Prof. Dr. İhsan EFEOĞLU

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.231, sa.8, ss.699-704, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

The effect of plasma electrolytic oxidation process parameters on the tribocorrosion properties of TiO2 coatings

Sukuroglu E. E., FARZI H., Sukuroglu S., TOTİK Y., ARSLAN E., EFEOĞLU İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.31, sa.12, ss.1361-1373, 2017 (SCI-Expanded)

Fatigue and adhesion properties of martensite and austenite phases of TiNi shape memory thin films deposited by magnetron sputtering

Cicek H., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.308, ss.174-181, 2016 (SCI-Expanded)

Synergistic effect of bias and target currents for magnetron sputtered MoS2-Ti composite films

Bulbul F., Efeoglu I.

MATERIALS TESTING , cilt.58, sa.5, ss.471-474, 2016 (SCI-Expanded)

The investigation of adhesion and fatigue properties of TiN/TaN multilayer coatings

BARAN Ö., Sukuroglu E. E., EFEOĞLU İ., TOTİK Y.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.30, sa.20, ss.2188-2200, 2016 (SCI-Expanded)

A low temperature in-situ crystalline TiNi shape memory thin film deposited by magnetron sputtering

Cicek H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E.

SURFACE & COATINGS TECHNOLOGY , cilt.284, ss.90-93, 2015 (SCI-Expanded)

Adhesion and tribological properties of TiTaBN coatings with a graded interlayer deposited by pulsed DC biased and continuous dc biased magnetron sputtering

BARAN Ö., EFEOĞLU İ., Hardell J., Prakash B.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.29, sa.18, ss.2006-2019, 2015 (SCI-Expanded)

Investigation of the friction and wear properties of Ti/TiB2/MOS2 graded-composite coatings deposited by CFUBMS under air and vacuum conditions

BARAN Ö., BIDEV F., Cicek H., Kara L., EFEOĞLU İ., KÜÇÜKÖMEROĞLU T.

SURFACE & COATINGS TECHNOLOGY , cilt.260, ss.310-315, 2014 (SCI-Expanded)

The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel

Cicek H., BARAN Ö., DEMIRCI E. E., TAHMASEBIAN M., TOTİK Y., EFEOĞLU İ.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.28, sa.12, ss.1140-1148, 2014 (SCI-Expanded)

Microstructure, Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Kara L., KÜÇÜKÖMEROĞLU T., BARAN Ö., EFEOĞLU İ., YAMAMOTO K.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE , sa.4, ss.2123-2131, 2014 (SCI-Expanded)

Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TiAlN thin film

Yildiz F., Yetim A. F., ALSARAN A., ÇELİK A., Kaymaz I., EFEOĞLU İ.

TRIBOLOGY INTERNATIONAL , cilt.66, ss.307-314, 2013 (SCI-Expanded)

Adhesion and fatigue properties of Ti/TiB2/MoS2 graded-composite coatings deposited by closed-field unbalanced magnetron sputtering

BIDEV F., BARAN Ö., ARSLAN E., TOTİK Y., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.215, ss.266-271, 2013 (SCI-Expanded)

Investigation of wear, corrosion and tribocorrosion properties of AZ91 Mg alloy coated by micro arc oxidation process in the different electrolyte solutions

DEMIRCI E. E., ARSLAN E., EZİRMİK K. V., BARAN Ö., TOTİK Y., EFEOĞLU İ.

THIN SOLID FILMS , cilt.528, ss.116-122, 2013 (SCI-Expanded)

Wear and adhesion resistance of duplex coatings deposited on Ti6Al4V alloy using MAO and CFUBMS

ARSLAN E., TOTİK Y., DEMIRCI E. E., EFEOĞLU İ.

SURFACE & COATINGS TECHNOLOGY , cilt.214, ss.1-7, 2013 (SCI-Expanded)

The investigation of the tribocorrosion properties of DLC coatings deposited on Ti6Al4V alloys by CFUBMS

ARSLAN E., TOTİK Y., EFEOĞLU İ.

PROGRESS IN ORGANIC COATINGS , cilt.74, sa.4, ss.768-771, 2012 (SCI-Expanded)

STRESS-RELIEF SOLUTIONS FOR BRITTLE TiB2 COATINGS

Bulbul F., EFEOĞLU İ.

SURFACE REVIEW AND LETTERS , cilt.19, sa.4, 2012 (SCI-Expanded)

Comparison of structure and tribological properties of MoS2-Ti films deposited by biased-dc and pulsed-dc

ARSLAN E., TOTİK Y., EFEOĞLU İ.

PROGRESS IN ORGANIC COATINGS , cilt.74, sa.4, ss.772-776, 2012 (SCI-Expanded)

Tribological properties of composite multilayer coating

GEBRETSADIK D., HARDELL J., EFEOĞLU İ., PRAKASH B.

Tribology - Materials, Surfaces and Interfaces , cilt.5, sa.3, ss.100-106, 2011 (SCI-Expanded)

Corrosion behaviour of Ti DLC deposition on prenitrided 316L stainless steel and Ti-6Al-4V alloy

YETİM A., ALSARAN A., ÇELİK A., EFEOĞLU İ.

CORROSION ENGINEERING SCIENCE AND TECHNOLOGY , cilt.46, sa.4, ss.439-444, 2011 (SCI-Expanded)

Deposition and Adhesion Characterization of Ti(BN:MoS2) Based Composite Thin Films Prepared by Closed-Field Unbalanced Magnetron Sputtering

YETIM A. F., EFEOĞLU İ., ÇELİK A., Alsaran A., Kaymaz I.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , cilt.25, sa.13, ss.1497-1505, 2011 (SCI-Expanded)

The wear behaviour of duplex treated AISI 5140 steel

TOTİK Y., Alsaran A., ÇELİK A., EFEOĞLU İ.

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.63, sa.5, ss.344-349, 2011 (SCI-Expanded)

MoS2-Ti composite films having (002) orientation and low Ti content

Bulbul F., EFEOĞLU İ.

CRYSTALLOGRAPHY REPORTS , cilt.55, sa.7, ss.1177-1182, 2010 (SCI-Expanded)

Effect of annealing on adhesion of TiB2 films deposited by pulsed magnetron sputtering

ARSLAN E., TOTİK Y., ÇELİK A., EFEOĞLU İ.

SURFACE ENGINEERING , cilt.26, sa.8, ss.567-570, 2010 (SCI-Expanded)

Multipass scratch test behaviour of TiAlN thin film deposited on 316L stainless steel and Ti6Al4V alloy with dc biased and pulsed magnetron sputtering

YILDIZ F., ALSARAN A., ÇELİK A., EFEOĞLU İ.

SURFACE ENGINEERING , cilt.26, sa.8, ss.578-583, 2010 (SCI-Expanded)

The effect of TiC transient layer on a DLC-based functionally gradient coating prepared by closed field unbalanced magnetron sputtering plating system

Bulbul F., EFEOĞLU İ.

METALS AND MATERIALS INTERNATIONAL , cilt.16, sa.4, ss.573-580, 2010 (SCI-Expanded)

Effect of R600a on tribological behavior of sintered steel under starved lubrication

Sariibrahimoglu K., Kızıl H., Aksit M. F., EFEOĞLU İ., KERPICCI H.

TRIBOLOGY INTERNATIONAL , cilt.43, ss.1054-1058, 2010 (SCI-Expanded)

Characterization of Ti-CN-a:C films prepared by pulsed-dc bias sputtering

Bulbul F., EFEOĞLU İ.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.224, ss.677-684, 2010 (SCI-Expanded) Sürdürülebilir Kalkınma

High temperature friction and wear behavior of MoS(2)/Nb coating in ambient air

ARSLAN E., TOTİK Y., BAYRAK O. Ü., EFEOĞLU İ., ÇELİK A.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH , cilt.7, sa.1, ss.131-137, 2010 (SCI-Expanded)

High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation

ARSLAN E., TOTİK Y., DEMİRCİ E., Vangolu Y., ALSARAN A., EFEOĞLU İ.

Surface and Coatings Technology , cilt.204, ss.829-833, 2009 (SCI-Expanded)

Wear and corrosion behaviour of various surface treated medical grade titanium alloy in bio-simulated environment

YILDIZ F., YETİM A., ALSARAN A., EFEOĞLU İ.

WEAR , cilt.267, ss.695-701, 2009 (SCI-Expanded)

CHARACTERIZATION OF TiB2 COATING ADHERENCE BY A MULTI-PASS SCRATCH TESTING

TOTİK Y., ARSLAN E., EFEOĞLU İ., Kaymaz I.

SURFACE REVIEW AND LETTERS , cilt.16, sa.3, ss.329-335, 2009 (SCI-Expanded)

Tribological characteristics of MoS2-Nb solid lubricant film in different tribo-test conditions

EFEOĞLU İ., Baran O., YETIM F., Altintas S.

SURFACE & COATINGS TECHNOLOGY , cilt.203, ss.766-770, 2008 (SCI-Expanded)

Evaluation of adhesion and fatigue of MoS2-Nb solid-lubricant films deposited by pulsed-dc magnetron sputtering

ARSLAN E., BARAN O., EFEOĞLU İ., TOTİK Y.

SURFACE & COATINGS TECHNOLOGY , cilt.202, sa.11, ss.2344-2348, 2008 (SCI-Expanded)

A comparative study: The effect of surface treatments on the tribological properties of Ti-6Al-4V alloy

YETİM A., ALSARAN A., EFEOĞLU İ., ÇELİK A.

SURFACE & COATINGS TECHNOLOGY , cilt.202, sa.11, ss.2428-2432, 2008 (SCI-Expanded)

Deposition and characteriztion of a multilayered-composite solid lubricant coating

Efeoglu I.

REVIEWS ON ADVANCED MATERIALS SCIENCE , cilt.15, sa.2, ss.87-94, 2007 (SCI-Expanded)

The effect of bias voltage and working pressure on S/Mo ratio at MoS2-Ti composite films

BULBUL F., Efeoglu I., Arslan E.

APPLIED SURFACE SCIENCE , cilt.253, sa.9, ss.4415-4419, 2007 (SCI-Expanded)

Fatigue behaviour of duplex treated AISI 316L stainless steel

Celik A., ARSLAN Y., YETIM A. F., Efeoglu I.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.45, sa.1, ss.35-40, 2007 (SCI-Expanded)

The investigation of structural, mechanical and tribological properties of plasma nitrocarburized AISI 1020 steel

Celik A., Karakan M., ALSARAN A., Efeoglu I.

SURFACE & COATINGS TECHNOLOGY , cilt.200, ss.1926-1932, 2005 (SCI-Expanded)

Co-sputtered Mo : S : C : Ti : B based coating for tribological applications

Efeoglu I.

SURFACE & COATINGS TECHNOLOGY , cilt.200, ss.1724-1730, 2005 (SCI-Expanded)

The effect of deposition parameters and Ti content on structural and wear properties of MOS2-Ti coatings

Arslan E., BULBUL F., ALSARAN A., Celik A., Efeoglu I.

WEAR , cilt.259, ss.814-819, 2005 (SCI-Expanded)

Effect of crystallographic orientation on the friction and wear properties of MoxSy-Ti coatings by pulsed-dc in nitrogen and humid air

Efeoglu I., BULBUL F.

WEAR , cilt.258, ss.852-860, 2005 (SCI-Expanded)

Effect of heat treatment of TiN films deposited by CFUBMS

Arslan E., Efeoglu I.

MATERIALS CHARACTERIZATION , cilt.53, sa.1, ss.29-34, 2004 (SCI-Expanded)

Optimization of coating parameters for duplex treated AISI 5140 steel

ALSARAN A., Celik A., CELIK C., Efeoglu I.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.371, ss.141-148, 2004 (SCI-Expanded)

The structural and tribological properties of MoS2-Ti composite solid lubricants

Arslan E., BULBUL F., Efeoglu I.

TRIBOLOGY TRANSACTIONS , cilt.47, sa.2, ss.218-226, 2004 (SCI-Expanded)

Study on compound layer formed during plasma nitrocarburizing of AISI 5140 steel

ALSARAN A., Karakan M., Celik A., BULBUL F., Efeoglu I.

JOURNAL OF MATERIALS SCIENCE LETTERS , cilt.22, sa.24, ss.1759-1761, 2003 (SCI-Expanded)

An investigation of the relationship between heat treatment and microstructure in (TiAlV)N and (TiAl)N ceramic films

Totik Y., Efeoglu I., Gavgali M., Sadeler R.

MATERIALS CHARACTERIZATION , cilt.47, sa.1, ss.55-60, 2001 (SCI-Expanded)

Mechanical and structural properties of AISI 8620 steel TiN coated, nitrided and TiN coated plus nitrided

Efeoglu I., Celik A.

MATERIALS CHARACTERIZATION , cilt.46, sa.4, ss.311-316, 2001 (SCI-Expanded)

Microstructure and structural behavior of ion-nitrided AISI 8620 steel

Celik A., Efeoglu I., SAKAR G.

MATERIALS CHARACTERIZATION , cilt.46, sa.1, ss.39-44, 2001 (SCI-Expanded)

Multi-pass sub-critical load testing of titanium nitride coatings

Efeoglu I., ARNELL R.

THIN SOLID FILMS , cilt.377, ss.346-353, 2000 (SCI-Expanded)

DEPOSITION OF WEAR-RESISTANT COATINGS BASED ON DIAMOND-LIKE CARBON BY UNBALANCED MAGNETRON SPUTTERING

MONAGHAN D., TEER D., LOGAN P., EFEOGLU I., ARNELL R.

SURFACE & COATINGS TECHNOLOGY , cilt.60, ss.525-530, 1993 (SCI-Expanded)

DEPOSITION OF GRADED ALLOY NITRIDE FILMS BY CLOSED FIELD UNBALANCED MAGNETRON SPUTTERING

MONAGHAN D., TEER D., LAING K., EFEOGLU I., ARNELL R.

SURFACE & COATINGS TECHNOLOGY , cilt.59, ss.21-25, 1993 (SCI-Expanded)

THE EFFECT OF THE CONDITION OF THE SCRATCH DIAMOND ON MEASURED CRITICAL LOADS

ARNELL R., EFEOGLU I.

VACUUM , cilt.44, sa.8, ss.805-807, 1993 (SCI-Expanded)

ION-ASSISTED CVD OF GRADED DIAMOND-LIKE CARBON (DLC) BASED COATINGS

MONAGHAN D., TEER D., ARNELL R., EFEOGLU I., AHMED W.

JOURNAL DE PHYSIQUE IV , cilt.3, ss.579-587, 1993 (SCI-Expanded)

THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF TITANIUM ALUMINUM NITRIDE COATINGS FORMED IN A 4 MAGNETRON CLOSED-FIELD SPUTTERING SYSTEM

EFEOGLU I., ARNELL R., TINSTON S., TEER D.

SURFACE & COATINGS TECHNOLOGY , cilt.57, ss.117-121, 1993 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

The Influence of TiC Dispersion and Density on the Microstructural Features and Microhardness Fused by TIG Arc Process

Maleque M. A., Idriss A. N. M., Naping R., Rahman M. M., EFEOĞLU İ.

Journal of Advanced Research in Applied Mechanics , cilt.114, sa.1, ss.33-42, 2024 (Scopus)

Investigation of the Effect of Heat Treatments at Different Temperatures on the Crystal Structure of Titanium-Nickel Films

ÇİÇEK H., AKAR O. C., EFEOĞLU İ.

Journal of the Institute of Science and Technology , cilt.11, ss.526-534, 2021 (Hakemli Dergi)

Farklı Sıcaklıklarda Yapılan Isıl İşlemlerin Titanyum-Nikel Filmlerin Kristal Yapısına Etkisinin Araştırılması

Çiçek H., Can Akar O., Efeoğlu İ.

Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.11, sa.1, ss.526-534, 2021 (Hakemli Dergi)

The Structural and Mechanical Properties of MoS2-TiB2 Coated on AA7075 Produced by Powder Metallurgy Method

Yılmaz T. A., Keles A., Lule Senoz G. M., Totik Y., Efeoglu İ.

Brilliant Engineering , cilt.1, sa.2, ss.21-24, 2020 (Hakemli Dergi)

Quantification of the Effects of Coating Parameters on the Properties of TiAlZrN Coatings

Sert Y., Küçükömeroğlu T., Efeoğlu İ.

Brilliant Engineering , sa.4, ss.1-8, 2020 (Hakemli Dergi)

Determining Optimum Parameters for Adhesion Properties of Ta-DLC Films Using Taguchi Experimental Design

Keleş A., Baran Ö., Urvasızoğlu G., Ataol M., Totik Y., Ertaş Ü., et al.

Brilliant Engineering , cilt.1, sa.1, ss.1-6, 2020 (Hakemli Dergi)

THE STRUCTURAL PROPERTIES OF Ta DOPED DLC COATINGS FOR THE DENTAL APPLICATIONS USING HiPIMS

EFEOĞLU İ., BARAN Ö., URVASIZOĞLU G., KELEŞ A., ATAOL M., TOTİK Y., et al.

Solid State Science and Technology , cilt.27, sa.1, ss.68-74, 2020 (Hakemli Dergi)

The Effect of Cu doping on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.13, sa.1, ss.181-189, 2020 (Hakemli Dergi)

Effect of Target Voltage on Tribological andAdhesive Properties of c-BN Films Coated withHiPIMS

KELEŞ A., EFEOĞLU İ.

2019 IEEE Regional Symposium on Micro and Nanoelectronics (RSM) , 2019 (Scopus)

Synthesis and investigation of structural-mechanical-tribological properties of c-BN based BN thin films

EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

Bor Dergisi , cilt.2, ss.11-17, 2017 (Hakemli Dergi)

Plazma ile nitrürleme ve mangan fosfat kaplama işleminin AISI 5140 çeliğinin aşınma davranışı üzerine etkisi

Totik Y., Alsaran A., Yetim A. F., Efeoğlu İ.

Mühendis ve Makina , cilt.50, sa.595, ss.34-38, 2009 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Adhesion and Friction-wear Characterization of Wdoped Hydrogenated Diamond-like Carbon (a-C:H) Coatings

Efeoğlu İ., Totik Y., Gülten G., Yaylalı B., Yeşilyurt M., Günay R., et al.

50th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2024), California, Amerika Birleşik Devletleri, 19 Mayıs 2023 - 24 Mayıs 2024, ss.40, (Özet Bildiri)

Wear and Corrosion Characterization and Parametric Optimization of Nb-doped Hydrogenated Diamond-like Carbon (a-C:H) Coatings

Efeoğlu İ., Totik Y., Gülten G., Yaylalı B., Yeşilyurt M., Günay R., et al.

50th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2024) , California, Amerika Birleşik Devletleri, 19 - 24 Mayıs 2024, ss.99, (Özet Bildiri)

Effect Of Different Annealing Temperatures On Mechanical, Tribological, And Adhesion Properties Of Tialniv-(N) High Entropy Alloy Films

Yılmaz A. M., Çiçek H., Duran S., Gülten G., Efeoğlu İ.

1. BİLSEL INTERNATIONAL KORYKOS SCIENTIFIC RESEARCHES AND INNOVATION CONGRESS, Mersin, Türkiye, 27 - 28 Ocak 2024, cilt.1, sa.1, ss.1, (Özet Bildiri)

Production of MAX Phase Ti2AlN Coatings and Investigation of Structural and Tribological Properties

Çakır M., Çiçek H., Duran S., Yılmaz A. M., Gülten G., Efeoğlu İ.

1. BILSEL INTERNATIONAL AHLAT SCIENTIFIC RESEARCHES CONGRESS, Bitlis, Türkiye, 15 - 16 Ağustos 2023, ss.1-5, (Tam Metin Bildiri)

Influence of Nb and Ta on the corrosion and mechanical properties of CrYN coatings

Yaylalı B., Gülten G., Efeoğlu İ., Totik Y., Kelly P., Kulczyk-Malecka J.

49th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, Amerika Birleşik Devletleri, 21 - 26 Mayıs 2023, ss.1-15, (Tam Metin Bildiri)

Effect of Nb and V Doped Elements on the Mechanical and Tribological Properties of CrYN Coatings

Gülten G., Yaylalı B., Efeoğlu İ., Totik Y., Kelly P., Kulczyk-Malecka J.

49th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, Amerika Birleşik Devletleri, 21 - 26 Mayıs 2023, ss.1-15, (Tam Metin Bildiri)

Deposition of Nb Doped CrYN Thin Films: Investigation of Structural, Mechanical and Tribological Properties

Yuksel F., GÜLTEN G., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.251-257, (Tam Metin Bildiri)

Wear and Corrosion of Ceramic Coated Metallic Surface in Presence of Biodiesel

Maleque M. A., Hassan M., Cetin S. Y., EFEOĞLU İ., Rahman M. M.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.207-213, (Tam Metin Bildiri)

The Effect of LaB6 Target Current on Mechanical and Tribological Properties LaB6 Doped TiBCN Based Films Deposited by CFUBMS-HiPIMS

Aksakalli N., EFEOĞLU İ., Gumus B., Tan E.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.221-227, (Tam Metin Bildiri)

Synthesis and Characterization of Ta/TaN Coatings with CFUBMS-HiPIMS Technology

Polat M. A., GÜLTEN G., TOTİK Y., Maleque M. A., Masjuki H. H., Çetin S. Y., et al.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.273-279, (Tam Metin Bildiri)

Annealing Effect on Nb Additive CrYN Thin Films Deposited by Magnetron Sputtering

YAYLALI B., GÜLTEN G., YEŞİLYURT M., Yüksel F., POLAT M., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.259-265, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of LaB6 Thin Films Deposited by Closed-Field Unbalanced Magnetron Sputtering

GÜLTEN G., YEŞİLYURT M., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, ss.245-250, (Tam Metin Bildiri)

Investigation of the Wear Behavior of Forging Tool by Ball on Disc and Impact Sliding Tribometer

SERT Y., KÜÇÜKÖMEROĞLU T., KAHRAMANZADE H., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, (Tam Metin Bildiri)

The Structural, Mechanical and Tribological Properties of LaB6 Thin Films Deposited by Closed-Field Unbalanced Magnetron Sputtering

GÜLTEN G., YEŞİLYURT M., YAYLALI B., TOTİK Y., EFEOĞLU İ.

5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME) 2022, Kuala-Lumpur, Malezya, 9 - 10 Ağustos 2022, (Tam Metin Bildiri)

Synthesis of Nb and Zr Added TiCN:TiBN Composite Coatings with CFUBMS-HiPIMS Technology and Investigation of Mechanical Properties

Efeoğlu İ.

5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2022), 9 - 10 Ağustos 2022, (Özet Bildiri)

The Effect of Nb/ Zr Target Voltage on Mechanical Properties TiBCN Based Films Deposited by CFUBMS- HiPIMS

EFEOĞLU İ., AKSAKALLI N., GÜMÜŞ B., TAN E.

WORLD CONGRESS ON APPLIED NANOTECHNOLOGY, Erzurum, Türkiye, 24 - 26 Kasım 2021, (Tam Metin Bildiri)

The Mechanical and Corrosion Properties of TaN Thin Films Coated on Ti6Al4V Using Pulsed-dc Magnetron Sputtering

Gülten G., Yılmaz T. A., Totik Y., Efeoğlu İ.

International Online Conferences on Engineering and Natural Sciences IOCENS'21, Gümüşhane, Türkiye, 05 Temmuz 2021, (Özet Bildiri)

WEAR PERFORMANCE OF NEW DESİGNED h-BN Based PVD COATINGS

SERT Y., YEŞİLYURT M., GÜNAYDIN O., KÜÇÜKÖMEROĞLU T., EMİR L. T., EFEOĞLU İ.

4. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC'21), Nevşehir, Türkiye, 25 - 28 Mayıs 2021, (Özet Bildiri)

The Effect of Metal Transition Dopents on Mechanical and Tribological Properties TiBCN Based Coatings Deposited by CFUBMS (Pulsed-dc+HiPIMS)

Efeoğlu İ., Aksakallı N., Gümüş B., Tan E.

47th International Conference on Metallurgical Coatings and Thin Films-ICMCTF, California, Amerika Birleşik Devletleri, 26 - 30 Nisan 2021, (Yayınlanmadı)

Investigation of Hardness and Microstructural Properties of AA7075 Alloy by ECAP Method

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC 2019), 21 - 23 Haziran 2019, ss.1157-1159, (Tam Metin Bildiri)

TiCN KAPLAMALARIN YAPISAL VE MEKANİK ÖZELLİKLERİNE Ta’NIN ETKİSİ

çavlan s., BARAN Ö., KELEŞ A., EFEOĞLU İ.

V. Uluslararası Mühendislik ve Mimarlık Kongresi 2019, 21 - 22 Aralık 2019, (Tam Metin Bildiri)

EKAP Yöntemi ile C Rotası Kullanılarak AA7075 Alaşımının Mikroyapısal Özelliklerinin Araştırılması

Yılmaz T. A., Totik Y., Lule Senoz G. M., Efeoğlu İ.

The International Alumınıum-Themed Engineering and Natural Sciences Conference in Seydişehir/TURKEY (IATENS’19), Konya, Türkiye, 4 - 06 Ekim 2019, ss.544-546, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

Effect of Target Voltage on Tribological and Adhesive Properties of c-BN Films Coated with HiPIMS

EFEOĞLU İ., KELEŞ A.

2019 IEEE Regional Symposium on Micro and Nanoelectronics(RSM 2019), 21 - 23 Ağustos 2019, (Tam Metin Bildiri)

The Structural Properties of Ta Doped DLC coatings for the Dental Applications Using HiPIMS

EFEOĞLU İ., BARAN Ö., Urvasizoğlu G., KELEŞ A., ATAOL M., TOTİK Y., et al.

ISAMN2019 (3rd INTERNATIONALSYMPOSIUM on ADVANCED MATERIALS and NANOTECHNOLOGY), 19 - 20 Ağustos 2019, (Tam Metin Bildiri)

Structural and Mechanical Properties of TiNi Coatings Deposited With Magnetron Sputtering Method at Different Coating Parameters

ÇİÇEK H., AKAR O. C., EFEOĞLU İ.

IMSEC-2019, 25 - 27 Nisan 2019, (Tam Metin Bildiri)

EKAP Yöntemi ile AA7075 Alaşımının Sertlik ve Mikroyapısal Özelliklerinin Araştırılması

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), 21 - 23 Haziran 2019, (Tam Metin Bildiri)

Boron Based Coatings for Strategic Applications: Typical Research Results

EFEOĞLU İ., KELEŞ A., TOTİK Y.

ICANAS 2019 4th INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCES, 19 - 22 Haziran 2019, (Tam Metin Bildiri)

Investigation of Hardness and Microstructural Properties of AA7075 Alloy by ECAP Method

Yılmaz T. A., Totik Y., Lule Senoz G. M., Senocak T. Ç., Efeoglu İ.

2. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia (IMSMATEC 2019) , Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1157-1159, (Tam Metin Bildiri)

EKAP Yöntemi ile AA7075 Alaşımının Sertlik ve Mikroyapısal Özelliklerinin Araştırılması

YILMAZ T. A., TOTİK Y., LÜLE ŞENÖZ G. M., ŞENOCAK T. Ç., EFEOĞLU İ.

The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia / TURKEY (IMSMATEC 2019), Nevşehir, Türkiye, 21 - 23 Haziran 2019, ss.1, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of Boron Based Films Grown by HiPIMS Under Different N2 Contents”,

KELEŞ A., EFEOĞLU İ., TOTİK Y.

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films, TownCountry Convention Center,San Diego,CA,USA, 19 - 24 Mayıs 2019, (Özet Bildiri)

Optimization for Adhesion Properties of c-BN Films Coated with HiPIMS,

EFEOĞLU İ., TOTİK Y., KELEŞ A.

ICMCTF19, 46th International Conference on Metallurgical Coatings and Thin Films TownCountry Convention Center,San Diego,CA,USA, 19 - 24 Mayıs 2019, (Özet Bildiri)

Influence Target Voltage on The Mechanical and Tribological Properties of c-BN Films Coated with HiPIMS

EFEOĞLU İ., TOTİK Y., KELEŞ A.

International Symposium on Boron (BORON2019) Nevşehir Hacı Bektaş Veli University, Nevşehir, Turkey, 17 - 19 Nisan 2019, (Tam Metin Bildiri)

Mechanical, Structural and Tribological Properties of TiAlZrN Coated AISI H13 Steel

SERT Y., KARA L., KÜÇÜKÖMEROĞLU T., EFEOĞLU İ.

International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, cilt.1, ss.1019-1022, (Tam Metin Bildiri)

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılması

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., BARAN Ö.

15.Uluslararası Korozyon Sempozyumu, 26 - 28 Eylül 2018, (Tam Metin Bildiri)

TİTANYUM BİYOMALZEMELERİN TRİBOKOROZYON ÖZELLİKLERİNİN ARAŞTIRILMASI

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., ARMAĞAN A. N.

15. ULUSLARARASI KOROZYON SEMPOZYUMU, 26 - 28 Eylül 2018, (Tam Metin Bildiri)

TİTANYUM ALAŞIMLARININ DLC KAPLAMA SONRASI TRİBOKOROZYON ÖZELLİKLERİNİN İNCELENMESİ

ŞÜKÜROĞLU S., ŞÜKÜROĞLU E. E., TOTİK Y., EFEOĞLU İ., ARMAĞAN A. N.

15. ULUSLARARASI KOROZYON SEMPOZYUMU, 26 - 28 Eylül 2018, (Tam Metin Bildiri)

Titanyum Alaşımlarının DLC Kaplama Sonrası Tribokorozyon Özelliklerinin Araştırılması

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 26 - 29 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Titanyum Alaşımlarının DLC Kaplama Sonrası Tribokorozyon Özelliklerinin Araştırılması

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 26 - 29 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılmas

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ., Baran Ö.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Investigation of mechanical and tribological properties of BCN thin films

GÜLTEN G., EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

Science and Applications of Thin Films, Conference Exhibition (SATF 2018), 17 - 21 Eylül 2018, (Tam Metin Bildiri)

Inverstigation of mechanical and tribological properties of BCN thin films

GÜLTEN G., EFEOĞLU İ., TOTİK Y., KELEŞ A., ERSOY K., DURKAYA G.

SATF 18, 17 - 21 Eylül 2018, (Tam Metin Bildiri)

Investigation of mechanical and tribological properties of BCN thin films

TOTİK Y., Gülten G., Efeoğlu İ., Keleş A., Ersoy K., Durkaya G.

SATF15, İzmir, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

The Adhesion Properties of c-BN Films Coated Using HiPIMS and Pulsed-dc Magnetron Sputtering

EFEOĞLU İ., TOTİK Y., KELEŞ A., GÜLTEN G., ERSOY K., DURKAYA G.

SATF, 17 - 21 Eylül 2018, (Tam Metin Bildiri)

Investigation of mechanical and tribological properties of BCN thin films

TOTİK Y., Gülten G., Efeoğlu İ., Keleş A., Ersoy K., Durkaya G.

SATF15, İzmir, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

Titanyum Biyo Malzemelerin Tribokorozyon Özelliklerinin Araştırılmas

TOTİK Y., Şüküroğlu E. E., Şüküroğlu S., Efeoğlu İ., Baran Ö.

15:Uluslararası Korozyon Sempozyumu, Hatay, Türkiye, 21 - 25 Eylül 2018, ss.1-5, (Tam Metin Bildiri)

The Effect of Deposition Parameters on the Wear and Scratch Properties of TiAlZrN Coatings

SERT Y., KÜÇÜKÖMEROĞLU T., KARA L., EFEOĞLU İ.

International Science Applications of Thin Films, Conference Exhibition (SATF 2018), 17 - 21 Eylül 2018, cilt.1, ss.13-21, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films”, he International Conference on Metallurgical Coatings and Thin Films

EFEOĞLU İ., ahmad A., KELEŞ A., BARAN Ö., TOTİK Y.

ICMCTF 2018, 23 - 27 Nisan 2018, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings

Aghdam H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2018), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, (Özet Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material

Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.93, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material

Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.93, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFEOĞLU İ., Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.87, (Tam Metin Bildiri)

The Mechanical and Tribological Properties of TiZrNbN and TiZrNbN-Cu Films

EFEOĞLU İ., Ahmad AGHDAM H., KELEŞ A., BARAN Ö., TOTİK Y.

he International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, Amerika Birleşik Devletleri, 23 - 27 Nisan 2018, ss.87, (Tam Metin Bildiri)

The Effect of Cu on Fatigue Properties of TiZrNbN Coatings on Cutting Tool Material”, he International Conference on Metallurgical Coatings and Thin Films

ahmad A., KELEŞ A., BARAN Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF 2018, 23 - 27 Nisan 2018, (Tam Metin Bildiri)

Comparison of Functional Composite Thin Films Deposited by CFUBMS PVD Using Differantial Power Sources

EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials, 22 - 24 Mart 2018, (Tam Metin Bildiri)

Toz Metalurji Yöntemi İle Üretilmiş AA7075 Taban Malzeme Üzerine KaplanmışMoS2-TiB2 Kompozit Filmin Yapısal Mekanik Ve Tribolojik Özelliklerin Araştırılması

YILMAZ T. A., LÜLE ŞENÖZ G. M., EFEOĞLU İ., TOTİK Y., KELEŞ A.

!.International Symposium on Light Alloys Composite Materials, 22 - 24 Mart 2018, (Tam Metin Bildiri)

Toz Metalurjisi Yöntemiyle Üretilmiş AA7075 Taban Malzeme Üzerine Kaplanan MoS2-TiB2 Kompozit Filmin Yapısal, Mekanik ve Tribolojik Özelliklerinin Araştırılması

Yılmaz T. A., Lule Senoz G. M., Efeoglu İ., Totik Y., Keles A.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.236-237, (Özet Bildiri)

Toz Metalurjisi Yöntemiyle Üretilmiş AA7075 Taban Malzeme Üzerine Kaplanan MoS2-TiB2 Kompozit Filmin Yapısal, Mekanik ve Tribolojik Özelliklerinin Araştırılması

YILMAZ T. A., LÜLE ŞENÖZ G. M., EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.236-237, (Özet Bildiri)

Comparison of Functional Composite Thin Films Deposited by CFUBMS-PVD Using Different Power Sources

EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.242-243, (Özet Bildiri)

Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., BİLGİN E. E., KELEŞ A., EFEOĞLU İ., KARA L.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.182, (Özet Bildiri)

Comparison of Functional Composite Thin Films Deposited by CFUBMS-PVD Using Different Power Sources

EFEOĞLU İ., TOTİK Y., KELEŞ A.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.242-243, (Özet Bildiri)

Magnetron Sıçratma Yöntemiyle D2 Soğuk İş Takım Çeliğine Kaplanmış TiN Kaplamaların Adezyon ve Tribolojik Özelliklerine Taban Malzeme Sıcaklığının Etkisi

BARAN Ö., BİLGİN E. E., KELEŞ A., EFEOĞLU İ., KARA L.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.182, (Özet Bildiri)

Tribological Behaviour of Ti:Ta-DLC Films Under Different Tribo-Test Conditions

EFEOĞLU İ., KELEŞ A., TOTİK Y., Cicek H., Sukuroglu E. E.

9th International Conference on Tribology (Balkantrib), Türkiye, 13 - 15 Eylül 2017, cilt.295, (Tam Metin Bildiri)

Growth of Antibacterial Coatings by Plasma Electrolytic Oxidation

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., TOTİK Y., EFEOĞLU İ., AYDIN K.

icadet, 21 - 23 Eylül 2017, (Özet Bildiri)

Plazma Elektrolitik Oksidasyon Yöntemiyle Antibakteriyel Kaplamaların Büyütülmesi

Şüküroğlu S., Şüküroğlu E., TOTİK Y., EFEOĞLU İ., Aydın K.

ICADET, II. Int. Conf. On Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 29 Eylül 2017, (Tam Metin Bildiri)

Plazma Elektrolitik Oksidasyon Yöntemiyle Antibakteriyel Kaplamaların Büyütülmesi

Şüküroğlu S., Şüküroğlu E., TOTİK Y., EFEOĞLU İ., Aydın K.

ICADET, II. Int. Conf. On Advanced Engineering Technologies, Bayburt, Türkiye, 21 - 29 Eylül 2017, (Tam Metin Bildiri)

Comparing of Adhesion Properties of TiNbVN Coatings Deposited on Different Substrates

EFEOĞLU İ., TOTİK Y., BARAN Ö., ÇİÇEK H., KELEŞ A.

The International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 24 - 28 Nisan 2017, (Özet Bildiri)

A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates

ÇİÇEK H., BARAN Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 Nisan 2017, (Özet Bildiri)

The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy

BARAN Ö., KELEŞ A., ÇİÇEK H., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 Nisan 2017, (Özet Bildiri)

Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels

KELEŞ A., ÇİÇEK H., BARAN Ö., TOTİK Y., EFEOĞLU İ.

44.ICMCTF, 24 - 28 Nisan 2017, (Özet Bildiri)

The mechanical and tribological properties of Ti(Nb, V) N films on the 2024 Al-alloy

Baran Ö., KELEŞ A., Çiçek H., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Compearing of adhesion properties of TiNbVN coatings deposited on differant sunbstrates

EFEOĞLU İ., TOTİK Y., Baran Ö., KELEŞ A., Çiçek H.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Detemining of the critical loads of transition metal nitrides on steels

KELEŞ A., Çiçek H., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF16, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

A comparative study of fatique properties of TiVN and TiNbN thin films deposited on differant substrates

Çiçek H., Baran Ö., KELEŞ A., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Detemining of the critical loads of transition metal nitrides on steels

KELEŞ A., Çiçek H., Baran Ö., TOTİK Y., EFEOĞLU İ.

ICMCTF16, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Compearing of adhesion properties of TiNbVN coatings deposited on differant sunbstrates

EFEOĞLU İ., TOTİK Y., Baran Ö., KELEŞ A., Çiçek H.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

The mechanical and tribological properties of Ti(Nb, V) N films on the 2024 Al-alloy

Baran Ö., KELEŞ A., Çiçek H., TOTİK Y., EFEOĞLU İ.

ICMCTF17, 44th Int. Conf. on Metallurgical Coatings and Thin Films7, San Diago, Amerika Birleşik Devletleri, 23 - 28 Nisan 2017, (Tam Metin Bildiri)

Bor Nitrür BN Esaslı İnce Film Kaplamalar ve Teknolojik Uygulamaları Üzerine Ar Ge Çalışması

EFEOĞLU İ., KELEŞ A., TOTİK Y., ÇİÇEK H.

2.Aselsan Malzeme Çalıştayı, Türkiye, 15 Kasım 2016, (Tam Metin Bildiri)

c Bn based BN Thin Film Synthesis and Investigation The Structural Mechanical Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A.

ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Friction and Wear Characteristics of Me DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., ŞÜKÜROĞLU E. E., EZİRMİK K. V.

ICMTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Fetigue and Adhesion Properties of Martenzite and Austinite Phases of TiNi Shape Memory Thin Film Deposited by Magnetron Sputtering

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V.

ICMCTF, 25 Mayıs 2016, (Tam Metin Bildiri)

Investigation of In Vitro Properties NiTi After MAO Coatings

ŞÜKÜROĞLU S., TOTİK Y., ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ.

. ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

Investigation of adhesionfetigue properties of Micro Arc Oxidation Coatings on AZ91 Magnesium Alloys

ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ., TOTİK Y.

ICMCTF2016, 25 Mayıs 2016, (Tam Metin Bildiri)

nvestigation of Adhesion and Fatigue Properties of Micro Arc Oxidation Coatings on AZ91 Magnesium Alloys

ŞÜKÜROĞLU E. E., ARSLAN E., EFEOĞLU İ., TOTİK Y., ŞÜKÜROĞLU S.

ICTMCF 2016, 25 - 28 Nisan 2016

Investigation of In Vitro Properties of NiTi After MAO Coatings

ŞÜKÜROĞLU S., ŞÜKÜROĞLU E. E., TOTİK Y., ARSLAN E., EFEOĞLU İ.

ICMCTF 2016, 25 - 28 Nisan 2016

Investigation of adhesionfetigue properties of Micro-Arc Oxidation Coatings on AZ91 Magnesium Alloys

Demirci E., ARSLAN E., EFEOĞLU İ., TOTİK Y.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

The Effect of TiO2 Coatings on NiTİ Alloys After MAO Treatment for Corrosion Resistance

Akar K., TOTİK Y., EFEOĞLU İ., Demirci E., ARSLAN E., Şüküroğlu S.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Fatigue and Adhesion Properties of Martensite and Austenite Phases of TiNi Shape Memory Thin Films Deposited by Magnetron Sputtering

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V.

International Conference on Metallurgical Coatings and Thin Films (ICMCTF) 2016, 25 - 29 Nisan 2016, (Özet Bildiri)

Investigation of adhesionfetigue properties of Micro-Arc Oxidation Coatings on AZ91 Magnesium Alloys

Demirci E., ARSLAN E., EFEOĞLU İ., TOTİK Y.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Friction and Wear Characteritics of Me DLC Coatings Under Different Tribo Test Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., ÇİÇEK H., ŞÜKÜROĞLU E. E., EZİRMİK K. V.

International Conference on Metallurgical Coatings and Thin Films (ICMCTF)2016, 25 - 29 Nisan 2016, (Özet Bildiri)

Friction and Wear Characteristics of Me-DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., Çiçek H., Demirci E., EZİRMİK K. V.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Friction and Wear Characteristics of Me-DLC Coatings Under Differant Tribotest Conditions

KELEŞ A., EFEOĞLU İ., TOTİK Y., Çiçek H., Demirci E., EZİRMİK K. V.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

The Effect of TiO2 Coatings on NiTİ Alloys After MAO Treatment for Corrosion Resistance

Akar K., TOTİK Y., EFEOĞLU İ., Demirci E., ARSLAN E., Şüküroğlu S.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Investigation of In-Vitro Properties NiTi After MAO Coatings

Şüküroğlu S., TOTİK Y., Demirci E., ARSLAN E., EFEOĞLU İ.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

c-BN based BN Thin Film Synthesis and Investigation The Structural-Mechanical-Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A., Ersoy K., Durkaya G.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Investigation of In-Vitro Properties NiTi After MAO Coatings

Şüküroğlu S., TOTİK Y., Demirci E., ARSLAN E., EFEOĞLU İ.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

c-BN based BN Thin Film Synthesis and Investigation The Structural-Mechanical-Tribological Properties

EFEOĞLU İ., TOTİK Y., KELEŞ A., Ersoy K., Durkaya G.

ICMCTF16, 43th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 25 - 29 Nisan 2016, (Tam Metin Bildiri)

Titanyum-Nikel Şekil Hafızalı Filmlerin Magnetron Sıçratma Yöntemiyle Kristal Yapıda Büyütülmesi

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V.

Mühendislikte Yeni Teknolojiler (MYT-2015), Bayburt, Türkiye, 22 - 23 Ekim 2015, (Özet Bildiri)

Kendinden Yağlayıcı Katı İnce Filmler DLC MoS2 ve h BN Esaslı İnce Filmler Üzerine Ar Ge Çalışmaları

EFEOĞLU İ.

ASELSAN 1. Malzeme Teknolojileri Çalıştayı, Türkiye, 14 - 15 Eylül 2015

Magnetron Sıçratma Yöntemi ile Kristal Yapıda TiNi Şekil Hafızalı Filmlerin Büyütülmesi

EFEOĞLU İ., ÇİÇEK H.

ASELSAN 1. Malzeme Teknolojileri Çalıştayı, Türkiye, 14 - 15 Eylül 2015

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Coatings

Küçükömeroğlu T., Baran Ö., EFEOĞLU İ., Kara L.

EUROMAT2015 European Congress and Exhibition on Advanced Materials and Process, Varsow, Polonya, 20 - 24 Eylül 2015, (Tam Metin Bildiri)

Tribocorrosion Properties of MAO DLC Coatings Using a DuplexProcess on Cp Ti Alloys

ŞÜKÜROĞLU E. E., ŞÜKÜROĞLU S., ARSLAN E., TOTİK Y., EFEOĞLU İ.

The International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 18 - 23 Mayıs 2015

Tribocorrosion Properties of Metal Doped DLC Thin Films

ARSLAN E., TOTİK Y., EZİRMİK K. V., ŞÜKÜROĞLU E. E., ÇİÇEK H., KELEŞ A., et al.

The International Conference on Metallurgical Coatings and Thin Films (ICMCTF), 18 - 23 Mayıs 2015, (Tam Metin Bildiri)

High Temperature Oxidation of CrAlYN CrY Thin Films andAdhesion Properties

TAHMASEBİAN MYANDOAB M., EFEOĞLU İ., EZİRMİK K. V., TOTİK Y., ARSLAN E., ÇİÇEK H.

ICMCTF 2015, 21 - 24 Nisan 2015

Low Temperature In situ Crystallization TiNi ShapeMemory Thin Film Deposited by Magnetron Sputtering

ÇİÇEK H., EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E.

ICMCTF 2015, 21 - 24 Nisan 2015, (Özet Bildiri)

Tribocorrosion Properties of Metal Doped-DLC Coatings

ARSLAN E., TOTİK Y., EZİRMİK K. V., Demirci E., Çiçek H., KELEŞ A., et al.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Tam Metin Bildiri)

Tribocorrosion Properties of Metal Doped-DLC Coatings

ARSLAN E., TOTİK Y., EZİRMİK K. V., Demirci E., Çiçek H., KELEŞ A., et al.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Tam Metin Bildiri)

Friction and Wear Properties of Ti:Ta Doped DLC Coatings

EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E., KELEŞ A., Demirci E.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Tam Metin Bildiri)

Friction and Wear Properties of Ti:Ta Doped DLC Coatings

EFEOĞLU İ., TOTİK Y., EZİRMİK K. V., ARSLAN E., KELEŞ A., Demirci E.

ICMCTF15, 42nd Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 20 - 24 Nisan 2015, (Tam Metin Bildiri)

Savunma Teknolojilerinde Yüzey Mühendisliği ve Ar Ge Çalışmaları

EFEOĞLU İ.

Mühendislikte Yeni Teknolojiler Sempozyumu, Türkiye, 22 - 24 Ekim 2015

Effect of Deposition Parameters on the Tribological Properties of Ti DLC Films

Kurucu K., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Türkiye, 25 - 27 Haziran 2014, ss.56, (Tam Metin Bildiri)

The Tribological Properties of TiAlN TiCrN Multilayer Coatings Produced by CFUBMS

LALOĞLU Ç., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Türkiye, 25 - 27 Haziran 2014, ss.55, (Tam Metin Bildiri)

The Tribological Properties of TiAlN TiCrN Multilayer Coatings Produced by CFUBMS

LALOĞLU Ç., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Türkiye, 25 - 27 Haziran 2014, ss.55, (Tam Metin Bildiri)

Effect of Deposition Parameters on the Tribological Properties of Ti DLC Films

Kurucu K., EFEOĞLU İ., TOTİK Y., ARSLAN E., EZİRMİK K. V., Şüküroğlu E. E., et al.

2. Uluslararası Yüzey İşlemleri Sempozyumu 2014, İstanbul, Türkiye, 25 - 27 Haziran 2014, ss.56, (Tam Metin Bildiri)

Structural, Mechanical and Tribological Properties of VN Thin Films Fabricated by PVD

Aghdam H., EFEOĞLU İ., EZİRMİK K. V., Çiçek H., Tahmasabian M., Baran Ö.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 - 02 Nisan 2014, (Tam Metin Bildiri)

The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

Baran Ö., Bidev F., Çiçek H., Kara L., EFEOĞLU İ., Küçükömeroğlu T.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

The Effect of Pulse and Bias DC Voltage on Crystallization of TiNi Shape Memory Thin Films Deposited by Unbalanced Magnetron Sputtering

Çiçek H., EFEOĞLU İ., Baran Ö., TOTİK Y.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

The Effect of Deposition Parameters on the Tribological Properties of TiAlCrNbN Thin Films

Kara L., Baran Ö., Küçükömeroğlu T., EFEOĞLU İ.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

The Effect of Pulse and Bias DC Voltage on Crystallization of TiNi Shape Memory Thin Films Deposited by Unbalanced Magnetron Sputtering

Çiçek H., EFEOĞLU İ., Baran Ö., TOTİK Y.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

Structural Mechanical and Tribological Properties of VN Thin FilmsFabricated by PVD

Aghdam H., EFEOĞLU İ., EZİRMİK K. V., ÇİÇEK H., Tahmasebian Myandoab M., BARAN Ö.

International Conference on MetallurgicalCoatings and Thin Films ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.44, (Özet Bildiri)

The Friction and Wear Properties at Room Temperature and Vacuum Atmosphere of Ti/TiB2/MoS2 Graded-Composite Coatings Deposited by CFUBMS

Baran Ö., Bidev F., Çiçek H., Kara L., EFEOĞLU İ., Küçükömeroğlu T.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

. Investigation of Adhesion and Corrosion Properties of CrAlYN/CrY Multilayer Coatings Deposited by Unbalanced Magnetron Sputtering

Tahmasabian M., EFEOĞLU İ., EZİRMİK K. V., ARSLAN E., TOTİK Y., Demirci E., et al.

ICMCTF14, 41th Int. Conf. on Metallurgical Coatings and Thin Films, San Diago, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, (Tam Metin Bildiri)

Investigation of Adhesion and Corrosion Properties of CrAlYN CrY Multilayer Coatings Deposited by Unbalanced Magnetron Sputtering

Tahmasebian Myandoab M., EFEOĞLU İ., EZİRMİK K. V., ARSLAN E., TOTİK Y., Şüküroğlu E. E., et al.

International Conference on MetallurgicalCoatings and Thin Films ICMCTF 2014, San Diego, Amerika Birleşik Devletleri, 28 Nisan - 02 Mayıs 2014, ss.55, (Tam Metin Bildiri)