisan - 01 Mayıs 2009, ss.1

The corrosion resistance of Ag2O/ZnO/NiO nanocomposite film coated Cp-Ti

YETİM T., ÇOMAKLI O., YAZICI M., YETİM A. F., ÇELİK A.
20th International Conference on Composite Structures (ICCS20), 4 - 07 Eylül 2017

Analysis of forging process in bone plate production

GHAHRAMANZADEH H. A. S. L., KOVACI H., ALSARAN A., KAYMAZ İ., ÇELİK A.
2nd International Scientific Conference on Engineering, Antalya, Türkiye, 22 - 24 Kasım 2012, ss.305-310

Improving static properties and fatigue life of metallic bone plates made of Ti6Al4V alloy using plasma nitriding

KOVACI H.
1st International Conference on Advances in Mechanical and Mechatronics Engineering (ICAMMEN 2018), Ankara, Türkiye, 8 - 09 Kasım 2018, ss.155

Konvansiyonel ve Sinerjik Kaynak Makinaları İle Kaynak Edilmiş ST 37 Çeliğin Kaynak Dikişlerinin İncelenmesi

UZUN Y., YETİM A. F., ÇELİK A.
4.Uluslararası Kaynak Teknolojileri Konferansı ve Sergileri, 11 Mayıs 2016

The electrochemical behaviour of Cp-Ti coated by Ti-doped Al2O3 and Ni-doped Al2O3

TEKDİR H., TAFTALI M., TURALIOĞLU K., ÇOMAKLI O., YETİM T., YETİM A. F., et al.
1st International Conference on Advances in Engineering, Architecture, Science and Technology, Erzurum, Türkiye, 15 - 17 Aralık 2021

Synthesis and characterization of plasma polymerized polyaniline thin films on Ti6Al4V alloy

YILDIZ M., BAYRAM Ö., KOVACI H., ÇELİK A.
5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Türkiye, 17 - 19 Aralık 2019

Study of corrosion and mechanical properties of welding with massive and flux cored wire in conventional and pulsed gas metal arc welding

UZUN Y., KOVACI H., YETİM A. F., ÇELİK A.
4. International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019

Experimental investigation of the biomechanical performance of rigid and dynamic spinal rod designs

KOVACI H.
International 9th Biomechanics Conference, Eskişehir, Türkiye, 19 - 22 Eylül 2018, ss.17

Investigation of tribological performance of Ni-Doped Al2O3 film coated Cp-Ti

TURALIOĞLU K., TEKDİR H., Taftalı M., YETİM T., KOVACI H., YETİM A. F.
27th Annual International Conference on Composites or Nano Engineering (ICCE-27), Granada, Nikaragua, 14 - 20 Temmuz 2019

Investigation of the friction and wear behavior of DLC films and duplex plasma nitriding/DLC coatings under different sliding conditions

KOVACI H., YETIM A. F., BARAN O., ÇELİK A.
20th International Conference on Composite Structures (ICCS20), Paris, Fransa, 4 - 07 Eylül 2017, ss.150

Wear properties of plasma nitrided Inconel 718 superalloy

KOVACI H., ASL GHAHRAMANZADEH H., ALBAYRAK Ç., ALSARAN A.
13th International Conference on Plasma Surface Engineering-PSE, Garmisch-Partenkirchen, Almanya, 10 - 14 Eylül 2012

Dubleks yüzey işlemi uygulanmış AISI 4140 çeliğinin elektrokimyasal özelliklerinin belirlenmesi

KOVACI H., BOZKURT Y. B., ASLAN M., YETIM A. F., ÇELİK A.
2nd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.150

Comparison of tribological properties of TiO2, ZrO2 and TiO2–ZrO2 composite films prepared by sol–gelmethod

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
2ndInternational Conference on Advanced Engineering Technologies (ICADET’17), 21 - 23 Eylül 2017

Radius kırıklarında kullanılan plak fiksasyonu ve intramedüller çivileme yöntemlerinin teorik olarak incelenmesi

KOVACI H., ÇELİK A., ALSARAN A., KAYMAZ İ., SAKA G.
VI. Ulusal Biyomekanik Kongresi, Türkiye, 27 - 29 Eylül 2012, cilt.1, ss.21

Effect of crystallographic orientation on wear properties of MoS2-Ti coatings by pulsed-dc in nitrogen and humid air

EFEOĞLU İ., BÜLBÜL F., ÇELİK A.
ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2003, ss.1

Analysis of flow accelerated electrochemical corrosıon properties of different metallic biomaterials

BOZKURT Y. B., ATİK B., KOVACI H., UZUN Y., ÇELİK A.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.269-273

Plasma nitrocarburising of CoCrCo alloy

ÇELİK A., YETIM A. F., YILDIZ F., KOVACI H., BAYRAK O.
2nd International Scientific Conference on Engineering, Antalya, Türkiye, 22 - 24 Kasım 2012, ss.359-364

Microstructures and tribological behaviours of plasma nitrided and nitrocarburized AISI5140 stee

EFEOĞLU İ., Alsaran A., KARAKAN M., BÜLBÜL F., ÇELİK A.
ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2003, ss.1

Corrosion Behaviour Of Plasma Oxidized Commercial Pure Titanium Under Artificial Saliva AndRinger Solution Environments

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
KORSEM16, 5 - 07 Ekim 2016

The influence of different surface treatment on the behavior of fatigue crack growth of AISI 4140 under two-stage block loading

BOZKURT Y. B., KOVACI H., YETİM A. F., BARAN Ö., ÇELİK A.
5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Türkiye, 17 - 19 Aralık 2019

İnsan vücudunda kullanılan farklı implantlara uygulanan biyomekanik testler ve ülkemizin biyomekanik test ihtiyacına genel bir bakış

KOVACI H., BAYRAK O. Ü., HACISALIHOGLU I., VANGÖLÜ S. Y., ALBAYRAK C., BARAN O., et al.
IV. Ulusal Tıbbi Cihazlar İmalat Sanayi Kongre ve Sergisi, Samsun, Türkiye, 23 - 24 Eylül 2011, ss.39-45

Plazma ile nitrürlenmiş AISI 4140 malzemenin dinamik özelliklerinin incelenmesi

AYDIN M. R., KOVACI H., ÇELİK A., GÜNDOĞDU Ö.
Uluslararası Katılımlı 17. Makine Teorisi Sempozyumu, İzmir, Türkiye, 14 - 17 Haziran 2015, ss.25

Biyouyumluluk perspektifinde östenitik paslanmaz çelik, beta titanyum ve alfabeta titanyum alaşımlarının tribokorozyon performanslarının incelenmesi

ATİK B., BOZKURT Y. B., KOVACI H., YETİM T., ÇELİK A.
Uluslararası Fen, Matematik ve Mühendislik Kongresi-Ege Üniversitesi, İzmir, Türkiye, 8 - 10 Ekim 2019

Determination of fracture micromechanics and fracture toughness of plasma nitrided, DLC coated and duplex surface treated AISI 4140 steel

KOVACI H., YETİM A. F., BARAN Ö., ÇELİK A.
27th Annual International Conference on Composites or Nano Engineering (ICCE-27), Granada, Nikaragua, 14 - 20 Temmuz 2019

Comparison of structure and tribological properties of titanium oxide films fabricated by thermal ozidation, DC plasma oxidation and the sol-gel

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017

In-Situ X-ray diffraction studies of the structure of nitride thin films under various temperatures

EFEOĞLU İ., ÇELİK A., Arnell D.
ICMCTF99, Int. Conf. on Metallurgical Coatings and Thin Films9, San Diago, Amerika Birleşik Devletleri, 12 - 15 Nisan 1999, ss.1

The effect of magnetic field on the wear properties of a ferromagnetic steel

YETİM A. F., KOVACI H., ASLAN M., ÇELİK A.
19th International Conference on Wear of Materials, WOM 2013, 14 - 18 Nisan 2013, cilt.1, ss.105-110

Multi-pass scratch test behaviour of TiAlN thin film deposited on 316L and Ti6Al4V alloy by dc-biased and pulsed magnetron sputtering

Yıldız F., ALSARAN A., ÇELİK A., EFEOĞLU İ.
NORDRIB 2008, 13th Nordic Symposium on Tribology, Tempere, Finlandiya, 10 - 13 Temmuz 2008, ss.1

Tibia kırıklarında kullanılan kilitli ve kilitsiz plak fiksasyon sistemlerinin sonlu elemanlar yöntemiyle incelenmesi

KAHRAMANZADE H., KOVACI H., ALSARAN A., KAYMAZ İ., ÇELİK A., YILDIRIM Ö. S.
Uluslararası Katılımlı VII. Ulusal Biyomekanik Kongresi, Isparta, Türkiye, 16 - 18 Ekim 2014

Comparison of electrochemical corrosion behavior of Ti6Al4V produced by selective laser melting

BOZKURT Y. B., KOVACI H., YETİM A. F., ACAR M. T., ÇELİK A.
5th International Conference on Advances in Mechanical Engineering-Yıldız Technical University, İstanbul, Türkiye, 17 - 19 Aralık 2019

Corrosion and wear behavior of Ti-doped Al2O3 nanocomposite coatings on CP-Ti

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
20th. International Conference on Composite Structures (ICCS2017), 4 - 07 Eylül 2017

Comparison of tribological and electrochemical properties of titanium oxide films produced on Cp-Ti by sol-gel and SILAR methods

ÇOMAKLI O., Yazıcı M., KOVACI H., Yetim T., YETIM A. F., ÇELİK A.
45th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.150

Investigation of corrosion behavior of Ni-doped Al2O3 film coated Cp-Ti

Turalıoğlu K., Taftalı M., Yetim T., Yazıcı M., ÇOMAKLI O., KOVACI H., et al.
2nd International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.155

ANALYSIS OF FLOW ACCELERATED ELECTROCHEMICAL CORROSION PROPERTIES OF DIFFERENT METALLIC BIOMATERIALS

Bozkurt Y. B., Atik B., Kovacı H., Uzun Y., Çelik A.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.269-273

Comparison of electrochemical properties of TiO2, ZrO2 and TiO2–ZrO2 composite films deposited on Ti45Nb alloys

ÇOMAKLı O., YAZICI M., KOVACI H., YETIM T., ÇELIK A., YETIM A. F.
21th International Conference on Composite Structures (ICCS21), Bologna, İtalya, 4 - 07 Eylül 2018, ss.66

Effects of implant-abutment diameter and connection type on the fatigue properties of dental implants

KOVACI H.
International Conference on Engineering Technologies (ICENTE'18), Konya, Türkiye, 26 - 28 Ekim 2018, ss.15

Effects of duplex composite layers produced by plasma nitriding and DLC coating on fatigue crack growth behavior of a low-alloy steel

KOVACI H., BARAN Ö., YETİM A. F., ÇELİK A.
21th International Conference on Composite Structures (ICCS21), 4 - 07 Eylül 2018

THE MECHANICAL PROPERTIES of DIFFERENT CELLULAR LATTICE STRUCTURES MANUFACTURED by SELECTIVE LASER MELTING: EXPERIMENTS and FINITE ELEMENT ANALYSIS

YILDIZ F., HACISALİHOĞLU İ., KORKMAZ İ. H., KAYMAZ İ., ÇELİK A.
9 TH INTERNATIONAL BIOMECHANICS CONGRESS, Eskişehir, Türkiye, 19 - 22 Eylül 2018

INVESTIGATION OF STRUCTURAL ELECTROCHEMICAL PROPERTIES OFTiO2 Al2O3 COMPOSİTE FILMS COATED CP Ti BİOMATERIAL

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
ULUSLARARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, 5 - 07 Kasım 2015

Friction and wear properties of B-doped TiO2 thin films produced on Ti6Al4V alloy

ACAR M. T., YETİM T., KOVACI H., YETİM A. F., ÇELİK A.
3rd International Conference on Engineering Technology and Applied Sciences (ICETAS), 17 - 21 Temmuz 2018

The effect of wear mechanism for plasma oxidised Cp-Ti and its alloys on tribocorrosion performance

SEÇER Y., BOZKURT Y. B., KOVACI H., YETİM A. F., ÇELİK A.
9th International Conference on Advanced Technologies, İstanbul, Türkiye, 10 - 12 Ağustos 2020

INVESTIGATION OF CHARACTERIZATION AND WEARPROPERTIES OF TIO2 AL2O3 COMPOSITE FILM COATED ON CP TI

YAZICI M., ÇOMAKLI O., YETİM T., YETİM A. F., ÇELİK A.
ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, 5 - 07 Kasım 2015

Effect of Sol Aging Time on the Wear Properties of TiO2 SiO2 Composite FilmsPrepared by a Sol Gel Method

YAZICI M., ÇOMAKLI O., YETİM T., YETİM A. F., ÇELİK A.
IPCAP 2016, 25 - 27 Şubat 2016

Corrosion Performance And Semiconductor Properties Of SiO2 TiO2 Multilayer TiO2 SiO2 Coatings Deposited On Cp Ti İmplant Material In Simulated Body Fluid SBF Solution

YAZICI M., ÇOMAKLI O., YETİM T., YETİM A. F., ÇELİK A.
KORSEM16, 5 - 07 Ekim 2016

Comparison of Structure and Corrosion Properties of Titanium Oxide Films Prepared by ThermalOxidation, DC Plasma Oxidation, and by The Sol-Gel

ÇOMAKLI O., YAZICI M., YETİM T., YETİM A. F., ÇELİK A.
2ndInternational Conference on Advanced Engineering Technologies (ICADET’xx17), 21 - 23 Eylül 2017

Termokimyasal yüzey işlemi uygulanmış AISI 4140 çeliğinin farklı ortamlardaki elektrokimyasal performansının değerlendirilmesi

Tüzemen Ş. M., Bozkurt Y. B., Kovacı H., Yetim A. F., Çelik A.
Uluslararası Fen, Matematik ve Mühendislik Kongresi, İzmir, Türkiye, 8 - 10 Kasım 2019, ss.98 Sürdürülebilir Kalkınma

Improving tribological performance with oxidationprocess for boronized TI6AL4V alloys

Bozkurt Y. B., Seçer Kavasoğlu Y., Kovacı H., Uzun Y., Çelik A.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Nevşehir, Türkiye, 26 - 28 Kasım 2021, ss.274-278

The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field

YETİM A. F., KOVACI H., YILDIZ F., BAYRAK Ö., ÇELİK A.
20th International Conference on Wear of Materials, WOM 2015, Toronto, Kanada, 12 - 16 Nisan 2015

Kitap & Kitap Bölümleri

Plasma Assisted Thermochemical Treatments

ÇELİK A., ALSARAN A., KARAKAN M.
Thin Films and Coatings:New Research, Caruta B.M., Editör, Nova Science Publishers, New York, ss.133-165, 2005

Kaynak ve Metal (sıcak-soğuk) Kesme İşlemlerinde İSG

KOVACI H.
Elektrik ve Metal İşlerinde İSG, Muhammed Fatih Çora, İhsan Efeoğlu, Editör, Atatürk Üniversitesi, ss.326-347, 2019

Temel Tanımlar ve Kavramlar

KOVACI H.
Makina ve Teçhizat, Bilen Kadir, Editör, Atatürk Üniversitesi Açıköğretim Fakültesi Yayını, ss.4-26, 2020

KAYNAK TEKNOLOJİSİ

Karadeniz S., Yetim A. F., Kovacı H., Uzun Y., Aslan M., Çelik A. (Editör)
Nobel Yayın Dağıtım, Ankara, 2020

Bağlama Elemanları

KOVACI H.
Makina ve Teçhizat, Bilen A., Editör, Atatürk Üniversite Yayınları, Erzurum, ss.1-24, 2017

Bilirkişi Raporları

Sondaj Boruları İnceleme Raporu

ÇELİK A., EFEOĞLU İ., KOVACI H.
Gümrük ve Ticaret Bakanlığı, Erzurum Gümrük Müdürlüğü, ss.4, Erzurum, 2016

Mekanik ve Kimyasal Analiz Raporu

KOVACI H., YEŞİLDAL R.
Boru Hatları ile Petrol Taşıma A.Ş. (BOTAŞ), ss.9, Erzurum, 2019

Sondaj Boruları İnceleme Raporu

ÇELİK A., EFEOĞLU İ., KOVACI H.
Gümrük ve Ticaret Bakanlığı, Erzurum Gümrük Müdürlüğü, ss.4, Erzurum, 2016

Fore Kazık Makinesi Kelly Aparatı Hasar Analiz Raporu

KOVACI H., KARAKAN M.
Dedem Hafriyat İnşaat Taahhüt İş Makineleri İç ve Dış Tic. Ltd. Şti., ss.8, Erzurum, 2018

Diğer Yayınlar

DİJİTAL OLGUNLUK SEVİYE TESBİT RAPORO

Uzun Y.
Diğer, ss.1-18, 2021