Publications

SURFACE REVIEW AND LETTERS, vol.19, no.4, 2012 (SCI-Expanded)

Tribological properties of composite multilayer coating

GEBRETSADIK D., HARDELL J., EFEOĞLU İ., PRAKASH B.

Tribology - Materials, Surfaces and Interfaces, vol.5, no.3, pp.100-106, 2011 (SCI-Expanded)

The wear behaviour of duplex treated AISI 5140 steel

TOTİK Y., Alsaran A., ÇELİK A., EFEOĞLU İ.

INDUSTRIAL LUBRICATION AND TRIBOLOGY, vol.63, no.5, pp.344-349, 2011 (SCI-Expanded)

Deposition and Adhesion Characterization of Ti(BN:MoS2) Based Composite Thin Films Prepared by Closed-Field Unbalanced Magnetron Sputtering

YETIM A. F., EFEOĞLU İ., ÇELİK A., Alsaran A., Kaymaz I.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, vol.25, no.13, pp.1497-1505, 2011 (SCI-Expanded)

Optimization of the coating parameters for micro-arc oxidation of Cp-Ti

VANGOLU Y., ARSLAN E., TOTİK Y., DEMİRCİ E., ALSARAN A.

Surface and Coatings Technology, vol.205, no.6, pp.1764-1773, 2010 (SCI-Expanded)

MoS2-Ti composite films having (002) orientation and low Ti content

CRYSTALLOGRAPHY REPORTS, vol.55, no.7, pp.1177-1182, 2010 (SCI-Expanded)

The effect of TiC transient layer on a DLC-based functionally gradient coating prepared by closed field unbalanced magnetron sputtering plating system

METALS AND MATERIALS INTERNATIONAL, vol.16, no.4, pp.573-580, 2010 (SCI-Expanded)

Investigation of the adhesion of NbN coatings deposited by pulsed dc reactive magnetron sputtering using scratch tests

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, vol.7, no.4, pp.485-492, 2010 (SCI-Expanded)

Effect of R600a on tribological behavior of sintered steel under starved lubrication

Sariibrahimoglu K., Kızıl H., Aksit M. F., EFEOĞLU İ., KERPICCI H.

TRIBOLOGY INTERNATIONAL, vol.43, pp.1054-1058, 2010 (SCI-Expanded)

Influence of Surface Roughness on Corrosion and Tribological Behavior of CP-Ti After Thermal Oxidation Treatment

ARSLAN E., TOTİK Y., DEMİRCİ E., ALSARAN A.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, vol.19, no.3, pp.428-433, 2010 (SCI-Expanded)

Characterization of Ti-CN-a:C films prepared by pulsed-dc bias sputtering

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, vol.224, pp.677-684, 2010 (SCI-Expanded) Sustainable Development

The Fretting Fatigue of Commercial Hard Anodized Aluminum Alloy

SADELER R., ATASOY S., ARICI A. A., TOTİK Y.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, vol.18, no.9, pp.1280-1284, 2009 (SCI-Expanded)

Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment

YILDIZ F., YETİM A., ALSARAN A., EFEOĞLU İ.

WEAR, vol.267, pp.695-701, 2009 (SCI-Expanded)

CHARACTERIZATION OF TiB2 COATING ADHERENCE BY A MULTI-PASS SCRATCH TESTING

TOTİK Y., ARSLAN E., EFEOĞLU İ., Kaymaz I.

SURFACE REVIEW AND LETTERS, vol.16, no.3, pp.329-335, 2009 (SCI-Expanded)

Tribological characteristics of MoS2-Nb solid lubricant film in different tribo-test conditions

EFEOĞLU İ., Baran O., YETIM F., Altintas S.

SURFACE & COATINGS TECHNOLOGY, vol.203, pp.766-770, 2008 (SCI-Expanded)

A comparative study: The effect of surface treatments on the tribological properties of Ti-6Al-4V alloy

YETİM A., ALSARAN A., EFEOĞLU İ., ÇELİK A.

SURFACE & COATINGS TECHNOLOGY, vol.202, no.11, pp.2428-2432, 2008 (SCI-Expanded)

The effect of substrate on the wear behaviour of Ni electroplating coatings

KOVOVE MATERIALY-METALLIC MATERIALS, vol.46, no.5, pp.301-308, 2008 (SCI-Expanded)

Deposition and characteriztion of a multilayered-composite solid lubricant coating

Efeoglu I.

REVIEWS ON ADVANCED MATERIALS SCIENCE, vol.15, no.2, pp.87-94, 2007 (SCI-Expanded)

The effect of bias voltage and working pressure on S/Mo ratio at MoS2-Ti composite films

BULBUL F., Efeoglu I., Arslan E.

APPLIED SURFACE SCIENCE, vol.253, no.9, pp.4415-4419, 2007 (SCI-Expanded)

The effect of manganese phosphate coating treatment on fretting fatigue strength of AISI 1045 steel

TOTİK Y., CAGLAROGLU A., SADELER R.

KOVOVE MATERIALY-METALLIC MATERIALS, vol.45, no.5, pp.275-281, 2007 (SCI-Expanded)

The corrosion behaviour of manganese phosphate coatings applied to AISI 4140 steel subjected to different heat treatments

SURFACE & COATINGS TECHNOLOGY, vol.200, no.8, pp.2711-2717, 2006 (SCI-Expanded)

Co-sputtered Mo : S : C : Ti : B based coating for tribological applications

Efeoglu I.

SURFACE & COATINGS TECHNOLOGY, vol.200, pp.1724-1730, 2005 (SCI-Expanded)

Effect of crystallographic orientation on the friction and wear properties of MoxSy-Ti coatings by pulsed-dc in nitrogen and humid air

Efeoglu I., BULBUL F.

WEAR, vol.258, pp.852-860, 2005 (SCI-Expanded)

The corrosion behavior of AISI 4140 steel subjected to different heat treatments

Çiçek H., Can Akar O., Efeoğlu İ.

CORROSION REVIEWS, vol.23, pp.379-390, 2005 (SCI-Expanded)

The effects of artificial aging on wear properties of AA 6063 alloy

GAVGALI M., Totik Y., SADELER R.

MATERIALS LETTERS, vol.57, pp.3713-3721, 2003 (SCI-Expanded)

The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions

Totik Y., SADELER R., ALTUN H., GAVGALI A.

MATERIALS & DESIGN, vol.24, no.1, pp.25-30, 2003 (SCI-Expanded)

The effect of homogenization treatment on the hot workability between the surface and the center of AA 2014 ingots

Totik Y., GAVGALI M.

MATERIALS CHARACTERIZATION, vol.49, no.3, pp.261-268, 2002 (SCI-Expanded)

An investigation of the relationship between heat treatment and microstructure in (TiAlV)N and (TiAl)N ceramic films

Totik Y., Efeoglu I., Gavgali M., Sadeler R.

MATERIALS CHARACTERIZATION, vol.47, no.1, pp.55-60, 2001 (SCI-Expanded)

Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated plus nitrided

Efeoglu I., Celik A.

MATERIALS CHARACTERIZATION, vol.46, no.4, pp.311-316, 2001 (SCI-Expanded)

Multi-pass sub-critical load testing of titanium nitride coatings

Efeoglu I., ARNELL R.

THIN SOLID FILMS, vol.377, pp.346-353, 2000 (SCI-Expanded)

DEPOSITION OF WEAR-RESISTANT COATINGS BASED ON DIAMOND-LIKE CARBON BY UNBALANCED MAGNETRON SPUTTERING

MONAGHAN D., TEER D., LOGAN P., EFEOGLU I., ARNELL R.

SURFACE & COATINGS TECHNOLOGY, vol.60, pp.525-530, 1993 (SCI-Expanded)

DEPOSITION OF GRADED ALLOY NITRIDE FILMS BY CLOSED FIELD UNBALANCED MAGNETRON SPUTTERING

MONAGHAN D., TEER D., LAING K., EFEOGLU I., ARNELL R.

SURFACE & COATINGS TECHNOLOGY, vol.59, pp.21-25, 1993 (SCI-Expanded)

THE EFFECT OF THE CONDITION OF THE SCRATCH DIAMOND ON MEASURED CRITICAL LOADS

ARNELL R., EFEOGLU I.

VACUUM, vol.44, no.8, pp.805-807, 1993 (SCI-Expanded)

ION-ASSISTED CVD OF GRADED DIAMOND-LIKE CARBON (DLC) BASED COATINGS

MONAGHAN D., TEER D., ARNELL R., EFEOGLU I., AHMED W.

JOURNAL DE PHYSIQUE IV, vol.3, pp.579-587, 1993 (SCI-Expanded)

THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF TITANIUM ALUMINUM NITRIDE COATINGS FORMED IN A 4 MAGNETRON CLOSED-FIELD SPUTTERING SYSTEM

EFEOGLU I., ARNELL R., TINSTON S., TEER D.

SURFACE & COATINGS TECHNOLOGY, vol.57, pp.117-121, 1993 (SCI-Expanded)

Articles Published in Other Journals

Farklı Sıcaklıklarda Yapılan Isıl İşlemlerin Titanyum-Nikel Filmlerin Kristal Yapısına Etkisinin Araştırılması

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.11, no.1, pp.526-534, 2021 (Peer-Reviewed Journal)

Quantification of the Effects of Coating Parameters on the Properties of TiAlZrN Coatings

Sert Y., Küçükömeroğlu T., Efeoğlu İ.

Brilliant Engineering, no.4, pp.1-8, 2020 (Peer-Reviewed Journal)

Determining Optimum Parameters for Adhesion Properties of Ta-DLC Films Using Taguchi Experimental Design

Keleş A., Baran Ö., Urvasızoğlu G., Ataol M., Totik Y., Ertaş Ü., et al.

Brilliant Engineering, vol.1, no.1, pp.1-6, 2020 (Peer-Reviewed Journal)

PRODUCTION OF COBALT AS A CRITICAL METAL FROM PRIMARY AND SECONDARY RESOURCES KRİTİK METAL KONUMUNDAKİ KOBALTIN BİRİNCİL VE İKİNCİL KAYNAKLARDAN ÜRETİMİ

YAYLALI B., YAZICI E. Y., CELEP O., DEVECİ H.

Scientific Mining Journal, vol.59, no.1, pp.35-50, 2020 (Scopus)

The Effect of Cu doping on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.13, no.1, pp.181-189, 2020 (Peer-Reviewed Journal)

TEM characterization and synthesis of nanoparticle B4C by high-energy milling

Gökmeşe H., Bostan B., Yılmaz T. A., Taşcı U.

International Advanced Researches and Engineering Journal, vol.3, no.3, pp.195-201, 2019 (Peer-Reviewed Journal)

Effect of Target Voltage on Tribological andAdhesive Properties of c-BN Films Coated withHiPIMS

KELEŞ A., EFEOĞLU İ.

2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 2019 (Scopus)

Synthesis and investigation of structural-mechanical-tribological properties of c-BN based BN thin films

EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

Bor Dergisi, vol.2, pp.11-17, 2017 (Peer-Reviewed Journal)

Plazma ile nitrürleme ve mangan fosfat kaplama işleminin AISI 5140 çeliğinin aşınma davranışı üzerine etkisi

Totik Y., Alsaran A., Yetim A. F., Efeoğlu İ.

Mühendis ve Makina, vol.50, no.595, pp.34-38, 2009 (Peer-Reviewed Journal) Sustainable Development

Refereed Congress / Symposium Publications in Proceedings

Sivil Toplum ve Sivil İtaatsizlik İlişkisi Üzerine Bir Değerlendirme

AYDIN S.

International Conferance On Social Sciences-Cappadocia, 16 - 20 April 2018

Deposition of graded alloynitred films by unbalanced magnetron sputtering

IVC-12/ICSS-8, Den Hagg, Netherlands, 12 - 16 October 1992, pp.1

Ion-assisted CVD diamond like carbon (DLC) case coatings

EFEOĞLU İ., Monaghan D., Teer D., Ahmad W., Arnell D.

EUROCVD'93, Tempere, Finland, 22 - 27 August 1993, pp.1

High density molybdenum disulphide films by CFUMBS

ICMCTF93, Int. Conf. on Metallurgical Coatings and Thin Films3, San Diago, United States Of America, 19 - 23 April 1993, pp.1

The mechanical and tribological properties of TiAlN coatings formed in a four magnetron closed-field sputtering system

EFEOĞLU İ., Arnell R. D., Tinston S., Teer D.

ICMCTF1992 -Int. Conference for Metallurgical Coatings and Thin Films, San Diago, United States Of America, 6 - 10 April 1992, vol.--

The mechanical and tribological properties of TiN coatings formed in a four magnetron closed-field sputtering system

EFEOĞLU İ., Arnell R. D., Tingston S., Teer D.

ICMCTF92, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 6 - 10 April 1992, pp.1-3

High density molybdenum disulphide films by CFUMBS

ÇİÇEK H., AKAR O. C., EFEOĞLU İ.

ICMCTF93, Int. Conf. on Metallurgical Coatings and Thin Films3, San Diago, United States Of America, 19 - 23 April 1993, pp.1

Investigation of mechanical and tribological properties of BCN thin films

GÜLTEN G., EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

Science and Applications of Thin Films, Conference Exhibition (SATF 2018), 17 - 21 September 2018

Structural and Mechanical Properties of TiNi Coatings Deposited With Magnetron Sputtering Method at Different Coating Parameters

IMSEC-2019, 25 - 27 April 2019

Optimization for Adhesion Properties of c-BN Films Coated with HiPIMS,

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films TownCountry Convention Center,San Diego,CA,USA, 19 - 24 May 2019

MoS2-Ti Kati Yağlayici İnce Film Kaplamalar

EFEOĞLU İ., BÜLBÜL F., ARSLAN E., KARAKAN M., YETİM A. F.

11. Uluslararası Denizli Malzeme Sempozyumu, Denizli, Turkey, 19 - 21 April 2006, pp.585-589

Evaluation of adhesion and fetigue behaviours of MoS2-Nb solid lubricant films

EFEOĞLU İ., ARSLAN E., Baran Ö., TOTİK Y.

E-MRS Spring Meeting, Strasborg, France, 28 May - 01 June 2007, pp.1

Compearing of adhesion properties of TiNbVN coatings deposited on differant sunbstrates

EFEOĞLU İ., TOTİK Y., Baran Ö., KELEŞ A., Çiçek H.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

Mechanical and tribological properties of graded Ti(BN-MoS2) based PVD coatings

EFEOĞLU İ., ÇELİK A., ALSARAN A., KAYMAZ İ., Yetim F.

ICMCTF09, 36th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 27 April - 01 May 2009, pp.1

Deposition and characterization of metal/diamond-like carbon (Me/DLC) thin films prepared by closed-field unbalanced magnetron sputtering

ESF Exploratory Workshop on Carbon-Based Nanostructured Composite Film, Gdansk, Poland, 30 August - 01 September 2006, pp.1

MoS2-Ti composite coatings deposited by closed-field unbalanced magnetron sputter ion plating: Mechanical-tribological-structural chracterization

EFEOĞLU İ., ARSLAN E., BÜLBÜL F.

ICMCMCTF02, Int. Conf. on Metallurgical Coatings and Thin Films0, San Diago, United States Of America, 22 - 26 April 2002, pp.1

The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy

BARAN Ö., KELEŞ A., ÇİÇEK H., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 April 2017

Deposition of graded alloynitred films by unbalanced magnetron sputtering

IVC-12/ICSS-8, Den Hagg, Netherlands, 12 - 16 October 1992, pp.1

Ion-assisted CVD diamond like carbon (DLC) case coatings

EFEOĞLU İ., Monaghan D., Teer D., Ahmad W., Arnell D.

EUROCVD'93, Tempere, Finland, 22 - 27 August 1993, pp.1

Tribological characterization of Me(Nb-Ti)DLC films grown by pulsed-dc magnetron sputtering

EFEOĞLU İ., Uğur D., Baran Ö., ARSLAN E., Altıntaş S.

E-MRS Spring Meeting, Strasbourg, France, 26 - 30 May 2008, pp.1

The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

Baran Ö., Bidev F., Çiçek H., Kara L., EFEOĞLU İ., Küçükömeroğlu T.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates

ÇİÇEK H., BARAN Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 April 2017

Comparison of Functional Composite Thin Films Deposited by CFUBMS-PVD Using Different Power Sources

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.242-243

Multi-pass Scratch Test of DLC Coatings Deposited by CFUBMS on Anodised-CP-Ti at the Different Temperatures and Potentials

Albayrak C., Baran Ö., ALSARAN A., EFEOĞLU İ., ÇELİK A.

ICMCTF2010, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

HARDNESS and ADHESION PROPERTIES of PVD- (Ti, Cr, Nb)-hBN

SERT Y., YEŞİLYURT M., GÜNAYDIN O., KÜÇÜKÖMEROĞLU T., GÜLTEN G.

International Conference on Material Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'21), Nevşehir, Turkey, 31 May 2021

The Investigation of the Adhesion, Wear and Friction Properties of TiN/TaN Multilayer Coatings

Baran Ö., Demirci E., EFEOĞLU İ., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, United States Of America, 23 - 27 April 2018

Deposition and characterization of nano-structured Mos2-Ti composite thin films prepared by CFUBMS

NanoTR-I, Nano Science and NanoTechnology Conference, Ankara, Turkey, 25 May - 27 April 2005, pp.1

Boron Based Coatings for Strategic Applications: Typical Research Results

EFEOĞLU İ., KELEŞ A., TOTİK Y.

ICANAS 2019 4th INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCES, 19 - 22 June 2019

Tribological behavior of sintered steel under starved lubrication in R600A environment

Sarıibrahimoğlu K., Kızıl H., Akşit M., EFEOĞLU İ., Kerpiççi H.

2nd International Conference on Advanced Tribology, iCAT 2008, Singapur: iCAT 2008, Singapur, Singapore, 1 - 04 September 2008, pp.1

The wear behaviour of manganese phosphate coatings applied on the plasma nitrided AISI 5140 steel

TOTİK Y., ALSARAN A., ÇELİK A., EFEOĞLU İ.

E-MRS Spring Meeting, Starsborg, France, 20 May - 01 June 2007, pp.1

Multi-pass sub-critical load testing of TiN coatings

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ.

ICMCTF2000, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 10 - 14 April 2000, pp.1

Titanyum Alaşımlarının DLC Kaplama Sonrası Tribokorozyon Özelliklerinin Araştırılması

15:Uluslararası Korozyon Sempozyumu, Hatay, Turkey, 26 - 29 September 2018, pp.1-5

Structural, Mechanical and Tribological Properties of TiTaBN CompositeGraded Coatings Deposited by CFUBMS Technique

ICMCTF2012, 39th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 23 - 27 April 2012, pp.1

...........

Hardell J., EFEOĞLU İ., Prakash B.

14th Nordic Symposium on Tribology : NORDTRIB 2010, Lulea, Sweden, 8 - 11 June 2010, pp.1

Characterization of Ti ve Nb Doped DLC Films Grown by Pulseddc PVD-Closed Field Unbalanced Magnetron Sputtering CFUBMS) Method

Uğur D., EFEOĞLU İ., Altıtaş S.

ASME /STLE International Joint Tribology Conferance, San Diago, United States Of America, 22 - 24 October 2007, pp.1

MoS2-Ti Kati Yağlayici İnce Film Kaplamalar

EFEOĞLU İ., BÜLBÜL F., ARSLAN E., KARAKAN M., YETİM A. F.

11. Uluslararası Denizli Malzeme Sempozyumu, Denizli, Turkey, 19 - 21 April 2006, pp.585-589

...........

Hardell J., EFEOĞLU İ., Prakash B.

14th Nordic Symposium on Tribology : NORDTRIB 2010, Lulea, Sweden, 8 - 11 June 2010, pp.1

Mechanical and tribological properties of multilayered-composite solid lubricant films

E-MRS Coference, Varşova, Poland, 4 - 08 September 2006, pp.1

Study Of Structural and Mechanical Properties Of CrAlYN/CrY Multilayer Thin Film Deposited On M2 Steel

Tahmasabian M., EFEOĞLU İ., EZİRMİK K. V., TOTİK Y., Demirci E., Baran Ö.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

Effect of Deposition Parameters on the Tribological Properties of Ti DLC Films

Kurucu K., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Turkey, 25 - 27 June 2014, pp.56

The Adhesion Properties of c-BN Films Coated Using HiPIMS and Pulsed-dc Magnetron Sputtering

EFEOĞLU İ., TOTİK Y., KELEŞ A., GÜLTEN G., ERSOY K., DURKAYA G.

SATF, 17 - 21 September 2018

MoS2-Ti composite solid lubricant deposited by biased-dc and pulsed-dc

EFEOĞLU İ., BÜLBÜL F., ARSLAN E.

ICMCMTF02, Int. Conf. on Metallurgical Coatings and Thin Films0, San Diago, United States Of America, 22 - 26 April 2002, pp.1

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Thin Films

Kara L., Baran Ö., Küçükömeroğlu T., EFEOĞLU İ.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

Comparison of Functional Composite Thin Films Deposited by CFUBMS PVD Using Differantial Power Sources

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., ARMAĞAN A. N.

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 March 2018

High Temperature Wear Resistance of TiCrAlCN/TiAlN Multilayer PVD Coatings on M2 High Speed Steel

EFEOĞLU İ., Demirci E., Baran Ö., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

Phase Transformation of MoS2-Nb Composite Films at the High Temperatures

EFEOĞLU İ., Altıntaş S., ARSLAN E., Baran Ö., Uğur D.

ICMCTF2011, 38th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 02 May 2011 - 06 May 2010, pp.1

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılmas

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ., Baran Ö.

15:Uluslararası Korozyon Sempozyumu, Hatay, Turkey, 21 - 25 September 2018, pp.1-5

Mechanical, Structural and Tribological Properties of TiAlZrN Coated AISI H13 Steel

SERT Y., KARA L., KÜÇÜKÖMEROĞLU T., EFEOĞLU İ.

International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, vol.1, pp.1019-1022

Interfacial scratch adhesion behaviour of multilayered Ti(BN):Ti(MoS2) based PVD coatings

EFEOĞLU İ., Prakash B., Hardell J.

ICMCTF09, The 36th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 27 April - 01 May 2009, pp.1

TİTANYUM BİYOMALZEMELERİN TRİBOKOROZYON ÖZELLİKLERİNİN ARAŞTIRILMASI

15. ULUSLARARASI KOROZYON SEMPOZYUMU, 26 - 28 September 2018

c-BN based BN Thin Film Synthesis and Investigation The Structural-Mechanical-Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A., Ersoy K., Durkaya G.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

Magnetron Sıçratma Yöntemi ile Kristal Yapıda TiNi Şekil Hafızalı Filmlerin Büyütülmesi

EFEOĞLU İ., ÇİÇEK H.

ASELSAN 1. Malzeme Teknolojileri Çalıştayı, Turkey, 14 - 15 September 2015

. Investigation of Adhesion and Corrosion Properties of CrAlYN/CrY Multilayer Coatings Deposited by Unbalanced Magnetron Sputtering

Tahmasabian M., EFEOĞLU İ., EZİRMİK K. V., ARSLAN E., TOTİK Y., Demirci E., et al.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

Toz Metalurji Yöntemi İle Üretilmiş AA7075 Taban Malzeme Üzerine KaplanmışMoS2-TiB2 Kompozit Filmin Yapısal Mekanik Ve Tribolojik Özelliklerin Araştırılması

YILMAZ T. A., LÜLE ŞENÖZ G. M., EFEOĞLU İ., TOTİK Y., KELEŞ A.

!.International Symposium on Light Alloys Composite Materials, 22 - 24 March 2018

Bor Nitrür BN Esaslı İnce Film Kaplamalar ve Teknolojik Uygulamaları Üzerine Ar Ge Çalışması

EFEOĞLU İ., KELEŞ A., TOTİK Y., ÇİÇEK H.

2.Aselsan Malzeme Çalıştayı, Turkey, 15 November 2016

In Vitro bioactivity of ceramic coatings on magnesium implant materials by PEO

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y.

BIOMED 2017 22nd International Biomedical Science and technology Symposium, 12 - 14 May 2017

Effect of Deposition Parameters on Mechanical Properties of MoS2-Ti Coatings

Kara L., Küçükömeroğlu T., EFEOĞLU İ., Danışman Ş., savaş S.

14th International Materials Symposium, İstanbul, Turkey, 10 - 12 October 2012, pp.435-441

Investigation of structural ,mechanical and tribological properties of TiAlN/CrN multilayer films deposited by CFUBMS technique

Laloğlu Ç., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF2012, 39th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 23 - 27 April 2012, pp.1

Effect of Deposition Parameters on Mechanical Properties of MoS2-Ti Coatings

Kara L., Küçükömeroğlu T., EFEOĞLU İ., Danışman Ş., savaş S.

14th International Materials Symposium, İstanbul, Turkey, 10 - 12 October 2012, pp.435-441

Phase Transformation of MoS2-Nb Composite Films at the High Temperatures

EFEOĞLU İ., Altıntaş S., ARSLAN E., Baran Ö., Uğur D.

ICMCTF2011, 38th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 02 May 2011 - 06 May 2010, pp.1

The mechanical and tribological properties of Ti(Nb, V) N films on the 2024 Al-alloy

Baran Ö., KELEŞ A., Çiçek H., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication

Sarıibrahimoğlu K., Kızıl H., Akşit M., EFEOĞLU İ., Birol F.

The 47th Annual Conference of Metallurgists, COM 2008, Montreal, Canada, 2 - 06 August 2008, pp.1

Investigation of mechanical and tribological properties of BCN thin films

TOTİK Y., Gülten G., Efeoğlu İ., Keleş A., Ersoy K., Durkaya G.

SATF15, İzmir, Turkey, 21 - 25 September 2018, pp.1-5

TiN seramik filmlerin yapısal ve oksidasyon özellikleri

EFEOĞLU İ., GAVGALI M., ÇELİK A., EZİRMİK K. V.

Makina-İmalat Teknolojileri Sempozyumu, Konya, Turkey, 19 - 21 October 1999, pp.118-124

Effect of Deposition Parameters on the Tribological Properties of Ti DLC Films

Kurucu K., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Turkey, 25 - 27 June 2014, pp.56

Growth of Antibacterial Coatings by Plasma Electrolytic Oxidation

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., AYDIN K.

icadet, 21 - 23 September 2017

A study on wear rates of 100Cr6 steel running against sintered steel surfaces under dry and starved lubrication

Sarıibrahimoğlu K., Kızıl H., Akşit M., EFEOĞLU İ., Birol F.

The 47th Annual Conference of Metallurgists, COM 2008, Montreal, Canada, 2 - 06 August 2008, pp.1

Adhesion scratch testing on various TiN Coatings

ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2003, pp.1

The Effect of Pulse and Bias DC Voltage on Crystallization of TiNi Shape Memory Thin Films Deposited by Unbalanced Magnetron Sputtering

Çiçek H., EFEOĞLU İ., Baran Ö., TOTİK Y.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

Adhesin of Composite Structured TiTaBN Coatings Deposited by Magnetron Sputtering

EFEOĞLU İ., Baran Ö., Prakash B.

ICMCTF10, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

Friction and wear properties of MoS2-Ti composite solid lubricant deposited by pulsed-dc

EFEOĞLU İ., BÜLBÜL F., ÇELİK A.

3rd Int. Powder Metallurgy Conference, Ankara, Turkey, 3 September - 06 April 2002, pp.1

Tribological Properties of TiN/TaN and TiN/TaN Doped CrY Multilayer Coatings at High Temperature

EFEOĞLU İ., Baran Ö., Demirci E., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

The Effect of Deposition Parameters on the Wear and Scratch Properties of TiAlZrN Coatings

SERT Y., KÜÇÜKÖMEROĞLU T., KARA L., EFEOĞLU İ.

International Science Applications of Thin Films, Conference Exhibition (SATF 2018), 17 - 21 September 2018, vol.1, pp.13-21

Compearing of adhesion properties of TiNbVN coatings deposited on differant sunbstrates

EFEOĞLU İ., TOTİK Y., Baran Ö., KELEŞ A., Çiçek H.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

The Structural Properties of Ta Doped DLC coatings for the Dental Applications Using HiPIMS

EFEOĞLU İ., BARAN Ö., Urvasizoğlu G., KELEŞ A., ATAOL M., TOTİK Y., et al.

ISAMN2019 (3rd INTERNATIONALSYMPOSIUM on ADVANCED MATERIALS and NANOTECHNOLOGY), 19 - 20 August 2019

Characterization of Ti ve Nb Doped DLC Films Grown by Pulseddc PVD-Closed Field Unbalanced Magnetron Sputtering CFUBMS) Method

Uğur D., EFEOĞLU İ., Altıtaş S.

ASME /STLE International Joint Tribology Conferance, San Diago, United States Of America, 22 - 24 October 2007, pp.1

Detemining of the critical loads of transition metal nitrides on steels

KELEŞ A., Çiçek H., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF16, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

Effect of Target Voltage on Tribological and Adhesive Properties of c-BN Films Coated with HiPIMS

EFEOĞLU İ., KELEŞ A.

2019 IEEE Regional Symposium on Micro and Nanoelectronics(RSM 2019), 21 - 23 August 2019

Effect of crystallographic orientation on wear properties of MoS2-Ti coatings by pulsed-dc in nitrogen and humid air

ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2003, pp.1

The Effect of Metal Transition Dopents on Mechanical and Tribological Properties TiBCN Based Coatings Deposited by CFUBMS (Pulsed-dc+HiPIMS)

Efeoğlu İ., Aksakallı N., Gümüş B., Tan E.

47th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, United States Of America, 26 - 30 April 2021

The mechanical and tribological properties of Ti(Nb, V) N films on the 2024 Al-alloy

Baran Ö., KELEŞ A., Çiçek H., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Coatings

Küçükömeroğlu T., Baran Ö., EFEOĞLU İ., Kara L.

EUROMAT2015 European Congress and Exhibition on Advanced Materials and Process, Varsow, Poland, 20 - 24 September 2015

Evaluation of adhesion and fetigue behaviours of MoS2-Nb solid lubricant films

EFEOĞLU İ., ARSLAN E., Baran Ö., TOTİK Y.

E-MRS Spring Meeting, Strasborg, France, 28 May - 01 June 2007, pp.1

c-BN based BN Thin Film Synthesis and Investigation The Structural-Mechanical-Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A., Ersoy K., Durkaya G.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

Microstructures and tribological behaviours of plasma nitrided and nitrocarburized AISI5140 stee

EFEOĞLU İ., Alsaran A., KARAKAN M., BÜLBÜL F., ÇELİK A.

ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2003, pp.1

Mechanical and Tribological Characterization of Me (Nb,Ti)-DLC Films Grown by PVD-Closed Field Unbalanced magnetron Sputtering Method

Uğur D., EFEOĞLU İ., Altıntaş S.

EUROMAT2007 (European Congres and Exhibition on Advanced Materials and Progress), Nürenberg, Germany, 10 - 13 September 2007, pp.1

Characterization of titanium and niobium doped dlc films grown by pulsed DC PVD - Closed field unbalanced magnetron sputtering (CFUBMS) method

Ugur D., Efeoglu I., Altintas S.

ASME/STLE International Joint Tribology Conference, California, United States Of America, 22 - 24 October 2007, pp.917-919

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material

Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, United States Of America, 23 - 27 April 2018, pp.93

Tribological Behaviour of Ti:Ta-DLC Films Under Different Tribo-Test Conditions

EFEOĞLU İ., KELEŞ A., TOTİK Y., Cicek H., Sukuroglu E. E.

9th International Conference on Tribology (Balkantrib), Turkey, 13 - 15 September 2017, vol.295

Mechanical and Tribological Characterization of Me (Nb,Ti)-DLC Films Grown by PVD-Closed Field Unbalanced magnetron Sputtering Method

Uğur D., EFEOĞLU İ., Altıntaş S.

EUROMAT2007 (European Congres and Exhibition on Advanced Materials and Progress), Nürenberg, Germany, 10 - 13 September 2007, pp.1

Plazma Elektrolitik Oksidasyon Yöntemiyle Antibakteriyel Kaplamaların Büyütülmesi

Şüküroğlu S., Şüküroğlu E., TOTİK Y., EFEOĞLU İ., Aydın K.

ICADET, II. Int. Conf. On Advanced Engineering Technologies, Bayburt, Turkey, 21 - 29 September 2017

EXTRACTION OF COBALT FROM A FLOTATION TAILINGS IN DIFFERENT MINERAL ACIDS UNDER OXIDATIVE CONDITIONS

YAYLALI B., YAZICI E. Y., CELEP O., DEVECİ H.

15'th International Mineral Processing Symposium, İstanbul, Turkey, 19 - 21 October 2016

Studies on Coatings Process of Solid Lubricants: Growth and Characterization of MoS2 (Ti/Nb) Coatings” (Invated)

1st International Surface Treatment Symposium, İstanbul, Turkey, 15 - 18 June 2011, pp.1

Studies on Coatings Process of Solid Lubricants: Growth and Characterization of MoS2 (Ti/Nb) Coatings” (Invated)

1st International Surface Treatment Symposium, İstanbul, Turkey, 15 - 18 June 2011, pp.1

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFEOĞLU İ., Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, United States Of America, 23 - 27 April 2018, pp.87

Friction and wear properties of MoS2-Ti composite solid lubricant deposited by pulsed-dc

3rd Int. Powder Metallurgy Conference, Ankara, Turkey, 3 September - 06 April 2002, pp.1

High Temperature Wear Resistance of TiCrAlCN/TiAlN Multilayer PVD Coatings on M2 High Speed Steel

EFEOĞLU İ., Demirci E., Baran Ö., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

The Tribological Properties of TiAlN TiCrN Multilayer Coatings Produced by CFUBMS

LALOĞLU Ç., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Turkey, 25 - 27 June 2014, pp.55

Interfacial scratch adhesion behaviour of multilayered Ti(BN):Ti(MoS2) based PVD coatings

EFEOĞLU İ., Prakash B., Hardell J.

ICMCTF09, The 36th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 27 April - 01 May 2009, pp.1

Multi-pass sub-critical load testing of TiN coatings

ICMCTF2000, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 10 - 14 April 2000, pp.1

Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels

KELEŞ A., ÇİÇEK H., BARAN Ö., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 April 2017

Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., BİLGİN E. E., KELEŞ A., EFEOĞLU İ., KARA L.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.182

Tribocorrosion Properties of Metal Doped DLC Thin Films

ARSLAN E., TOTİK Y., EZİRMİK K. V., ŞÜKÜROĞLU E. E., ÇİÇEK H., KELEŞ A., et al.

The International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 18 - 23 May 2015

In-Situ X-ray diffraction studies of the structure of nitride thin films under various temperatures

EFEOĞLU İ., ÇELİK A., Arnell D.

ICMCTF99, Int. Conf. on Metallurgical Coatings and Thin Films9, San Diago, United States Of America, 12 - 15 April 1999, pp.1

Tribological characterization of Me(Nb-Ti)DLC films grown by pulsed-dc magnetron sputtering

EFEOĞLU İ., Uğur D., Baran Ö., ARSLAN E., Altıntaş S.

E-MRS Spring Meeting, Strasbourg, France, 26 - 30 May 2008, pp.1

MoS2 composite coatings deposited by closed field unbalanced magnetron sputter ion plating: Mechanical-Tribological-Structural Characterization

EFEOĞLU İ., ARSLAN E., BÜLBÜL F.

ICCE/8, Tenerife Island, Spain, 5 - 11 August 2001, pp.1

Kendinden Yağlayıcı Katı İnce Filmler DLC MoS2 ve h BN Esaslı İnce Filmler Üzerine Ar Ge Çalışmaları

ASELSAN 1. Malzeme Teknolojileri Çalıştayı, Turkey, 14 - 15 September 2015

MoS2-Ti composite solid lubricant deposited by biased-dc and pulsed-dc

EFEOĞLU İ., BÜLBÜL F., ARSLAN E.

ICMCMTF02, Int. Conf. on Metallurgical Coatings and Thin Films0, San Diago, United States Of America, 22 - 26 April 2002, pp.1

Comparison of Functional Composite Thin Films Deposited by CFUBMS-PVD Using Different Power Sources

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.242-243

Friction and Wear Properties of Ti:Ta Doped DLC Coatings

EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E., KELEŞ A., Demirci E.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 20 - 24 April 2015

Friction and Wear Characteristics of Me-DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., Çiçek H., Demirci E., EZİRMİK K. V.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

Structural, Mechanical and Tribological Properties of TiTaBN CompositeGraded Coatings Deposited by CFUBMS Technique

ICMCTF2012, 39th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 23 - 27 April 2012, pp.1

Tribological Properties of TiN/TaN and TiN/TaN Doped CrY Multilayer Coatings at High Temperature

EFEOĞLU İ., Baran Ö., Demirci E., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

Mechanical and tribological properties of multilayered-composite solid lubricant films

E-MRS Coference, Varşova, Poland, 4 - 08 September 2006, pp.1

Detemining of the critical loads of transition metal nitrides on steels

KELEŞ A., Çiçek H., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF16, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

A comparative study of fatique properties of TiVN and TiNbN thin films deposited on differant substrates

Çiçek H., Baran Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, United States Of America, 23 - 28 April 2017

The investigation of Scratch Behavior of Composed Structured TiBN Hard Films Deposited on Cold Work Tool Steel at The Different Nitrogen Rates

Çiçek H., Baran Ö., TOTİK Y., ARSLAN E., EFEOĞLU İ.

ICMCTF10, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

Adhesin of Composite Structured TiTaBN Coatings Deposited by Magnetron Sputtering

EFEOĞLU İ., Baran Ö., Prakash B.

ICMCTF10, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

Deposition and characterization of metal/diamond-like carbon (Me/DLC) thin films prepared by closed-field unbalanced magnetron sputtering

ESF Exploratory Workshop on Carbon-Based Nanostructured Composite Film, Gdansk, Poland, 30 August - 01 September 2006, pp.1

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFEOĞLU İ., Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, United States Of America, 23 - 27 April 2018, pp.87

WEAR PERFORMANCE OF TITANIUM AND NIOBIUM ADDED MOS(2) COATINGS UNDER ISOBUTANE EXPOSURE

Aksit M. F., KIZIL H., Efeoglu I., SARIIBRAHIMOGLU K.

ASME/STLE International Joint Tribology Conference, Tennessee, United States Of America, 19 - 21 October 2009, pp.265-267

Savunma Teknolojilerinde Yüzey Mühendisliği ve Ar Ge Çalışmaları

Mühendislikte Yeni Teknolojiler Sempozyumu, Turkey, 22 - 24 October 2015

Tribological Properties in Different Test Conditions of Thin Films TiTaBN Deposited by CFUBMS

KÜÇÜKOSMAN R., ŞÜKÜROĞLU S., ŞÜKÜROĞLU E. E., TOTİK Y.

ICMCTF10, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

Investigation of Corrosion Properties in TiAlN/TiCrN Multilayer Coatings Deposited by CFUBMS

Demirci E., Baran Ö., TOTİK Y., EFEOĞLU İ., Tahmasabian M.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

The Effect of Graphite Particle Addition to Plasma Electrolytic Oxidation (PEO) Coatings on AZ91 Magnesium Alloy

International Conference on Advanced Engineering Technologies, 19 - 21 September 2019

Adhesion scratch testing on various TiN Coatings

ICMCTF03, Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2003, pp.1

Fetigue and Adhesion Properties of Martenzite and Austinite Phases of TiNi Shape Memory Thin Film Deposited by Magnetron Sputtering

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V.

ICMCTF, 25 May 2016

Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., BİLGİN E. E., KELEŞ A., EFEOĞLU İ., KARA L.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.182

TiCN KAPLAMALARIN YAPISAL VE MEKANİK ÖZELLİKLERİNE Ta’NIN ETKİSİ

çavlan s., BARAN Ö., KELEŞ A., EFEOĞLU İ.

V. Uluslararası Mühendislik ve Mimarlık Kongresi 2019, 21 - 22 December 2019

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material

Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, United States Of America, 23 - 27 April 2018, pp.93

Influence Target Voltage on The Mechanical and Tribological Properties of c-BN Films Coated with HiPIMS

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

International Symposium on Boron (BORON2019) Nevşehir Hacı Bektaş Veli University, Nevşehir, Turkey, 17 - 19 April 2019

Mekanik Alaşımlama Yöntemi ile Üretilen AA2014/Al2O3 Kompozit Malzemesinin Yaşlandırma İşlemi ile Mikro Yapı ve Mekanik Özelliklerinin Geliştirilmesi

YILMAZ T. A., BOSTAN B., YALÇIN N., GÖKMEŞE H.

7. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, Ankara, Turkey, 24 - 28 June 2014, pp.38-39

Investigation of In-Vitro Properties NiTi After MAO Coatings

Şüküroğlu S., TOTİK Y., Demirci E., ARSLAN E., EFEOĞLU İ.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

Friction and Wear Properties of Ti:Ta Doped DLC Coatings

EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E., KELEŞ A., Demirci E.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 20 - 24 April 2015

Friction and Wear Characteristics of Me-DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., Çiçek H., Demirci E., EZİRMİK K. V.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

The Mechanical and Corrosion Properties of TaN Thin Films Coated on Ti6Al4V Using Pulsed-dc Magnetron Sputtering

Gülten G., Yılmaz T. A., Totik Y., Efeoğlu İ.

International Online Conferences on Engineering and Natural Sciences IOCENS'21, Gümüşhane, Turkey, 05 July 2021

The Effect of TiO2 Coatings on NiTİ Alloys After MAO Treatment for Corrosion Resistance

Akar K., TOTİK Y., EFEOĞLU İ., Demirci E., ARSLAN E., Şüküroğlu S.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

EKAP Yöntemi ile AA7075 Alaşımının Sertlik ve Mikroyapısal Özelliklerinin Araştırılması

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), 21 - 23 June 2019

Toz Metalurjisi Yöntemiyle Üretilmiş AA7075 Taban Malzeme Üzerine Kaplanan MoS2-TiB2 Kompozit Filmin Yapısal, Mekanik ve Tribolojik Özelliklerinin Araştırılması

YILMAZ T. A., LÜLE ŞENÖZ G. M., EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Turkey, 22 - 24 March 2018, pp.236-237

The Tribological Properties of TiAlN TiCrN Multilayer Coatings Produced by CFUBMS

LALOĞLU Ç., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Turkey, 25 - 27 June 2014, pp.55

Investigation of Adhesion and Corrosion Properties of CrAlYN CrY Multilayer Coatings Deposited by Unbalanced Magnetron Sputtering

Tahmasebian Myandoab M., EFEOĞLU İ., EZİRMİK K. V., ARSLAN E., TOTİK Y., Şüküroğlu E. E., et al.

International Conference on MetallurgicalCoatings and Thin Films ICMCTF 2014, San Diego, United States Of America, 28 April - 02 May 2014, pp.55

Study Of Structural and Mechanical Properties Of CrAlYN/CrY Multilayer Thin Film Deposited On M2 Steel

Tahmasabian M., EFEOĞLU İ., EZİRMİK K. V., TOTİK Y., Demirci E., Baran Ö.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

Structural, Mechanical and Tribological Properties of VN Thin Films Fabricated by PVD

Aghdam H., EFEOĞLU İ., EZİRMİK K. V., Çiçek H., Tahmasabian M., Baran Ö.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 - 02 April 2014

The Effect of TiO2 Coatings on NiTİ Alloys After MAO Treatment for Corrosion Resistance

Akar K., TOTİK Y., EFEOĞLU İ., Demirci E., ARSLAN E., Şüküroğlu S.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 25 - 29 April 2016

Neutralization of Sulphurous Waste AMD Using Recycled Waste Concrete

Tozsin G., Deveci H., Koç E., Yaylalı B.

ICEWRM 2016 : 18th International Conference on Environment and Water Resource Management, Antalya, Turkey, 11 - 12 August 2016, vol.3, pp.1835-1845

The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

Baran Ö., Bidev F., Çiçek H., Kara L., EFEOĞLU İ., Küçükömeroğlu T.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

The Mechanical and Tribological Properties of Boron Based Films Grown by HiPIMS Under Different N2 Contents”,

KELEŞ A., EFEOĞLU İ., TOTİK Y.

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films, TownCountry Convention Center,San Diego,CA,USA, 19 - 24 May 2019

Deposition and characterization of nano-structured Mos2-Ti composite thin films prepared by CFUBMS

NanoTR-I, Nano Science and NanoTechnology Conference, Ankara, Turkey, 25 May - 27 April 2005, pp.1

The Investigation of the Adhesion, Wear and Friction Properties of TiN/TaN Multilayer Coatings

Baran Ö., Demirci E., EFEOĞLU İ., TOTİK Y.

ICMCTF13, 40th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 29 April - 03 May 2013

Tribological Properties in Different Test Conditions of Thin Films TiTaBN Deposited by CFUBMS

ICMCTF10, 37th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 26 - 30 April 2010, pp.1

The investigation of fatigue behaviour using multi-mode scratch test of TiB2 films deposited by CFUBMS

TOTİK Y., ARSLAN E., EFEOĞLU İ., KAYMAZ İ.

NORDRIB 2008, 13th Nordic Symposium on Tribology, Tempere, Finland, 10 - 13 June 2008, pp.1

The Effect of Pulse and Bias DC Voltage on Crystallization of TiNi Shape Memory Thin Films Deposited by Unbalanced Magnetron Sputtering

Çiçek H., EFEOĞLU İ., Baran Ö., TOTİK Y.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, United States Of America, 28 April - 02 May 2014

Tribocorrosion Properties of MAO DLC Coatings Using a DuplexProcess on Cp Ti Alloys

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., ARSLAN E., TOTİK Y., EFEOĞLU İ.

The International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 18 - 23 May 2015

Tribological behavior of sintered steel under starved lubrication in R600A environment

Sarıibrahimoğlu K., Kızıl H., Akşit M., EFEOĞLU İ., Kerpiççi H.

2nd International Conference on Advanced Tribology, iCAT 2008, Singapur: iCAT 2008, Singapur, Singapore, 1 - 04 September 2008, pp.1

Structural Mechanical and Tribological Properties of VN Thin FilmsFabricated by PVD

Aghdam H., EFEOĞLU İ., EZİRMİK K. V., ÇİÇEK H., Tahmasebian Myandoab M., BARAN Ö.

International Conference on MetallurgicalCoatings and Thin Films ICMCTF 2014, San Diego, United States Of America, 28 April - 02 May 2014, pp.44

Episodes in the Encyclopedia

Encyclopedia of Tribology